Glastender BB24-N1-GSN(L) Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Glastender BB24-N1-GSN(L) Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Printed in USA
Specications subject to change without notice. For current specications please visit our website.
Glastender, Inc. 5400 North Michigan Road Saginaw, MI 48604-9780
989.752.4275 800.748.0423 Fax 989.752.4444
www.glastender.com
Approval/Notes:
Project:
Item #: Qty:
Model #:
AIA#
SIS#
Rev. 08-11-09
4.01
24" Back Bar Cooler
One Door Self-Contained
Self-contained
All stainless steel interior construction
CFC free foamed-in-place insulation
Galvanized steel sub-top
Black vinyl-clad steel exterior front and sides
Six foot grounded cord and plug (exits at rear)
Stainless steel die cast handle
Automatic defrost timer
Stainless steel evaporator housing with separate removable
evaporator drain pan
Automatic condensate evaporator
Leg sockets recessed into base
1/2" thick ABS plastic threshold scuff plate
180º swinging doors
Electrical
120V, 1 phase, 60 Hz, 3.6 full load amps
Dedicated 15 amp circuit is required
Includes a 6 foot grounded cord and plug which exits the
bottom rear
Refrigeration
1/6 HP, R134a refrigerant
Plumbing
Automatic condensate evaporator. No drain connection
required
Shelving
Two adjustable coated shelves and one bottom coated rack
included
Capacity
4.6 cases of long neck bottle beer
Legs
1-5/8" diameter
Stainless steel bullet feet
Materials
22 gauge stainless steel parts include: interior floor, walls, ceiling,
front of cabinet, and evaporator housing
22 gauge black vinyl-clad parts include: sides, and standard door
22 gauge galvanized steel parts include: exterior sub-top and back
16 gauge stainless steel parts include: legs
16 gauge galvanized steel parts include: base
16 gauge zinc plated CR steel parts include: leg sockets
12 gauge stainless steel parts include: hinges, hinge brackets, and
lock brackets
Standard Features
Specications
BB24-N1-GSN(L)
BB24-N _-_ _ N(_)
Base Height:
1 = 1"
6 = 6" Legs
Door Style:
B = Black vinyl-clad
U = Unlaminated
L = Laminated
S = Stainless
G = Glass
X = Stainless Glass
Y = Laminated Glass
Door Hinge Location:
L = Left or R = Right
Top Style:
N = No finished top
L = Laminated
S = Stainless
Dimensional Information
5400 North Michigan Road • Saginaw, MI 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
One Door Self-Contained Back Bar Cooler
35"
21"
24"
35"
35"
24"
21"
30 3/4"
COMPRESSOR
COMPARTMENT
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
ADD 1" TO HEIGHT FOR
FACTORY INSTALLED TOP
48"
ADD 1" TO HEIGHT
FOR FACTORY
INSTALLED TOP
SWING WILL
CONTINUE IF
NO CABINET
TO IMPEDE
6"
29 3/4"
21"
DOOR
OPENING
8 1/2"
10"
AIR FLOW
COMPRESSOR
COMPARTMENT
7"
EVAPORATOR
HOUSING
8"
8"
1 1/2"
MINIMUM CLEARANCE FOR AIR FLOW
WARNING:
COMPRESSOR FAILURE DUE TO
RESTRICTION OR BLOCKAGE OF
AIR FLOW WILL VOID WARRANTY.
EVAPORATOR
HOUSING
7 1/8"
24"
4 1/2" 4 1/2"
2 3/8"
22 1/2"
25 1/4"22 3/4"
25 1/4"
FRONT VIEW
PLAN VIEW
STANDARD CABINET
WITH OPTIONAL 6" LEGS
180°
SWING
SIDE VIEWS
180° SWING
/