Wacker Neuson PS23703 User manual

Operator’s Manual

Pump

P

S, 3-Phase

Type PS 3-Phase

Document 5000184964

Date

0817

Revision

08

Language EN

5000184964

Copyright notice

All rights, including copying and distribution rights, are reserved.

This publication may be photocopied by the original purchaser of the

machine. Any other type of reproduction is prohibited without express

written permission from Wacker Neuson Production Americas LLC.

Any type of reproduction or distribution not authorized by Wacker

Neuson Production Americas LLC represents an infringement of valid

copyrights. Violators will be prosecuted.

Trademarks

All trademarks referenced in this manual are the property of their

respective owners.

Manufacturer

Wacker Neuson Production Americas LLC

N92W15000 Anthony Avenue

Menomonee Falls, WI 53051 U.S.A.

Tel: (262) 255-0500 · Fax: (262) 255-0550 · Tel: (800) 770-0957

www.wackerneuson.com

Original instructions

This Operator’s Manual presents the original instructions. The original

language of this Operator’s Manual is American English.

wc_tx001370gb_FM10.fm

3

PS 3-Phase Series Foreword

Foreword

SAVE THESE INSTRUCTIONS—This manual contains important instructions for

the machine models below. These instructions have been written expressly by

Wacker Neuson Production Americas LLC and must be followed during installation,

operation, and maintenance of the machines.

Machine

documentation

■ From this point forward in this documentation, Wacker Neuson Production

Americas L

LC will be referred to as Wacker Neuson.

■ Keep a copy of the Operator’s Manual with the machine at all time

s.

■ Use the sep

arate Parts Book supplied with the machine to order replacemen

t

pa

rts.

■ If you are missing any of these documents, please contact Wacker Neuson

to

order a replacement or visit www.wackerneuson.com.

■ Wh

en ordering parts or requesting service information, be prepared to

provide

th

e machine model number, item number, revision number, and serial number.

Expectations

for

information in

this manual

■ This manual provides information and procedures to safely operate and

maintain the above Wacker Neuson model(s). For your own safety and to

re

duce the risk of injury, carefully read, understand, and observe all inst

ructions

d

escribed in this manua

l.

■ W

acker Neuson expressly reserves the right to make technical modifica

tions,

e

ven without notice, which improve the performance or safety standards of it

s

mach

ines.

■ The information contained in this manual is based on machines manufactured

u

p until the time of publication. Wacker Neuson reserves the right to chan

ge any

p

ortion of this information without notice.

■ The illustrations, parts, and procedures in this manual refer to Wa

cker Neuson

fa

ctory-installed components. Your machine may vary depending on th

e

re

quirements of your specific region.

Model Part Number

PS2 1503 0009186, 0008801–0008806

PS3 1503 0009187, 0009188, 0008807–0008812

PS2 2203 0009189, 0009190, 0008813–0008818

PS3 2203 0009191, 0009192, 0008819–0008824

PS2 3703 0009193, 0009194, 0008825–0008830

PS3 3703 0009195, 0009196, 0008831–0008836

PS4 3703 0009197, 0009198, 0008837–0008842

PS3 5503 0009199, 0009200, 0008843–0008848

PS4 5503 0009201, 0009202, 0008849–0008854

PS4 7503HH 0009203, 0009204, 0008855–0008860

PS4 7503HF 0009205, 0009206, 0008861–0008866

PS4 11103HH 0009207, 0009208, 0008867–0008870, 0008876, 0008877

PS4 11103HF 0009209, 0009210, 0008871–0008874, 0008878, 0008879

wc_tx001370gb_FM10.fm

4

Foreword PS 3-Phase Series

Manufacturer’s

approval

This manual contains references to approved parts, attachments, and

modifications. The following definitions apply:

■ Approved parts or attachments are those either manufactured or provided by

Wacker Neuson.

■ Approved modifications are those performed by an authorized Wacker

Neuson service center according to written instructions published by Wacker

Neuson.

■ Unapproved parts, attachments, and modifications are those that do not

meet the approved criteria.

