LG GS74SGS User manual

OWNER’S MANUAL

SIDE BY SIDE

REFRIGERATOR

Please read this owner’s manual thoroughly before

operating and keep it handy for reference at all times.

Model Name(*=color)

LSXS26326*

LSXS26366*

LSXS26466*

LSXS26386*

P/No. MFL67653437-12

www.lg.com

ENGLISH

G LSXS26336*S73SGS

G

GS73SDD

GS73SGG

S74SDS

GS73SDS

GS74SGS

LSXC22386*

LSXC22326*

LSXC22336*

2 TABLE OF CONTENTS

ENGLISH

3 PRODUCT FEATURES

4 IMPORTANT SAFETY

INSTRUCTIONS

7 COMPONENTS

7 Refrigerator Exterior

8 Refrigerator Interior

10 INSTALLATION

10 Installation Overview

10 Speciﬁcations

11 Unpacking Your Refrigerator

11 Choosing the Proper Location

11 - Flooring

12 - Ambient Temperature

12 - Measuring the Clearances

12 Removing/Assembling the Refrigerator

Door Handles

13 Removing/Assembling the Refrigerator

Doors

13 - Removing the Left (Freezer) Door

13 - Removing the Right (Refrigerator) Door

14 - Reinstalling the Right (Refrigerator) Door

14 - Reinstalling the Left (Freezer) Door

15 Connecting the Water Line

15 - Before You Begin

15 - Water Pressure

15 - What You Will Need

17 - Water Line Installation Instructions

18 Turning On the Power

19 Leveling

19 Door Alignment

20 HOW TO USE

20 Before Use

21 Control Panel

21 - Airﬂow

22 - Control Panel Features

24 Automatic Icemaker

24 - When You Should Turn the Icemaker O

24 - Normal Sounds You May Hear

24 - Preparing for Vacation

24 - Power Failure

26 Ice and Water Dispenser

27 Storing Food

27 - Food Preservation Location

29 - Food Storage Tips

29 - Storing Frozen Food

30 Detaching and Assembling the Storage Bins

32 Door-In-Door

33 Adjusting the Refrigerator Shelves

34 MAINTENANCE

34 Cleaning

35 Replacing the Water Filter

39 SMART DIAGNOSIS

TM

39 Using Smart Diagnosis

TM

40 TROUBLESHOOTING

40 Common Product Questions

41 Noises You Might Hear

42 Before Calling for Service

51 WARRANTY (USA)

53 WARRANTY (CANADA)

TABLE OF CONTENTS

3PRODUCT FEATURES

ENGLISH

PRODUCT FEATURES

* Depending on the model, some of the following functions may not be available.

DOOR-IN-DOOR REFRESHMENT CENTER

The Door-in-Door Refreshment Center provides a convenient area for

frequently-used items that require easy access.

FRESH ZONE DRAWERS

The Fresh Zone drawers are designed to help keep your fruits and

vegetables fresh.

DOOR ALARM

The Door Alarm function is designed to prevent refrigerator malfunctioning

that could occur if a refrigerator door remains open. If a refrigerator door

is left open for more than 60 seconds, a warning alarm SOUNDSAT

30 second intervals.

AUTO CLOSING HINGE

The refrigerator doors close automatically with a slight push. (The door

only closes automatically when it is open at an angle less than 30°.)

ICE PLUS

Ice production can be increased by approximately 20 percent when the

freezer section is maintained at the coldest temperature for a 24-hour pe-

riod.

4 IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

This guide contains many important safety messages. Always read and obey all safety messages.

WARNING You can be killed or seriously injured if you do not follow instructions.

CAUTION Indicates an imminently hazardous situation which, if not avoided, may result in

minor or moderate injury, or product damage.

WARNING

To reduce the risk of re, electric shock, or personal injury when using your product,

basic safety precautions should be followed, including the following:

This is the safety alert symbol. It alerts you to safety messages that inform you of hazards

that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard

signal word WARNING or CAUTION. These words mean:

Power

NEVER unplug your refrigerator by pulling

on the power cord. Always grip the plug

and pull it straight out from the

outlet.

Immediately call a technician to repair or

replace all power cords that have become

frayed or otherwise damaged. Do not use

a cord that shows cracks or abrasion

damage along its length or at either the

plug or connector end.

ower outlet.

Unplug the power plug immediately in the

event of a blackout or thunderstorm.

Plug in the power plug with the power

cord facing downward.

Installation

Contact an authorized service center when

you install or relocate the refrigerator.

When moving your refrigerator away from

the wall, be careful not to roll over or

damage the power cord.

Do not install the refrigerator where there

may be a danger of the unit falling.

Use

DO NOT allow children to climb, stand,

or hang on the refrigerator doors or on

the shelves in the refrigerator. They could

damage the refrigerator and seriously

injure themselves.

Do not hang on to or place heavy objects

on the refrigerator’s dispenser.

Do not place heavy or dangerous objects

(bottles with liquid) on the refrigerator.

Do not put live animals inside the

refrigerator.

Do not allow children to climb into the

product when it is in use.

In the event of a gas leak (propane/

LPG), ensure adequate ventilation and

contact an authorized service center

before resuming use. Do not touch or

disassemble the electrical outlet of the

refrigerator.

In the event of a refrigerant leak, move

objects away from the

refrigerator. Ensure adequate ventilation

and contact an authorized service center.

Do not use or place substances

(chemicals, medicine, cosmetics, etc) near

the refrigerator or store them inside the

refrigerator. Do not place the refrigerator

in the vicinit

Do not ov or pack items too tightly into

door bins. Doing so may cause damage

to the bin or personal injury if items are

removed with excessive force.

Your refrigerator must always be plugged

to its own outlet which is adequately

grounded. The energy current should only

be 115 V ~ 60 Hz, 127 V ~ 60 Hz or 220 V~

50/60 Hz, AC (according to the National

rating type). with a 15 A fuse for voltages

between 115 and 127 V or 10 A to 220 V

independent voltage protection system

from the main supply of your home. (The

electrical installation must be

by a

Do not plug appliance into a damaged wall

outlet.

If the appliance is submerged or partially

appliance immediately from the main circuit

breakers. Contact the nearest service center

5IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

This product is not to be used for special

purposes such as the storage of medicine

or test materials or for use on ships, etc.

Unplug the power plug before cleaning or

repairing the refrigerator.

When a technician replaces the LED lamp

in the refrigerator, unplug the refrigerator or

turn o

ower.

Do not modify or extend the power cord.

Do not use a dryer to dry the interior. Do

not light a candle to remove interior odors.

Do not use an outlet that can be turned

o

with a switch. Do not use an extension

cord. It is the user’s responsibility to

replace a standard 2-prong wall outlet

with a standard 3-prong wall outlet.

Do not, under any circumstances, cut or

remove the third (ground) prong from the

pow

of your country.).

Do not use an adapter plug and plug the

power plug into a multi-outlet extension

cord.

Disconnect the power cord immediately if

you hear a noise, smell a strange odor or

detect smoke coming from the appliance.

Turn the power o if water or dust

penetrates into the refrigerator. Call a

service agent.

Do not disassemble or modify the

refrigerator.

Do not put hands, feet, or metal objects

below or behind the refrigerator.

Do not operate the refrigerator or touch

the power cord with wet hands.

In refrigerators with automatic icemakers,

avoid contact with the moving parts

of the ejector mechanism or with the

heating element that releases the cubes.

Do not place

or hands on the

automatic ice-making mechanism while

the refrigerator is plugged in.

When dispensing ice from the dispenser,

do not use crystal ceramics.

Do not touch the cold surfaces in the

freezer compartment with wet or damp

hands, when your refrigerator is in

operation.

Do not put glass containers, glass bottles

or soda in the freezer.

This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities,

or lack of experience and knowledge,

unless they have been given supervision

or instruction concerning the use of the

appliance by a person responsible for their

safety.

Do not refreeze frozen food that has

thawed completely. Doing so may result

in a serious health issue.

If you are throwing away y our old

refrigerator, make sure the CFC or HCFC

coolant is removed for proper disposal

by a

servicer. If you release

CFC/HCFC coolant, you may be

or

imprisoned in accordance with the relevant

environmental law.

Junked or abandoned refrigerators are

dangerous, even if they are sitting for

only a few days. When disposing of the

refrigerator, remove the packing materials

from the door or take o

the doors but

leave the shelves in place so that children

may not easily climb inside.

If the refrigerator is connected to a circuit

protected b

y fuses, use time delay fuses.

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the risk of re, electric shock, or personal injury when using your product, basic

safety precautions should be followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS

Children should be supervised to ensure

they do not use the device as a toy

We do not recommend the use of exten-

sion cables. However, if you still choose

to utilize an extension cable, it is

absolutely necessary that it is listed in the

UL (in the United States) or CSA (in

Canada), that it supports three-pronged

plugs and that the electrical current

support a 15 A fuse for voltages between

115 and 127 V or 10 A to 220 V. (Verify the

6 IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

CAUTION

Installation

The refrigerator must be properly

installed in accordance with the Installer

Instructions that were taped to the front

of the refrigerator.

Be careful when you unpack and install

the refrigerator. Immediately dispose of

plastic and other packing materials out of

the reach of children.

The appliance must be positioned for

easy access to a power source.

Use

Close the door carefully when children

are around.

K ch point areas;

clearances between the doors and cabi-

nets are necessarily small. Be careful

closing doors when children are nearby.

If you store food improperly, be aware

that it may fall and cause injury.

Do not use aerosols near the refrigera-

tor.

Do not store articles on the top of the

appliance.

Maintenance

Do not use strong detergents like wax or

thinners for cleaning. Clean with a soft

cloth.

Wipe foreign objects (such as dust and

water) o

the prongs of the power plug

and contact areas regularly.

Do not store, disassemble or repair the

refrigerator by yourself.

Remove any dust or foreign matter from

the power plug pins.

Do not use a wet or damp cloth when

cleaning the plug.

If the refrigerator is disconnected from

the power supply, wait f

ve

minutes before plugging it back in.

If you notice a chemical or burning

plastic smell or see smoke, unplug the

refrigerator immediately and contact

your LG Electronics Service Center.

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the r re, electric shock, or personal injury when using your product, basic

safety precautions should be followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT : Use only new water hose-sets,

do not reuse old water hose -sets

Caution: This device is meant to be used

in applications domestic and the like, such

and other environments I work; cottages

and customers in hotels, motels and other

environments residential; environments

bed and breakfast rate; hospitality non-

commercial and similar applications.

NOTE

Before a technician installs, cleans or changes

lights, unplug the refrigerator.

and reset the control (of thermostat,

refrigerator or freezer, depending on your

model) to the desired position.

Do not use extension cords or ungrounded

(two prong) adapters.

If the appliance's power cord is damaged,

the cord must be replaced by the manu-

facturer or its service agent or a similarly

hazard. Do not operate the appliance

with a damaged power cord.

Do not store explosive substances such as

in this appliance.

The insulation in this unit contains

cyclopentane or a pentane like blowing

and requires a special elimination

process. Before discontinuing use of this

refrigerator, contact local authorities to

arrange forsafe disposal of the unit.

Refrigerator compartment’s lamps are

interior lighting LED type, so maintenance

7COMPONENTS

ENGLISH

COMPONENTS

Use this page to become more familiar with the parts and features of your refrigerator.

*T

tual product may di er depending on the model.

Refrigerator Exterior for Door-In-Door Models

Refrigera

Vertical Horizontal

tor Exterior for Standard Model

Door-in-Door

Refrigerator

Preserves food.

Freezer

Preserves frozen food.

Control Panel

Sets the refrigerator and

freezer temperatures, the

w

dispenser mode.

Filtered Water

and Ice Dispenser

water and ice.

Refrigerator

Preserves food.

Freezer

Preserves frozen food.

Control Panel

Sets the refrigerator and

freezer temperatures, the

w

dispenser mode.

Filtered Water

and Ice Dispenser

water and ice.

8 COMPONENTS

ENGLISH

Refrigerator Interior for Door-In-Door Models

Automatic

Icemaker

Shelf

LED Lamp

Door Bin

Freezing Zone

Door Bin

Shelf

Refreshment center

Filter

LED Lamp

Dairy Corner

Door Bin

Fresh zone

Freezer

Compartment

Refrigerator

Compartment

NOTE

Parts, features and options vary by model.

Your model may not include every option.

9COMPONENTS

ENGLISH

Freezer

Compartment

Refrigerator

Compartment

Automatic

Icemaker

Shelf

LED Lamp

Door Bin

Freezing Zone

Door Bin

Shelf

LED Lamp

Filter

Dairy Corner

Door Bin

Fresh zone

Freezer

Compartment

Refrigerator

Compartment

Automatic

Icemaker

Shelf

LED Lamp

Freezing Zone

Door Bin

Shelf

LED Lamp

Filter

Dairy Corner

Door Bin

Fresh zone

NOTE

Parts, features and options vary by model.

Your model may not include every option.

Refrigerator Interior for Standard Model

Horizontal Display

Vertical Display

10 INSTALLATION

ENGLISH

INSTALLATION

Installation Overview

Please read the following installation instr fter purchasing this product or transporting it

to another location.

2 Choosing the proper

location

3 Disassembling/Assembling

4 Connecting the water

supply and water line

5 Leveling and Door

Alignment

Speciﬁcations

Side by Side refrigerator model

Description Side by Side refrigerator

Electrical requirements

Min. / Max. Water pressure

20 - 120 psi (138 - 827 kP

Dimensions for Standard Depth Models 35.8 " (W) X 36.3" (D) X 70.3" (H), 51.1 " (D w/ door open)

909 mm (W) X 922 mm (D) X 1785 mm (H), 1298 mm (D w/ door open)

Net weight for Standard Depth Models

1 Unpacking your

refrigerator and remove

vinyl if applicable

Connect to potable water

supply only.

WARNING

DID Model: 304.3 lb (138 kg)

Basic Model Vertical: 277.8 lb (126 kg)

Basic Model Horizontal: 264.6 lb (120 kg)

The appearance and sp constant product improvements.

115 V ~ 60 Hz and fused at 15 A

127 V ~ 60 Hz and fused at 15 A

220 V~ 50/60 Hz and fused at 10 A

(Refer to rating label inside refrigerator compartment).

35.9" (W) X 31.8" (D) X 70.3" (H), 46.5" (D w/ door open)

912 mm (W) X 807 mm (D) X 1785 mm (H), 1180 mm (D w/ door open)

DID Model: 277.8 lb (126 kg)

Non DID Model: 251.4 lb (114 kg)

After Door Removal: 29.1" (739 mm) (D)

After Door Removal: 24.6" (624 mm) (D)

Dimensions for Counter Depth Models

Net weight for Counter Depth Models

LSXS26****, GS7****

LSXC22****

Net weight for Counter Depth Models

LSXC22336*

Non DID Model: 280 lb (127 kg)

11INSTALLATION

ENGLISH

Unpacking Your Refrigerator

Remove tape and any temporary labels from

Please remove vinyl from doors before

connecting unit to the electrical supply

(on some models).

your refrigerator before using. Do not remove

any warning-type labels, the model and serial

number label

To remove any remaining tape or glue, rub

the area briskly with your thumb. Tape or glue

residue can also be easily removed by rubbing

a small amount of liquid dish soap over the

adhesive with y

Wipe with warm

water and dry.

