Quick Start
1
Appearance
2
3
4
1
6
7
5
8
Power button
Press and hold the power button until the indicator lights up, indicating that the Mobile
WiFi Pro2 (Mobile WiFi for short) is turned on.
Press and hold the power button for at least 10 seconds to forcibly power off your Mobile
WiFi.
Press and hold the power button for 15 seconds to restart your Mobile WiFi.
2
Signal indicator
Green: Strong signal.
Yellow: Weak signal.
Red: No signal.
Power supply port
Micro USB port
Lanyard hole
Battery indicator
Four indicators steady on: The remaining battery is 75% to 100%.
Three indicators steady on: The remaining battery is 50% to 75%.
Two indicators steady on: The remaining battery is 25% to 50%.
One indicator steady on: The remaining battery is 10% to 25%.
Fast blinking (twice per second): less than 10% battery remaining.
Slow blinking (once per second): charging.
3
Message indicator
Blue: New message.
Blinking blue: Inbox full.
Reset button
Press and hold to restart your Mobile WiFi and restore it to its factory settings.
If you forget the username, password or SSID for your Mobile WiFi, try restoring the
device to its factory settings.
4
Installation
microSD card (optional)
Micro-SIM card
5
Wi-Fi
®
connection
We strongly recommend that you change the default SSID and Wi-Fi key to keep your data
secure.
SSID:
xxxxxxxxxx
Wi-Fi Key:
xxxxxxxxxx
6
HUAWEI HiLink
Download the HUAWEI HiLink app to manage your Mobile WiFi more easily.
Change the SSID and Wi-Fi network key.
Access data on the microSD card in the Mobile WiFi.
Check data traffic and SMS messages.
Check roaming state and signal strength.
7
You can also manage your Mobile WiFi through the web interface at
http://192.168.8.1. The default username and password is admin.
Click Help in the upper right corner of the screen to learn more about your Mobile
WiFi.
8
Charging other devices
You can charge your phone or Bluetooth headset with the Mobile WiFi using a
charging sling or USB cable.
A charging sling can also be used to connect the Mobile WiFi to a
charger for charging. A computer connected to the Mobile WiFi using a
charging sling cannot access a network.
0%
100%
9
Your Mobile WiFi will not be able to charge other devices when it has
low battery or is overheated.
Some devices cannot be charged when the Mobile WiFi is powered off.
Power on the Mobile WiFi and try again.
Please use the following method to open the charging sling.
2
1
1
10
Sharing data
Data on the Mobile WiFi microSD card can be shared with other devices using the
HUAWEI HiLink app.
Your Mobile WiFi will not be able to share storage when it has low battery or
is overheated.
11
Charging
Please only use compatible chargers provided by a designated manufacturer.
0%
100%
0%
100%
12
Tips
Why isn't my Mobile WiFi responding?
Try restarting the device. If that doesn't work, restore the device to its factory settings.
Why can't I connect to my Mobile WiFi sometimes?
To save power, your Mobile WiFi's Wi-Fi auto off feature is designed to turn off Wi-Fi
when there haven't been connections for a while. You can press the POWER button to
turn on Wi-Fi again. Alternatively, you can disable this feature, although this might
impact battery life. Log in to the HiLink app or web interface and disable the Wi-Fi auto
off feature.
Why won't my Mobile WiFi connect to a network even though all the settings are
correct?
The PIN verification feature might be enabled. Launch HUAWEI HiLink and enter the
correct PIN.
You can disable this feature if you find entering the PIN regularly inconvenient.
From the HiLink app, select Settings and then disable the PIN verification feature.
13
Why can't I access the web interface at 192.168.8.1?
This is likely due to an IP address conflict when the Mobile WiFi assigns itself a new IP
address. Please try 192.168.9.1 in this case.
If your Mobile WiFi has an LCD screen, the new IP address of your web interface will be
displayed.
Why won't my Mobile WiFi power on?
Your battery is probably out of power.
Charge your Mobile WiFi for a while and power it back on.
Why did my Mobile WiFi power off all of a sudden?
Your Mobile WiFi may overheat when you use it continuously over a long period of time,
and thereby trigger its automated protection system. Wi-Fi will be turned off and your
Mobile WiFi will power off if this occurs.
Please ensure the device is properly ventilated and cooled before you power it on again.
31010VWK_01
/