Unapproved parts, attachments, or modifications may have the following

consequences:

■ Serious injury hazards to the operator and persons in the work area

■ Permanent damage to the machine which will not be covered under warranty

Contact your Wacker Neuson dealer immediately if you have questions about

approved or unapproved parts, attachments, or modifications.

2017_CE_PS2_en.fm

EC Declaration of Conformity

Manufacturer

Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,

Menomonee Falls, Wisconsin 53051 USA

Product

Product category

Product function

Item number

PST2 400, PS2 500, PSA2 500, PS2 800, PSA2 800, PS2 1503, PS2 1500,

PS2 1503L, PSA2 1503L, PS2 2203, PS2 2203L, PSA2 2203L, PS2 3703

Water Pump Units

To pump fluid

5000009173, 5000009175, 5000008786, 5000008788, 5000008789,

5000008793, 5000008794, 5000008796, 5000009176, 5000009178,

5000008787, 5000008790, 5000008792, 5000009179, 5000009181,

5000620438, 5000620439, 5000620452, 5000620449, 5000620450,

5000620458, 5000008802, 5000008803, 5000008814, 5000008815,

5000008826, 5000008827, 5000620461, 5000620462, 5000620463,

5000620464, 5000620465, 5000620466

Directives and Standards

We hereby declare that this product meets and complies with the relevant regulations and

requirements of the following directives and standards:

2006/42/EC, 2014/35/EU, 2014/30/EU, (CE-Marking, EN 809, EN ISO 12100, EN 60204-1,

EN 60335-1, EN 60335-2-41, EN 62233, EN 61000-6).

Authorized Person for Technical Documents

Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG,

Wackerstrasse 6, 85084 Reichertshofen, Germany

Menomonee Falls, WI, USA, 14.07.17

Original Declaration of Conformity

Travis Pound

Manager, Product Engineering

For Wacker Neuson

Keith Herr

Vice President and Managing Director

For Wacker Neuson

Jeff Volden

Director, Product Engineering

For Wacker Neuson

2015-CE-PS3-xxxx_en_FM10.fm

EC Declaration of Conformity

Manufacturer

Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,

Menomonee Falls, Wisconsin 53051 USA

Product

Product category

Product function

Item number

PST3 750, PS3 1503, PS3 2203, PS3 3703, PS3 5503

Water Pump Units

To pump fluid

5000620454, 5000620455, 5000620457, 5000009188, 5000008808,

5000008809, 5000009192, 5000008820, 5000008821, 5000008832,

5000008833, 5000009200, 5000008844, 5000008845

Directives and Standards

We hereby declare that this product meets and complies with the relevant regulations and

requirements of the following directives and standards:

2006/42/EC, 2006/95/EC, 2004/108/EC, EN 809, EN ISO 12100, EN 60204-1,

EN 60335-1, EN 60335-2-41, EN 62233, EN 61000-6

Authorized Person for Technical Documents

Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6, 85084

Reichertshofen, Germany

Menomonee Falls, WI, USA

Original Declaration of Conformity

Dan Domanski

Technical Director

For Wacker Neuson

Travis Pound

Manager, Product Engineering

For Wacker Neuson

Keith Herr

Managing Director

For Wacker Neuson

2015-CE-PS4-xxxx_en_FM10.fm

EC Declaration of Conformity

Manufacturer

Wacker Neuson Production Americas LLC, N92W15000 Anthony Avenue,

Menomonee Falls, Wisconsin 53051 USA

Product

Product category

Product function

Item number

PS4 3703, PS4 5503, PS4 7503HH, PS4 7503HF, PS4 11003HH,

PS4 11003HF

Water Pump Units

To pump fluid

5000008838, 5000008839, 5000009202, 5000008850, 5000008851,

5000009204, 5000008856, 5000008857, 5000009206, 5000008862,

5000008863, 5000009208, 5000008876, 5000008868, 5000009210,

5000008878, 5000008872

Directives and Standards

We hereby declare that this product meets and complies with the relevant regulations and

requirements of the following directives and standards:

2006/42/EC, 2006/95/EC, 2004/108/EC, EN 809, EN ISO 12100, EN 60204-1,

EN 60335-1, EN 60335-2-41, EN 62233, EN 61000-6

Authorized Person for Technical Documents

Robert Raethsel, Wacker Neuson Produktion GmbH & Co. KG, Wackerstrasse 6, 85084

Reichertshofen, Germany

Menomonee Falls, WI, USA

Original Declaration of Conformity

Dan Domanski

Technical Director

For Wacker Neuson

Travis Pound

Manager, Product Engineering

For Wacker Neuson

Keith Herr

Managing Director

For Wacker Neuson

Table of Contents

PS 3-Phase Series

wc_bo5000184964_08TOC.fm

11

Foreword 3

EC Declaration of Conformity 5

1 Safety Information 13

1.1 Signal Words Used in this Manual ..................................................... 13

1.2 Machine Description and Intended Use ............................................. 14

1.3 Operating and Electrical Safety .......................................................... 15

1.4 Service Safety .................................................................................... 16

1.5 Labels ................................................................................................. 17

2 Lifting and Transporting 18

3 Installation 19

3.1 Components ....................................................................................... 19

3.2 Preparing the Machine for First Use ................................................... 20

3.3 Application Area ................................................................................. 21

3.4 Preparing for installation ..................................................................... 22

3.5 Checks to Make Before Installation .................................................... 22

3.6 Electrical Wiring .................................................................................. 24

4 Operation 27

4.1 Before Operation ................................................................................ 27

4.2 Trial Operation .................................................................................... 28

4.3 Operating current ............................................................................... 28

4.4 Operating voltage ............................................................................... 29

4.5 Vibration ............................................................................................. 29

4.6 Operation ............................................................................................ 29

4.7 Motor Protector ................................................................................... 30

4.8 Emergency Shutdown Procedure ....................................................... 31

5 Maintenance 32

5.1 Periodic Maintenance Schedule ......................................................... 32

5.2 Maintenance and Inspection .............................................................. 33

5.3 Storage ............................................................................................... 33

5.4 Lubricant Inspection and Changing Procedures ................................ 34

5.5 Replacement Parts ............................................................................. 35

Table of Contents

PS 3-Phase Series

wc_bo5000184964_08TOC.fm

12

5.6 Disassembly and Reassembly ............................................................36

5.7 Graphic (1.5 kW, 2.2 kW, 3.7 kW, 5.5 kW) ..........................................37

5.8 Graphic Components ..........................................................................38

5.9 Disassembly Procedure for 1.5 kW, 2.2 kW, 3.7 kW

and 5.5 kW Models ..............................................................................39

5.10 Graphic (7.5 kW, 11 kW) .....................................................................40

5.11 Graphic Components ..........................................................................41

5.12 Disassembly Procedure for 7.5 kW and 11 kW ...................................42

5.13 Troubleshooting ...................................................................................43

6 Technical Data 44

6.1 Standard Specifications .......................................................................44

6.2 Operating Specifications .....................................................................45

7 AEM Safety Manual 51

wc_si000041gb_FM10.fm

13

PS 3-Phase Series Safety Information

1 Safety Information

1.1 Signal Words Used in this Manual

This manual contains DANGER, WARNING, CAUTION, NOTICE, and NOTE

signal words which must be followed to reduce the possibility of personal injury,

damage to the equipment, or improper service.

NOTICE: Used without the safety alert symbol, NOTICE indicates a situation

which, if not avoided, could result in property damage.

Note: A Note contains additional information important to a procedure.

This is the safety alert symbol. It is used to alert you to potential personal hazards.

► Obey all safety messages that follow this symbol.

DANGER

DANGER indicates a hazardous situation which, if not avoided, will result in death

or serious injury.

► To avoid death or serious injury from this type of hazard, obey all safety

messages that follow this signal word.

WARNING

WARNING indicates a hazardous situation which, if not avoided, could result in

death or serious injury.

► To avoid possible death or serious injury from this type of hazard, obey all safety

messages that follow this signal word.