Do not use sharp instruments, rubbing alcohol,

ve cleaners to re-

move tape or glue. These products can damage

the surface of your refrigerator.

Refrigerator shelves are installed in the ship-

ping position. Please reinstall shelves according

to your individual storage needs.

Choosing the Proper Location

Select a place where a water supply can

be easily connected for the automatic

icemaker.

Flooring

To avoid noise and vibration, the unit must be

leveled and installed on a solidly constructed

r. If required, adjust the leveling legs to

compensate for unev

r. The

front should be slightly higher than the rear to

aid in door closing. Leveling legs can be turned

easily by tipping the cabinet slightly. Turn the

leveling legs to the left to raise the unit or to

the right to lower it. (See Leveling and Door

Alignment.)

NOTE

Installing on carpeting, soft tile surfaces, a

platform or weakly supported structure is

not recommended.

WARNING

To reduce the risk of electric shock, do not

install the refrigerator in a wet or damp area.

WARNING

Use two or more people to move and

install the refrigerator. Failure to do so

can result in back or other injury.

Your refrigerator is heavy. When moving

the refrigerator for cleaning or service,

be sure to protect the

r. Always pull

the refrigerator straight out when mov-

ing it. Do not wiggle or walk the refrig-

erator when trying to move it, as

damage could occur.

Keep materials and va-

pors, such as gasoline, away from the

refrigerator. Failure to do so can result

explosion, or death.

The water pressure must be between 20

and 120 psi (138 and 827 kPa) on models

without a water

ter and between 40 and

120 psi (276 and 827 kPa) on models with a

water

lter.

The refrigerator should always be plugged

into its own individual properly grounded

electrical outlet.

This provides the best performance and

also prevents overloading house wiring

from overheated wires. It is recommended

that a separate circuit serving only this

appliance be provided.

12 INSTALLATION

ENGLISH

Ambient Temperature

Install this appliance in an area where the

temperature is between 55°F (13°C) and 110°F

(43°C). If the temperature around the appli-

ance is too low or high, cooling ability may be

adversely aected.

Measuring the Clearances

Too small of a distance from adjacent items

may result in lowered freezing capability and

increased electricity consumption charges.

Allow at least 24 inches (61 cm) in front of the

refrigerator to open the doors, and at least

2 inches (5.08 cm)

Removing/Assembling the

Refrigerator Door Handles

Removing the Handles

1

Loosen the set screws with a 3/32 in. Allen

wrench and remove the handle.

2 Loosen the mounting fasteners that connect

to the refrigerator door and handle using a

¼ in. Allen wrench, remove the mounting

fasteners.

Assembling the Handles

1

Assemble the mounting fasteners at both

ends of the handle using a ¼ in. Allen

wrench.

2 Place the handle on the door by tting

the handle footprints over the mounting

fasteners and tightening the set screws

with a 3/32 in. Allen wrench.

NOTE

When it is necessary to move the refrigerator

through a narrow opening, removing the

doors is the recommended procedure. If it

is necessary to remove the handles, follow

the directions below. The appearance of the

handle may vary from what is shown in the

illustrations

Mounting

Fasteners

Set Screw

Allen Wrench

Mounting Fasteners

24” (61 cm)

2” (5.08 cm)

between the back of the refrigerator and the

wall as well as on the sides of the refrigera-

tor and adjacent walls or objects.

Replacement of lamp

The refrigerator compartment lamp is a LED

interior lighting, so maintenance must be

performed by a qualied technician.

13INSTALLATION

ENGLISH

Removing/Assembling the

Refrigerator Doors

When it is necessary to move the refrigerator

through a narrow opening, removing the doors

is the recommended procedure.

Removing the Left (Freezer) Door

with Water Line Connection

wire

harness

hinge

cover

upper

hinge

WARNING

If your entrance door is too narrow

for the refrigerator to pass through,

remove the refrigerator doors and move

the refrigerator sideways through the

doorway.

