Behringer AES808 Owner's manual

Type
Owner's manual

Behringer AES808 is an AES/EBU-compatible interface for the digital mixing console BEHRINGER DXD3216. It has 8 AES/EBU-compliant inputs and outputs (each with 4 stereo inputs/4 stereo outputs). The AES808 can be connected to the BEHRINGER CONNECTOR BOX ACB808P using a 25-pin D-Sub cable.

The AES808 is easy to install and operate. Simply switch off the mixing console, insert the interface into one of the two expansion slots on the console, and fasten it with screws. Then, connect the CONNECTOR BOX to the interface using the included D-Sub 25 cable. Finally, switch on the mixing console and the AES808 is ready for operation.

Behringer AES808 is an AES/EBU-compatible interface for the digital mixing console BEHRINGER DXD3216. It has 8 AES/EBU-compliant inputs and outputs (each with 4 stereo inputs/4 stereo outputs). The AES808 can be connected to the BEHRINGER CONNECTOR BOX ACB808P using a 25-pin D-Sub cable.

The AES808 is easy to install and operate. Simply switch off the mixing console, insert the interface into one of the two expansion slots on the console, and fasten it with screws. Then, connect the CONNECTOR BOX to the interface using the included D-Sub 25 cable. Finally, switch on the mixing console and the AES808 is ready for operation.

AES/EBU INTERFACE AES808
Installation manual
Dear Customer!
Welcome to the team of AES808 users and thank you very much for expressing your confidence in
BEHRINGER products by purchasing this interface. Although it is really easy to install and operate
the AES808, we would like to give you a concise introduction to the features of this AES/EBU-
compatible interface for our digital mixing console BEHRINGER DXD3216. The AES808 has 8
AES/EBU-compliant inputs and outputs (each with 4 stereo inputs/4 stereo outputs) and can be
connected to the BEHRINGER CONNECTOR BOX ACB808P using a 25-pin D-Sub cable.
Your BEHRINGER AES808 was carefully packed in the factory and the packaging is designed to
protect the unit from rough handling. Nevertheless, we recommend that you carefully examine the
packaging and its contents for any signs of physical damage, which may have occurred during
transit.
+ If the unit is damaged, please do not return it to BEHRINGER, but notify your dealer
and the shipping company immediately, otherwise claims for damage or replacement
may not be granted. Shipping claims must be made by the consignee.
+ Static electricity can severely damage electronic components. Before you touch
any electronic component, please be sure to discharge any static electricity by
touching the metal frame of your DDX3216. Hold the interface on its edges or the
two little handles, but never touch the components themselves!
s Switch off the mixing console.
s To install the interface slacken the screws holding the cover over one of the two expansion
slots on your digital mixing console BEHRINGER DDX3216. Keep the cover for later re-use!
s Hold the interface on its two handles of the connecting panel, and insert it completely into the
expansion slot. Then, fasten the interface with the screws that held the expansion slot cover
before.
I Use the enclosed D-Sub 25 cable to connect the CONNECTOR BOX to the AES808 interface.
s Switch on the mixing console. Now, the AES808 is ready for operation.
+ Routing issues are described in the user’s manual accompanying your digital mixing
console BEHRINGER DDX3216.
Version 1.0 April 2001
ENGLISH
www.behringer.com
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
Installing the AES808
Specifications:
Digital input/output
Type 25 Pol D-Sub
Standard AES/EBU-compatible
Terms of the warranty
+ For our current warranty terms, please refer to our website at
http://www.behringer.com, or send us a request via e-mail at [email protected], fax
at +49 2154 920 665, or telephone at +49 2154 920 666.
  • Page 1 1
  • Page 2 2

Behringer AES808 Owner's manual

Type
Owner's manual

Behringer AES808 is an AES/EBU-compatible interface for the digital mixing console BEHRINGER DXD3216. It has 8 AES/EBU-compliant inputs and outputs (each with 4 stereo inputs/4 stereo outputs). The AES808 can be connected to the BEHRINGER CONNECTOR BOX ACB808P using a 25-pin D-Sub cable.

The AES808 is easy to install and operate. Simply switch off the mixing console, insert the interface into one of the two expansion slots on the console, and fasten it with screws. Then, connect the CONNECTOR BOX to the interface using the included D-Sub 25 cable. Finally, switch on the mixing console and the AES808 is ready for operation.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI