Zenith DVR413 Quick Setup Manual
- Category
- Audio equalizers
- Type
- Quick Setup Manual
STEP 1
Connections
Quick Setup Guide
DVD Recorder to TV Connections
a Connect the “Antenna” or “Cable TV”
service wire to the “ANT. IN” jack on
the DVD Recorder using a coaxial
RF Cable.
b Connect the RF.OUT jack from the
DVD Recorder to the Antenna Input
jack on the TV using the RF Cable
supplied.
And/Or
Connect the “A/V OUT” jacks from
the DVD Recorder to the “VIDEO IN”
and “AUDIO IN” jacks on the TV
using the RCA-type Cables supplied.
c Turn the TV on and select the video
input source connected to the DVD
Recorder.
Antenna Input Connection: Tune the
TV to channel 3 or 4.
Audio/Video Connections: Tune the
TV to the video input source.
a Connect the AV 1 IN or AV 2 IN jacks
from the DVD Recorder to the
Audio/Video out jacks on your exter-
nal A/V device, using optional
audio/video cables.
b Use a DV Cable (not supplied) to
connect the DV in/out jack from your
DV Digital Camcorder to the front
panel DV IN jack on the DVD
Recorder.
Note: See the owner’s manual for
more detailed advanced connec-
tions.
DVR413
Antenna/Cable TV
Wall Jack
OR
Antenna
DVD Recorder’s Connection Panel
RF Cable Video CableAudio Cable
Coaxial
RF Cable
ANTENNA
INPUT
L
R
Y
Pb
Pr
COMPONENT VIDEO INPUT
AUDIO INPUT
VIDEO
INPUT
S-VIDEO
INPUT
c
b
a
Call us and we will
guide you through
your first recording,
for free.
CCaallll 11--887777--99ZZeenniitthh
((11--887777--999933--66448844))
Connecting Accessory Equipment
P/NO: 3840R-Q031S
STEP 2 Pre-operation Setup
EZ Channel Scan
About DVD Recording
Follow these instructions to scan for channels if you are
using an antenna or basic cable TV connection.
a Press SETUP.
The Setup menu appears.
b Press
BB
to select Tuning Band then press
BB
again.
c Use
vv
/
VV
to select TV or CATV then press ENTER.
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
d Use
vv
/
VV
to select the EZ Channel Scan option.
e Use
BB
to highlight Start then press ENTER to begin the
channel search.
The tuner will automatically search for all available chan-
nels in the area and place them in the tuner’s
memory. After scanning is complete,the DVD Recorder
tunes to the lowest channel number found.Press SETUP to
exit the Setup menu.
NOTE : To add or erase channels from memory, see the
Owner’s Manual for details.
Searching 11%
Stop
Tuning Band
EZ Channel Scan
Ch. Add/Del
Clock Set
TV Aspect
Display Mode
Progressive Scan
Factory Set
Recordable Discs
DVD-RW (Digital Video Disc - ReWritable):
These Discs can be recorded on repeatedly.
Recordings can be erased, then you can
record again on the same Disc.
DVD-R (Digital Video Disc - Recordable):
These Discs can be recorded only once.
After you finalize a DVD-R, you cannot
record on it or edit it.
DVD+RW (Digital Video Disc + ReWritable):
These Discs can be recorded on repeatedly.
Recordings can be erased, then you can
record again on the same Disc.
DVD+R (Digital Video Disc + Recordable):
These Discs can be recorded only once.
After you finalize a DVD+R, you cannot
record on it or edit.
What are ‘recording modes’ for DVD-RW?
There are two recording modes available using
DVD-RW disc: VR mode and Video mode. When
recording to a DVD-R disc, recordings are always in
Video mode. DVD-RW discs can be formatted for VR
mode recording or Video mode recording.
VR mode recording
• Not playable on regular DVD players
• Recordings can be extensively edited
Video mode recording
• Playable on regular DVD players (after finalizing)
• Limited editing features
Recording time and picture quality
There are four preset recording quality modes:
HQ (High Quality) – about 1 hour/disc
SQ (Standard Quality) – about 2 hour/disc
LQ (Low Quality) – about 4 hour/disc
EQ (Extended Quality) – about 6 hour/disc
STEP 3
DVD Recording
Step by Step DVD Recording
Follow these steps to make your first DVD Recording.
a Load a recordable disc into the disc tray.
• If you load a completely blank disc, the Recorder will ini-
tialize the disc.
DVD-R: The Recorder initializes the disc for Video mode.
The recording mode will always be Video mode.
DVD-RW: The Recorder initializes the disc for VR mode.
DVD+R: The Initialize menu appears. Select “Yes” then
press ENTER.
DVD+RW: The Recorder initializes the disc for DVD+RW
mode.
• Also, you can format the disc from the Setup menu as
described in step 4.
b Set the Recording Mode.
• Press REC MODE to set the Record Mode to HQ, SQ,
LQ, or EQ.
• The amount of available recordable space on the disc
appears on the On-Screen Display.
c Specify source to record.
• Use CH v / V buttons to select the channel you want to
record.
• If you are recording from a Camcorder or other external
device, use AV to select input source
AV1: AUDIO IN 1 / VIDEO IN 1 jacks on back panel
AV2: INPUT 2 (VIDEO, AUDIO (L/R), S-VIDEO IN) jacks
on front panel
DV: DV IN port on front panel.
d Start recording.
• Press REC to start recording.
e Pause/Stop recording.
• Press PAUSE/STEP (X) to pause recording.
Press PAUSE/STEP (X) again or REC (z) to continue the
recording.
• After recording is complete, press STOP (x).
A message appears for a few moments while the
Recorder stops recording and adds the new title to the
disc menu.
• Use MENU/LIST to review the contents of your recorded
disc.
STEP 4
Initialize & Finalize
Disc Initialization using Setup Menu
You can format the disc from the Setup menu as described
below.
Caution
If you want to change the disc format, everything recorded on the
disc will be erased.
a Press SETUP.
The Setup menu appears.
b Use v / V to select the Disc option.
c While the Disc option is selected, press B to move to the
second level.
d Use v / V to select the Disc Format option.
e Press B to move to the third level.
Start icon is highlighted.
f Press ENTER.
Disc Format menu appears.
g For DVD-RW discs, use b / B to select a desired Disc
Format Mode (VR Mode or Video Mode) then press
ENTER.
For DVD+RW discs, go to step 8.
h Use b / B to select “Ok” then press ENTER.
It takes a few moments to format the disc.
If you want your recorded discs to be compatible with other
DVD players, you MUST finalize them:
a Follow steps 1-3 as shown above (Disc Initialize using
Setup Menu).
b Use the v / V buttons to select the “Finalize” option, then
press ENTER.
c Use the b / B buttons to select “Ok”, then press ENTER.
Disc Finalization may take a few minutes to complete.
d Press SETUP to exit the menu.
Disc Finalize
Start
Disc Format
Finalize
Disc Label
Disc Protect
Select a Mode
Disc Format
Video ModeVr Mode
Ok
All data on the disc will be deleted.
Proceed?
Disc Format
Cancel
Finalize
Unfinalize
Disc Format
Finalize
Disc Label
Disc Protect
Ok
Do you want finalization?
Finalize
Cancel
-
1
-
2
-
3
-
4
Zenith DVR413 Quick Setup Manual
- Category
- Audio equalizers
- Type
- Quick Setup Manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI