DT Research Carrying Case Basic Operation Guide
- Category
- Tablet cases
- Type
- Basic Operation Guide
BASIC OPERATION GUIDE
ENGLISH
Accessories
Rugged Tablet Carrying Case
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2017, DT Research, Inc. All Rights Reserved.
INTRODUCTION
Thank you for acquiring the Rugged Tablet
Carrying Case designed for portability for
the 10.1
”
and 11.6
”
DT Research tablets.
The tailored design allows the tablet to be used without removing it from the case for ease of use.
With the foldable tabletop stand, the Case can be placed directly on any flat surface to quickly
open-to-use in any locaon. Made of 1680D nylon fabric, the DT Research Rugged Tablet Carrying
Case securely protects the tablet from scratches, bumps, and drops.
Package Contents
One carrying case1.
2. One shoulder strap
Rugged Tablet Carrying Case
Document Pouch
Shoulder Strap Hooks
Side Access Zipper
Name Card Holder
Accessories Pouches
Foldable Tabletop Stand
Rugged Tablet Carrying Case
ENGLISH
2
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2017, DT Research, Inc. All Rights Reserved.
BOG072017 ASSDPENG
Store the Tablet and Detachable Keyboard
Note: Do not unfold the metal stand from the back of the keyboard
Use the Tabletop Stand
Side Access to Ports
Product Care
Read the instrucons carefully. Failure to follow the instrucons could result in damage to the
Carrying Case and voiding its warranty.
1. Only use the Carrying Case in accordance with the operaon guide.
2. Unzip the zippers on the Carrying Case gently.
3. Clean with a cloth with water only. Do not use detergent or other chemicals.
1. Unzip the two zippers to release
the table top stand.
1. Install the tablet directly onto the keyboard docking
port,
making sure to align the port connectors.
2.
Put the tablet and keyboard into the case. Fit the keyboard
’
s
lower part into the cradle, then fix the tablet
’
s two upper
corners with the elasc bands.
2. Pull out the stand, fold, and adjust the stand angles.
1. Unzip the side zipper. 2. Insert the cables (e.g. power,
USB, audio cables) to connect to
the tablet.
-
1
-
2
DT Research Carrying Case Basic Operation Guide
- Category
- Tablet cases
- Type
- Basic Operation Guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI