4
• When using your tablet for the first time, charge the battery fully
(approximately 5 hours).
You are advised to fully charge the battery (
). Charging status is
indicated by the percentage on screen while the tablet is powered off. The
percentage increases as the tablet is charged.
To reduce power consumption and energy waste, when battery is
fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.
Adapter shall be installed near the equipment and shall be easily
accessible
1.2.2 Power on your tablet
Hold down the Power key until the tablet powers on, unlock your tablet
(Slide, PIN, Password, Pattern, Face unlock) if necessary and confirm. The
Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your tablet. Store this
information in a safe place when not in use.
Set up your tablet for the first time
The first time you power on the tablet, you should set the following
options:
• Select the tablet's language, then touch Start.
• Select Mobile data connection you want to use, then touch Next.
• Setup your Google account: If you have a Google Account, touch Set
up now, then enter your user name and password. You can also touch
Skip to get the next step.
• Set Date and Time. You can also choose Automatic time zone, then
touch Finish.
• Touch Skip, then the Setup complete screen will display,
• When the tablet is powered on, you can connect to a Wi-Fi network,
without a SIM card inserted (refer to section "6.1.2 Wi-Fi"), to sign into
your Google account and to use some features.