MS-C78
Micro ATX Motherboard
User’s Manual
Edition 1.2
2017/12/22
MS-C78 User’s Manual
-1-
Copyright
Copyright 2014, all rights reserved. This document is copyrighted and all rights are
reserved. The information in this document is subject to change without prior notice to
make improvements to the products.
This document contains proprietary information and protected by copyright. No part of this
document may be reproduced, copied, or translated in any form or any means without
prior written permission of the manufacturer.
All trademarks and/or registered trademarks contains in this document are property of
their respective owners.
Disclaimer
The company shall not be liable for any incidental or consequential damages resulting
from the performance or use of this product.
The company does not issue a warranty of any kind, express or implied, including without
limitation implied warranties of merchantability or fitness for a particular purpose.
The company has the right to revise the manual or include changes in the specifications
of the product described within it at any time without notice and without obligation to notify
any person of such revision or changes.
Trademark
All trademarks are the property of their respective holders.
Any questions please visit our website at TUhttp://www.commell.com.twUT
MS-C78 User’s Manual
-2-
I/O Shield x 1
(OPLATE-MCDLA)
(1270055)
Packing List:
Please check the package content before you starting using the board.
Hardware:
MS-C78 Micro ATX motherboard x 1
Cable Kit:
SATA Cable x 2
(OALSATA3-L)
(1040529)
Printed Matters:
Driver CD (Including User’s Manual) x 1
DB25 & DB9 cable x 1
(OAL1S1P)
(1040041)
VGA cable x 1
(OALVGAN-S)
(1040568)
MS-C78 User’s Manual
-3-
Index
Chapter 1 <Introduction> .............................................................................. 5
1.1 <Product Overview> ..................................................................................... 5
1.2 <Product Specification> ............................................................................... 6
1.3 <Mechanical Drawing> ................................................................................. 7
1.4 <Block Diagram> .......................................................................................... 8
Chapter 2 <Hardware Setup> ....................................................................... 9
2.1 <Connector Location> .................................................................................. 9
2.2 <Jumper Location & Reference> ................................................................ 10
2.3 <Connector Reference> .............................................................................. 11
2.3.1 <Internal Connectors> .................................................................... 11
2.3.2 <External Connectors> ................................................................... 11
2.4 <CPU and Memory Setup> ........................................................................ 12
2.4.1 <CPU installation> ......................................................................... 12
2.4.2 <Memory Setup> ........................................................................... 13
2.5 <CMOS & ATX Setup> ............................................................................... 14
2.6 <Serial ATA Interface> ................................................................................ 15
2.7 <Ethernet Interface> .................................................................................. 16
2.8 <Onboard Display Interface> ..................................................................... 17
2.8.1 <Analog Display> .......................................................................... 17
2.8.2 <Digital Display> ............................................................................ 18
2.8.3 <VGA Interface> ............................................................................ 22
2.9 <Integrated Audio Interface> ...................................................................... 23
2.10 <USB Interface> ....................................................................................... 24
2.11 <Serial Port> ............................................................................................ 26
2.12 <mSATA Interface> .................................................................................. 29
2.13 <GPIO and SMBus Interface>.................................................................. 30
2.14 <Power Supply and Fan Interface > ......................................................... 31
2.14.1 <Power Input> ............................................................................. 31
2.14.2 <Fan connector>.......................................................................... 32
44-pin
MS-C78 User’s Manual
-4-
2.15 <Switch and Indicator> ............................................................................. 33
Chapter 3 <System Setup> ......................................................................... 34
3.1 <Audio Configuration> ............................................................................... 34
3.2 <Display Properties Setting> ...................................................................... 35
3.3 <SATA configuration> ................................................................................. 37
3.4 <SATA RAID Configuration> ...................................................................... 38
Chapter 4 <BIOS Setup> ............................................................................. 40
Appendix A <I/O Port Pin Assignment> .................................................... 41
A.1 <Serial ATA Port> ....................................................................................... 41
A.2 <IrDA Port> ................................................................................................ 41
A.3 <LAN Port> ................................................................................................ 41
A.4 <Parallel Port> ........................................................................................... 42
Appendix B <Flash BIOS> .......................................................................... 43
<Flash BIOS Procedure> ................................................................................. 43
Appendix C <Programming GPIO’s> ......................................................... 44
Appendix D <Programming Watchdog Timer > ........................................ 44
Contact Information .................................................................................... 46
MS-C78 User’s Manual
-5-
Chapter 1 <Introduction>
1.1 <Product Overview>
MS-C78 the 4
th
Generation Intel of the Micro ATX motherboard, supports 4
th
Generation
Intel® Core™ i7, Core™ i5, Core™ i3, Celeron, Pentium Desktop Processor and features
Intel Q87 chipset, integrated HD Graphics, DDR3 memory, REALTEK High Definition
Audio, Serial ATAIII with RAID function for a system and Intel Gigabit LAN.
