WD9900A
0020504193
WIRING CIRCUIT (WD9900A)
I1=ON/OFF I2=SAVE WATER
G Delay start dial
C
F
B
A
D E G
Turn this knob to preset a delay time within a range of
0-12 hours. This function is used before washing as
needed. After selection of a delay time, press the
power button, the power indicator line, the delay time
ends and the machine starts and enters the washing
period.
This knob can be turned any times during the start
delay period to change the delay time.
Important: If you want to select a delay time less than
on hour in the use of this start delay function, you
should first turn the knob clockwise to make the
indicator line point to a position beyond the position "I"
on the dial , and then slowly turn it back to the position
of a time you need, otherwise the delay start function
will not work.
G
7
8
9
10
11
12
6
5
4
3
2
1
0
h
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
Haier WD9900AP User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Maytag MAH6700AW Series Service
-
Simpson SWF10732 User manual
-
-
Aeg-Electrolux F30010IM User manual
-
Amana AO27SE User manual
-
-
Electrolux ESF63020X User manual
-
Candy CDB 115-80 User manual
-
-
Hoover Washer dryer User manual