Home Decorators Collection 2642M-PHO Operating instructions

Type
Operating instructions

This manual is also suitable for

5
WWW.HOMEDEPOT.COM/HOMEDECORATORS
Please
contact 1-800-986-3460 for further assistance.
Installation
1 2
Installing the crossbar
CAUTION:
Never rely on the wall switch alone to turn
off
power.
Attach the crossbar (CC) to the junction box using the
crossbar screws (AA).
AA
CC
C
the fixture
onnecting the wires and installing
Connect the bare ground wire from the fixture to the ground
wire from the junction box by twisting a wire nut (
B
B) onto
ends of the wires. Connect the white wire from the
junction box to the white wire from the fixture (A) by twisting
a wire nut (BB) onto the bare ends of the wires. Connect the
black wire from the junction box to the black wire from the
fixture (A) by twisting a second wire nut (BB) onto the bare
ends of the wires.
Make sure wire connections are secure. Carefully place the
wires into the junction box. Then secure the fixture (A)
with
the fixed nuts (DD).
NOTE:
The ground wire is green.
the bare
BB
DD
A
Installation (continued)
6
3 4
Installing the bulb and the lampshade
Apply silicone caulking adhesive (not included)
completely around the perimeter of the fixture (A)
where the back meets the mounting surface to
prevent water from seeping into the junction box.
Install the bulb (EE). Then install the lampshade (FF).
Turn power back on at the circuit breaker and switch
the wall switch to the ON position.
Sealing the
fixture
Installation (continued)
EE
FF
  • Page 1 1
  • Page 2 2

Home Decorators Collection 2642M-PHO Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI