INSTEON USB Wireless Adapter Quick start guide

Brand: INSTEON

Model: USB Wireless Adapter

Type: Quick start guide

2448A7 Rev. 4/24/2013 8:12 AM / See Owner’s Manual for War r anty Infor mation.

Protected under U .S. and for eig n patents (see www .insteon.com)

Quick-Start Guide

INSTEON

USB Stick

Model: 2448A7

Key Features

• Works with INSTEON-compatible home automation software

• Easy and trouble-free USB connection

• Delivers commands to your INSTEON devices via RF

• Stores over 1,000 INSTEON Links in 64KB of non-volatile memory

Note: RF-only devices such as this product require at least one dual-band

INSTEON product for communication to powerline-only devices.

Installing USB Drivers

1) Be sure the USB Stick is not connected to your PC or Mac

2) Go to http://www.ftdichip.com/Drivers/VCP.htm

to download the driver file

• Under the section VCP Drivers, select the correct driver link for your operating system and hardware

3) S ave, extract and then open/run the driver file

• For Mac users, locate the disk image in your Downloads folder and double-click to have the image

mounted. The driver window will open – double-click the correct installer package for your OS

version. Once the installer is done, you’ll need to reboot your Mac.

4) Plug USB Stick into an available port on your PC or Mac

The USB Stick Status LED will turn on solid green (the Status LED will remain on as long as unit is

plugged in)

5) Start your INSTEON-compatible software and follow its instructions to add and use USB Stick

NOTE: USB Stick will communicate with a PC as long as it is connected. This may cause the computer to wake

after entering sleep mode.

Status LED

FCC Compliance Statement

This device complies w ith FCC Rules Part 15.Operation is subject to tw o conditions:

(1) This device may not cause harmful interf erence, and

(2) This device must accept any interference that may be received or that may cause undesired operation. The digital circuitry of this device

has been tested and found to comply w ith the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interf erence in residential installations. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance w ith the instructions, may cause harmf ul interf erence to radio and

television reception. How ever, there is no guarantee that interf erence w ill not occur in a particular installation. If this device does cause such

interference, w hich can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the

follow ing measures:

• Re-orient or re-locate the receiving antenna of the device experiencing the interference.

• Increase the distance betw een this device and the receiver.

• Connect the device to an AC outlet on a circuit different f rom the one that supplies pow er to the receiver.

• Consult the dealer or an experienced radio/TV technician.

WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Tech Support

Visit: http://www.insteon.com/support for complete manual, online tech support and latest product documents.

Call: INSTEON Support Line at 866-243-8022

INSTEON USB Wireless Adapter Quick start guide

INSTEON USB Wireless Adapter Quick start guide

INSTEON USB Wireless Adapter Quick start guide

Related papers