Intel Haswell Processor
The 4
th
Generation Intel® Core™ processor family desktop is the next generation of
64-bit, the processors are based on Intel® microarchitecture formerly known as Haswell,
manufactured on 22nm process technology with 3-D tri-gate transistors.
Features for Intel Q87 chipset
The board integrates Intel Q87 chipset, supports integrated HD Graphics, built-in high
speed mass storage interface of Serial ATAIII interface with RAID function, High Definition
Audio with 2 channels surrounding sound.
Flexible Extension Interface
The board provides, mSATA socket, Mini-PCI socket, one PCIEx16 slot and one PCIEx4
slot, and two PCI slot.
MS-C78 User’s Manual
-6-
1.2 <Product Specification>
General Specification
Form Factor
Micro ATX motherboard
CPU
Supports 4th Generation Intel® Core™ i7/ i5/ i3/ Celeron/ Pentium Desktop
Processor.
Package type: FCLGA1150
Memory
Four DDR3/DDR3L (support 1.5V) 1333/1600 DIMM up to 32GB
Support Non-ECC, unbuffered memory only
Chipset
Intel Q87 Express chipset
Real Time Clock
Chipset integrated RTC with onboard lithium battery
Watchdog Timer
Generates a system reset with internal timer for 1min/s ~255min/s
Power Management
Supports ACPI 4.0 compliant
Serial ATA Interface
Intel® Q87 PCH built-in 4 x Serial ATAIII interface up to 600MB/s Support
RAID 0, 1, 5, 10 and Intel Rapid Storage Technology.
(not support SATA II device)
VGA Interface
Intel® Clear Video integrated HD Graphics Technology
DVI Interface
Onboard DVI connector
LVDS Interface
Onboard 24-bit dual channel LVDS connector with +3.3V/+5V/+12V supply
Display port Interface
Onboard DisplayPort connector
Audio Interface
Intel® integrated Q87 with Realtek ALC888 HD Audio.
LAN Interface
1 x Intel® I210 Gigabit LAN
1 x Intel® I217-LM Gigabit LAN
GPIO interface
Onboard programmable 8-bit Digital I/O interface
Extended Interface
One PCIE X 16 slot & one PCIE X 4 slot, One mSATA, One Mini PCI, Two
PCI slot.
(mSATA only Support SATAIII)
Internal I/O Port
4 x RS232, 1 x GPIO port, 1 x Front panel Audio, 1 x IrDA connector,
1 x CRT, 1 x SMBus connector, 1 x LVDS, 1 x LPC, 1 x LPT, 6 x USB2.0 and
2 x USB3.0 ports, 4 x SATAIII
External I/O Port
1 x PS/2 Keyboard/Mouse Port, 1 x RS232, 1 x RS232/422/485, 1 x DVI port,
1 x DisplayPort, 2 x RJ45 LAN ports, 4 x USB3.0 ports and
1 x 2 Channel Audio.
Power Requirement
Standard ATX 24-pin (20-pin is compatible) power supply and P4 4-pin 12V
Dimension
244mm x 244mm
Temperature
Operating within 0~60 centigrade
Storage within –20~85 centigrade
Ordering Code
MS-C78
Onboard DVI, DisplayPort, CRT, LVDS, 2 x Gigabit LAN, USB3.0 & 2.0,
Serial Port, SATAIII, IrDA, Realtek HD Audio, Mini PCI, PCIE x16 & x4, PCI,
SMBus, GPIO, LPC, LPT, mSATA.
The specifications may be different as the actual production.
For further product information please visit the website at TUhttp://www.commell.com.twUT
MS-C78 User’s Manual
-7-
1.3 <Mechanical Drawing>
MS-C78 User’s Manual
-8-
1.4 <Block Diagram>
Q87
W25Q128 SPI
1 x Intel I210
1 x Intel I217-LM
1 x RS232/422/485
1 x RS232 & GPIO & IrDA
& LPC & LPT
1 x PS/2
4
th
Generation Intel® Core™ i7,
Core™ i5, Core™ i3, Celeron,
Pentium Processor
1 x PCI Express x16
4 x 240-pin DDR3
LO-DIMM
1333/1600 MHz
up to 32GB
W83627DHG-P
1 x LVDS
4 x Serial ATAIII
6 x USB 3.0
6 x USB 2.0
1 x mSATA
1 x DVI
1 x CRT
4 x RS232
ALC888 HD Audio
F81216
D
1 x DisplayPort
TSI383
2 x PCI
1 x PCI Express x4
1 x Mini PCI
MS-C78 User’s Manual
-9-
Chapter 2 <Hardware Setup>
2.1 <Connector Location>
PS2
USB_RJ45_1/2 Audio
DVI
DisplayPort
COM1+COM2
mSATA
CN_DIO
CPUFAN
CN_12V
CN_INV
CN_LPC
CN_AUDIO
CN_COM3
CN_CRT
CN_LVDS
CN_IR
CN_SMBUS
CN_USB3-1
JFRNT
SYSFAN
DDRIII_A2
ATX
S_ATA3
CN_USB2-3/2/1
CN_COM4
CN_COM5
CN_COM6
PCI 3
PCIE_16X
PCIE_4X
PCI 1
CN_LPT
DDRIII_B1
DDRIII_B2
DDRIII_A1
S_ATA2
S_ATA1
S_ATA4
Mini PCI
MS-C78 User’s Manual
-10-
2.2 <Jumper Location & Reference>
Jumper
Function
JRTC
CMOS Operating/Clear Setting
JVLCD
Panel Voltage Setting
JAT
Power mode select
JP1
Com1 Voltage Setting (For Pin 9)
JP2
Com2 Voltage Setting (For Pin 9)
JCSEL1
JCSEL2
COM2 RS-232 RS422 RS485 Setting
CN_IR IrDA Setting
JVUSB
USB Voltage Setting
JVLCD
JRTC
JAT
JP1
JP2
JVUSB
JCSEL1
JCSEL2
MS-C78 User’s Manual
-11-
2.3 <Connector Reference>
2.3.1 <Internal Connectors>
Connector
Function
Remark
CPU
LGA1150 CPU Socket
DDRIII A-1/2 &
B-1/2
240 -pin DDR3 LO-DIMM socket
SATAIII 1/2/3/4
7-pin Serial ATAIII connector
DC_12V
4-pin +12V additional power supply connector
ATX
24-pin power supply connector
CN_AUDIO
5 x 2-pin audio connector
CN_DIO
6 x 2-pin digital I/O connector
CN_USB2-1/2/3
10-pin USB connector
CN_USB3
20-pin USB3.0 connector
CPUFAN
4-pin CPU cooler fan connector
SYSFAN
3-pin system cooler fan connector
CN_CRT
16-pin VGA connector
CN_LVDS
20 x 2-pin LVDS connector
CN_INV
5-pin LCD inverter connector
CN_IR
5-pin IrDA connector
CN_COM
3/4/5/6
9-pin RS232
CN_LPC
5 x 2-pin LPC connector
CN_LPT
13 x 2-pin printer connector
JFRNT
14-pin front panel switch/indicator connector
PCIE_16X
164-pin x16 PCIE slot
PCIE_4X
64-pin x4 PCIE slot
PCI
120-pin PCI slot
mSATA
2 x 52-pin Mini-PCIe socket
Mini PCI
124-pin Mini PCI slot
JAT
Power mode select
2.3.2 <External Connectors>
Connector
Function
Remark
USB_RJ45 1/2
2 x USB3.0 and 1 x RJ45 LAN connector
DVI + DisplayPort
DVI connect and DisplayPort connector
COM 1/2
Serial port connector
PS/2
PS/2 keyboard and mouse connector
AUDIO
Audio connector
MS-C78 User’s Manual
-12-
2.4 <CPU and Memory Setup>
2.4.1 <CPU installation>
MS-C78 has a LGA1150 CPU socket onboard; please check following steps to install the
processor properly.
Attention If MS-C78 needs RMA please Keep CPU socket cover on the CPU Socket.
Warning If CPU Socket internal Pin damage We could not provide warranty.
Notice: Please place the CPU on the pins tenderly to avoid bending the pins
Intel® I3/I5/I7/Celeron/Pentium processor Package
type: 1150 pin FCLGA
FSB:1333/1600MHz
1. Lift this bar
2. Uncover this plate
4. Lock this bar
3. Place the CPU on the top of
the pins
Checked point
5. Cover this plate
MS-C78 User’s Manual
-13-
2.4.2 <Memory Setup>
MS-C78 has four 240-pin DDR3/DDR3L DIMM support up to 32GB of memory capacity
and 1.5 Voltage. The memory frequency supports 1333/1600 MHz. Only Non-ECC
memory is supported.
DDRIII_A1
DDRIII_B2
DIMM2
Please check the pin number to match the socket side well
before installing memory module.
DDRIII_B1
DDRIII_A2
MS-C78 User’s Manual
-14-
2.5 <CMOS & ATX Setup>
The board‟s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC
Mode
1-2
Clear CMOS
2-3
Normal Operation
Default setting: 2-3
Jumper: JAT
Type: onboard 3-pin jumper
JAT
Mode
1-2
AT Mode
2-3
ATX Mode
Default setting:2-3
JRTC
JAT
1
3
1
3
MS-C78 User’s Manual
-15-
2.6 <Serial ATA Interface>
MS-C78 has Four Serial ATA III interfaces with RAID function, the transfer rate of the
Serial ATA III can be up to 600MB/s, but not supports SATAII device. Based on Intel®
PCH, it supports Intel® Rapid Storage Technology with combination of RAID 0,1,5 and
10. The main features of RAID on Intel® Q87 PCH are listed below:
1. Supports for up to RAID volumes on a single, two-hard drive RAID array.
2. Supports for two, two-hard drive RAID arrays on any of six Serial ATA ports.
3. Supports for Serial ATA ATAPI devices.
4. Supports for RAID spares and automatic rebuild.
5. Supports on RAID arrays, including NCQ and native hot plug.
For more information please visit Intel’s official website.
For more about the system setup for Serial ATA, please check the chapter of SATA
configuration.
SATA3-1
SATA3-2
SATA3-4
SATA3-3
MS-C78 User’s Manual
-16-
2.7 <Ethernet Interface>
The board integrates with one Intel I210 Gigabit Ethernet & one Intel I217-LM controllers,
as the PCI Express bus. The Intel I210 & I217-LM supports triple speed of
10/100/1000Base-T, with IEEE802.3 compliance and Wake-On-LAN supported.
Onboard Intel® I217-LM GbE controller support Intel® AMT 9.0 feature on primary LAN
port. The BIOS is ready to support Intel® AMT 9.0 feature. The necessary prerequisite is
your CPU must support Intel® vPro technology, ex : Intel® Core™ i7
For further instruction about the Intel® AMT features and set up, please refer to the iAMT
Setting.pdf.
RJ45 LAN connector
I210
I217-LM
MS-C78 User’s Manual
-17-
2.8 <Onboard Display Interface>
Based on Intel Q87 chipset with built-in HD Graphic, the board provides one DVI
connector & one DisplayPort on real external I/O port, one 40-pin LVDS interface with
5-pin LCD backlight inverter connector and provides 16-pin VGA interface.
The board provides dual display function with clone mode and extended desktop mode
for DVI, DisplayPort, VGA and LVDS.
2.8.1 <Analog Display>
Please connect your DVI & DisplayPort or LCD monitor with male connector to the
onboard female connector on rear I/O port .
DVI
DisplayPort
MS-C78 User’s Manual
-18-
2.8.2 <Digital Display>
The board provides one 40-pin LVDS connector for 24-bit single/dual channel panels,
supports up to 1920 x 1200 (UXGA) resolution, with one LCD backlight inverter
connector and one jumper for panel voltage setting.
Effective patterns of connection: 1-2 / 3-4 / 5-6
Warning: others cause damages
JVLCD
6 2
5 1
5
1
2
39
40
1
1
2
3
4
5
6
CN_INV
CN_LVDS
MS-C78 User’s Manual
-19-
Connector: CN_INV Connector: JVLCD
Type: 5-pin LVDS Power Header Type: 6-pin Power select Header
Pin
Description
1
+12V
2
Reserved (Note)
3
GND
4
GND
5
ENABKL
Note:
Reserved for MB internal test
Please treat it as NC.
Connector: CN_LVDS
Type: onboard 40-pin connector for LVDS connector
Connector model: HIROSE DF13-40DP-1.25V
Pin
Signal
Pin
Signal
2
LCDVCC
1
LCDVCC
4
GND
3
GND
6
ATX0-
5
BTX0-
8
ATX0+
7
BTX0+
10
GND
9
GND
12
ATX1-
11
BTX1-
14
ATX1+
13
BTX1+
16
GND
15
GND
18
ATX2-
17
BTX2-
20
ATX2+
19
BTX2+
22
GND
21
GND
24
ACLK-
23
BTX3-
26
ACLK+
25
BTX3+
28
GND
27
GND
30
ATX3-
29
BCLK-
32
ATX3+
31
BCLK+
34
GND
33
GND
36
LVDS_ SCL
35
N/C
38
LVDS_ DAT
37
N/C
40
N/C
39
N/C
Pin
Description
1-2
LCDVCC (3.3V)
3-4
LCDVCC (5V)
5-6
LCDVCC (12V)
Default: 1-2
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
