Toto WT173M Installation guide

Toto
Brand
Toto
Model
WT173M
Type
Installation guide

Toto WT173M is an in-wall tank unit that provides dual-flush capabilities, allowing you to choose between a 1.28 GPF and 0.9 GPF flush. This can help you save water and money on your water bill. The unit also has an auto flush function capability, which can be convenient for hands-free flushing. The adjustable mounting height (15"-19") and support up to 880 lbs. make it easy to install and use. The unit comes with a copper supply line and is pre-plumbed for WASHLET® connection, making it easy to add a bidet to your bathroom. It meets and exceeds ASME A112.6.2, IAPMO PS50, CSA B125.

Toto WT173M is an in-wall tank unit that provides dual-flush capabilities, allowing you to choose between a 1.28 GPF and 0.9 GPF flush. This can help you save water and money on your water bill. The unit also has an auto flush function capability, which can be convenient for hands-free flushing. The adjustable mounting height (15"-19") and support up to 880 lbs. make it easy to install and use. The unit comes with a copper supply line and is pre-plumbed for WASHLET® connection, making it easy to add a bidet to your bathroom. It meets and exceeds ASME A112.6.2, IAPMO PS50, CSA B125.

WT173M(A)
DUOFIT
®
In-Wall Tank Unit, 1.28 GPF & 0.9 GPF
FEATURES
• Dual Flushing system, low consumption
(1.28 GPF/4.8 LPF & 0.9 GPF/3.4 LPF)
• Auto Flush function capability
• Adjustable 15"-19" mounting height
• Support up to 880 lbs.
• Commercial 2" x 6" or optional residential installa-
tion with 2" x 4" wall studs with waste outlet kit
• 1-pc blow molded, insulated polyethylene tank to
prevent leaks and sweating
• 2" x 6" Polyethylene outlet included
• Pre-plumbed for WASHLET
®
connection
• Copper supply line
MODELS
• WT173M - with copper washlet supply line
• WT173MA - Same as WT173M with Auto Flush
connection
Required Push Plates (Sold Separately)
• YT920 #MS - Matte Silver
#WH - White
YT930 #MS - Matte Silver
#WH - White
YT970 #SS - Stainless Steel
YT980 #SS - Stainless Steel
Compatible Outlets (Sold Separately)
• THU343 2" x 4" outlet HDPE & PVC
• THU335 2" x 6" outlet cast iron
Compatible Wall Hung Bowls (Sold Separately)
• CT447CFGT60 - RP WASHLET+ Wall-Hung Toilet
• CT449CFGT60 - SP WASHLET+ Wall-Hung Toilet
• CT426CFGT40 - AP WASHLET+ Wall-Hung Toilet
• CT428CFGT40 - EP WASHLET+ Wall-Hung Toilet
PRODUCT SPECIFICATION
This universal height, high-efficiency, dual flushing,
in-wall tank system toilet shall be 1.28 GPF & 0.9
GPF. Requires TOTO toilet model CT426CFGT40,
CT428CFGT40, CT447CFGT60, and CT449CFGT60.
In-Wall tank system shall be TOTO Model
WT173M______.
CODES/STANDARDS
• Meets and exceeds
o Carrier system: ASME A112.6.2
o Tank trim: IAPMO PS50, CSA B125.3,
ASSE1002
• Certifications: IAPMO(cUPC), *EPA Watersense,
State of Massachusetts, City of Los Angeles, and
others
• Code compliance: UPC, IPC, NSPC, NPC Canada,
and others
*WaterSense certification only applies to WT173M(A) when combined
with either model CT426CFGT40, CT428CFGT40, CT447CFGT60, and
CT449CFGT60 toilet bowls.
SPECIFICATIONS
DIMENSIONS
• Water Use 1.28 GPF & 0.9 GPF
(4.8 LPF & 3.4 LPF)
• Flush System Dual-Max
• Min. Water Pressure 8 psi (static)
• Installation Height 15" to 19" (projected range)
• Warranty One Year Limited Warranty
• Material Various
• Shipping Weight 43 lbs
• Shipping Dimensions 47-1/2" x 26" x 6"
WT173M(A)
DUOFIT In-Wall Tank Unit, 1.28 GPF & 0.9 GPF
# SS-01629 v.02Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com | © TOTO USA
INSTALLATION NOTES
These dimensions and specifications are subject to change without notice
Adequate structural bracing is required.
2"
[51mm]
7"
[180mm]
45
⅜
" - 50
⅜
"
[1150 - 1280 mm]
Drain Hole
℄
:
15"
[381mm]
1
3
4
" from front of frame
using 2"x4" installation kit
THU343
2"x4"
[51mm x 102mm]
Installation
Drain Hole
℄
:
1
3
4
" or 3
1
4
" from front
of frame using
Ø90mm Outlet Pipe
2"x6"
[51mm x 152mm]
or with Back Access
Installation
Finished Floor
*Refer to
Installation Manual
on the specific
Carrier height for
the desired height
of the toilet
Frame Work
Follow wall framing code
around the Carrier
23
3
4
"
[603mm]
3
1
2
"
[89mm]
5
1
2
"
[140mm]
Finished Wall
thickness
1
2
" to 2"
Finished Wall
thickness
1
2
" to 2"
45
15
16
"
[1167mm]
23
3
8
"
[593mm]
16
7
16
"
[418mm]
19"
[483mm]
20
7
16
"
[520mm]
1
2
" NPT Water
Supply to
Washlet
1
2
" NPT
Water
Supply
Proper
Installation
Improper
Installation
Baseboard
Uneven wall gap
Back of toilet even
with installation surface
1
16
" Wall gap
Finish wall
Finish wall
  • Page 1 1
  • Page 2 2

Toto WT173M Installation guide

Toto
Brand
Toto
Model
WT173M
Type
Installation guide

Toto WT173M is an in-wall tank unit that provides dual-flush capabilities, allowing you to choose between a 1.28 GPF and 0.9 GPF flush. This can help you save water and money on your water bill. The unit also has an auto flush function capability, which can be convenient for hands-free flushing. The adjustable mounting height (15"-19") and support up to 880 lbs. make it easy to install and use. The unit comes with a copper supply line and is pre-plumbed for WASHLET® connection, making it easy to add a bidet to your bathroom. It meets and exceeds ASME A112.6.2, IAPMO PS50, CSA B125.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents