Under Fryer Filters (UFM) - Spacefighter™ Models SF50A and SF65A
TYPICAL APPLICATION
Space saving filter capabilities with the added feature of using the filter module as a portable
filter.
SHORT FORM SPECIFICATION
Provide Pitco UFM (Spacefighter) filter system. Unit shall have an integrated piped filtration
system located underneath the fryer(s). Filter assembly shall utilize envelope type filter paper
with 500 square inches (3,226 cm) of filter area. Filter shall be provided with stainless steel lid
and mounted on casters for easy removal. Filter shall have an automatic heater system to
soften solidified shortening in the filter lines. Filter assembly shall use quick disconnect fittings
for easy removal from fryer. Filter pan shall be a lift-out design for quick removal and thorough
cleaning. Provide accessories as follows:
ELECTRICAL
VOLTS / FREQ / PHASE AMPS / ø VOLTS / FREQ / PHASE AMPS / ø
115 / 60 / 1ø 7.0 240 / 50 / 1ø 3.5
Current rating is for filter ONLY. For fryer electrical
requirements, refer to fryer specification sheets.
PERFORMANCE CHARACTERISTICS
1/3 HP motor pumps 5.6 GPM (21.2 LPM)
OIL CAPACITY
85 pounds (38.6 KG) SF50A
100 pounds (45.4 KG) SF65A
SHIPPING INFORMATION
* 155 pounds (70.3 KG) / 26 cubic feet (0.74 cubic meters) SF50A
* 165 pounds (74.8 KG) / 26 cubic feet (0.74 cubic meters) SF65A
* Shipping information is for the filter unit ONLY. Refer to fryer
specifications for fryer shipping information
NOTE - The illustration shows a filter installed in a
E18-2. This illustration is provided to show location
only. For fryer dimensions and requirements refer
to the fryer specification sheet. Fryer models E7,
E14, E14X, E14B, & E18 can be combined with a
UFM filter module.
DIMENSION
MODEL A B C D
SF50A-E147 24-23/32 24 18 31
(62.80) (61.0) (45.7) (78.7)
SF50A-E14 24-23/32 24 18 31
E14X, E14B (62.80) (61.0) (45.7) (78.7)
SF65A-E18 28-23/32 24 18 35
(73.00) (61.0) (45.7) (88.9)
Pitco Frialator, Inc., P.O. Box 501, Concord, NH 03302-0501 • 509 Route 3A, Bow, NH 03304, USA
(800) 258-3708 • (603) 225-6684 • FAX (603) 225-8472
L10-010 Rev. 04 04/02 Specifications subject to change without notice. Printed in U.S.A