CAUTION

CAUTION indicates a hazardous situation which, if not avoided, could result in

minor or moderate injury.

► To avoid possible minor or moderate injury from this type of hazard, obey all

safety messages that follow this signal word.

wc_si000041gb_FM10.fm

14

Safety Information PS 3-Phase Series

1.2 Machine Description and Intended Use

This machine is a submersible water pump. The Wacker Neuson Submersible

Pump consists of an electric motor, an impeller, a strainer, and a metal casing with

ports for water suction and discharge. Power is supplied to the pump through a

corded plug or a hard-wired connection, depending on the installation. The

operator connects hoses to the pump and routes them so that water is pumped

from the work area and discharged into an appropriate location.

This machine is intended to be used for general de-watering applications. This

machine is intended for the pumping of clear water, or water containing solids up to

the size stated within the product’s specifications, and up to the flow, head, and

suction lift limits also stated within the product’s specifications.

This machine has been designed and built strictly for the intended use described

above. Using the machine for any other purpose could permanently damage the

machine or seriously injure the operator or other persons in the area. Machine

damage caused by misuse is not covered under warranty.

The following are some examples of misuse:

■ Pumping flammable, explosive, or corrosive fluids

■ Pumping hot or volatile fluids that result in pump cavitation

■ Operating the pump outside of product specifications due to incorrect diameter

hoses, incorrect length hoses, other inlet or outlet restrictions, or excessive

suction lift or head

■ Using the machine as a ladder, support, or work surface

■ Using the machine to carry or transport passengers or equipment

■ Operating the machine outside of factory specifications

■ Operating the machine in a manner inconsistent with all warnings found on the

machine and in the Operator’s Manual.

This machine has been designed and built in accordance with the latest global

safety standards. It has been carefully engineered to eliminate hazards as far as

practicable and to increase operator safety through protective guards and labeling.

However, some risks may remain even after protective measures have been taken.

They are called residual risks. On this machine, they may include exposure to:

■ Electric shock from improper electrical connections or high voltage

■ Personal injury from improper lifting techniques

■ Projectile hazard from discharge

To protect yourself and others, make sure you thoroughly read and understand the

safety information presented in this manual before operating the machine.

wc_si000041gb_FM10.fm

15

PS 3-Phase Series Safety Information

1.3 Operating and Electrical Safety

This pump has not been investigated for use in swimming pool areas.

An acceptable motor-control switch shall be provided at the time of installation

according to local codes and regulations.

Operator

qualifications

Only trained personnel are permitted to start, operate, and shut down the machine.

They also must meet the following qualifications:

■ have received instruction on how to properly use the machine

■ are familiar with required safety devices

The machine must not be accessed or operated by:

■ children

■ people impaired by alcohol or drugs

Personal

Protective

Equipment

(PPE)

Wear the following Personal Protective Equipment (PPE) while operating this

machine:

■ Close-fitting work clothes that do not hinder movement

■ Safety glasses with side shields

■ Hearing protection

■ Safety-toed footwear

WARNING

Electric shock hazard.

► To reduce risk of electric shock, connect only to a properly grounded,

grounding-type receptacle.

► To reduce risk of electric shock, follow instructions in this manual for proper

installation.

CAUTION

Electric shock hazard. This pump may automatically restart.

► Prior to working on the pump or control panel, all supply circuits must be

disconnected.

► Do not remove cord and strain relief.

wc_si000041gb_FM10.fm

16

Safety Information PS 3-Phase Series

1.4 Service Safety

Service

training

Before servicing or maintaining the machine:

■ Read and understand the instructions contained in all manuals delivered with

the machine.

■ Familiarize yourself with the location and proper use of all controls and safety

devices.

■ Only trained personnel shall troubleshoot or repair problems occurring with the

machine.

■ Contact Wacker Neuson for additional training if necessary.

When servicing or maintaining this machine:

■ Do not allow improperly trained people to service or maintain the machine.

Personnel servicing or maintaining the machine must be familiar with the

associated potential risks and hazards.

Personal

Protective

Equipment

(PPE)

Wear the following Personal Protective Equipment (PPE) while servicing or

maintaining this machine:

■ Close-fitting work clothes that do not hinder movement

■ Safety glasses with side shields

■ Hearing protection

■ Safety-toed footwear

In addition, before servicing or maintaining the machine:

■ Tie back long hair.

■ Remove all jewelry (including rings).

Replacing

parts and

labels

■ Replace worn or damaged components.

■ Replace all missing and hard-to-read labels.

■ When replacing electrical components, use components that are identical in

rating and performance to the original components.

■ When replacement parts are required for this machine, use only Wacker

Neuson replacement parts or those parts equivalent to the original in all types of

specifications, such as physical dimensions, type, strength, and material.

wc_si000041gb_FM10.fm

17

PS 3-Phase Series Safety Information

1.5 Labels

A nameplate listing the model number, item number,

revision number, and serial number is attached to each

unit. Please record the information found on this nameplate

so it will be available should the nameplate become lost or

damaged. When ordering parts or requesting service

information, you will always be asked to specify the model

number, item number, revision number, and serial number

of the unit.

CAUTION

Do not attempt to operate this product before reading the

Operator’s Manual and understanding its contents.

Mishandling of this product may result in explosion, fire, or

electrical shock.

■ Do not pull on the power cord or use the power cord to lift

the pump.

■ Always use a dedicated ground leakage circuit breaker.

■ Be sure to install the ground wire securely.

■ Be sure to disconnect the power supply before handling

or inspecting the pump.

Never insert your hand into the pump inlet holes while the

pump is connected to the power supply.

MADE IN TAIWAN

Wacker Neuson Corporation

Menomonee Falls, WI 53051 USA

wc_tx001948gb_FM10.fm

18

Lifting and Transporting PS Pumps

2 Lifting and Transporting

Avoid dropping the pump or other strong impact. Lift the pump by holding it firmly

with the hands or by attaching a rope or chain to the handle.

WARNING

Personal injury hazard. The cable may be damaged, causing electrical leakage,

shock, or fire. If the pump is not lowered into place correctly, it may fall and be

damaged or cause injury.

► Do not under any circumstances install or move the pump by suspending it from

the cable assembly.

► When installing the pump, pay close attention to its center of gravity and weight.

CAUTION

Personal injury hazard. When transporting the pump by hand, be sure to employ

manpower commensurate with the weight of the pump.

► To avoid back injury when lifting the pump, bend the knees to pick it up rather

than bending your back only.

wc_tx001970gb_FM10.fm

19

PS 3-Phase Series Installation

3 Installation

3.1 Components

Note: This diagram shows the parts layout of a typical PS (Three-Phase) model.

The external appearance and the internal construction may vary slightly,

depending on your particular model.

Ref. Description Ref. Description

1 Discharge outlet 8 Lifting handle

2 Coupling 9 Mechanical seal

3 Oil housing 10 Oil plug

4 Lubricant 11 Sleeve

5 Impeller 12 Volute

6 Suction cover 13 Strainer

7 Cable assembly 14 Plate

wc_gr000327

7

1

2

8

9

10

11

12

13

14

6

5

4

3

wc_tx001970gb_FM10.fm

20

Installation PS 3-Phase Series

3.2 Preparing the Machine for First Use

When the pump is delivered, first perform the following inspection checks:

■ While unpacking, inspect the product for damage during shipment, and make

sure all bolts and nuts are tightened properly.

■ Check the model number to make sure it is the product that was ordered. Be

certain it is the correct voltage and frequency.

Note: If there is any problem with the product as shipped, contact your nearest

dealer or Wacker Neuson representative at once.

CAUTION

Personal injury hazard. Failure to observe this caution can lead to electrical shock,

current leakage, fire, water leakage, or other problems.

► Do not operate this product under any conditions other than those for which it is

specified.

Page is loading ...

Wacker Neuson PS23703 User manual

Wacker Neuson PS23703 User manual

Related papers

Other documents