Use two or more people to remove and

install the refrigerator doors. Failure to do

so can result in back or other injury.

Disconnect the electrical supply to the

refrigerator before installation. Failure

to do so could result in serious injury or

death.

Do not put hands, feet or other objects

into the air vents or bottom of the

refrigerator. You may be injured or receive

an electrical shock.

Be careful when handling the hinge and

stopper. You may be injured.

Remove food and bins before detaching

the doors and drawers.

hinge lever

upper hinge

CAUTION

Enough for

the water feed tube

to be completely

pulled out

120 mm

Support Block

2

1

3

1. Loosen the hinge cover screws and remove

the hinge cover. Disconnect all wire harnesses.

3. Remove the freezer compartment door by

lifting it upward. This time, the door should be

lifted enough for the water feed tube to be

completely pulled out.

When removing the upper hinge, be careful

that the door does not fall forward.

CAUTION

Before removing freezer door, disconnect

water line connectors (one white tube, one

blue tube).

Electric Shock Hazard

Removing the Right (Refrigerator) Door

1. Open the door. Remove the top hinge cover

screw.

NOTE: Do not remove freezer door if either

the white or blue tube is still connected. To

remove connectors use the support block

that is on the upper shelf in the refrigerator.

2.Use a

at blade screwdriver to pry back the

hooks (not shown) of the hinge cover from

the top of the refrigerator cabinet.

Lif

t up

the cover. Disconnect all wire harnesses.

Disconnect electrical supply to refrigerator

before installing.

Failure to do so could

result in death or serious injury.

2. Rotate the hinge lever counterclockwise ( )

and lift the upper hinge ( ).

Place the door, inside facing up, on a

non-scratching surface. Be careful not to

damage the water feed tube.

wire

harness

14 INSTALLATION

ENGLISH

3. Rotate the hinge lever clockwise (1). Lift the

upper hinge free of the hinge lever latch (2).

4. Lift the door from the lower hinge pin.

5. Place the door, inside facing up, on a non-

scratching surface.

Reinstalling the Right (Refrigerator) Door

1. Place the door onto the lower hinge pin.

2. Fit the upper hinge over the hinge lever

latch and into place. Rotate the lever

counterclockwise to secure the hinge.

Reinstalling the Left (Freezer) Door

1. Feed the water tubes through the lower

hinge pin and place the door onto the

lower hinge pin. Water hoses should be

behind the leg to prevent damage.

2. Fit the top hinge over hinge lever latch and

into place. Rotate the lever clockwise to

secure the hinge.

3. Install the grounding screw and connect all

the wire harnesses.

4. Hook the tab on the door switch side of the

cover, under the edge of the wire, opening

in the cabinet top. Position the cover into

place. Insert and tighten the cover screw.

5. Reconnect the water tubes by inserting

the tubes into the connectors. The tube is

inserted correctly when only one guide line

is showing out of two.

Insert Line

Tube

Collet

careful that the door does not

CAUTION

When lifting the hinge free of the latch, be

fall forward.

hinge lever

upper

hinge

lower hinge

NOTE

Do not remove the grease on the sur-

face of the gasket or hinge.

Do not remove the sensor assembly in

the right upper hinge cover.

Open the door and turn the hose toward the inside.

Tube is completely inserted when only one guide line

is showing out of two.

Water hoses should be cut with a clean, straight edge

to avoid leaks.

Water hoses should be behind the leg to prevent

CORRECT

INCORRECT

Not Straight Damaged Stretched

CORRECT

INCORRECT

3. Reconnect all wire harnesses. Hook the tab

on the switch side of the cover under the

edge of the wire opening in the cabinet top.

Position the cover and replace the screw.

damage.

15INSTALLATION

ENGLISH

Connecting the Water Line

Before You Begin

This water line installation is not covered by the

refrigerator warranty. Follow these instructions

carefully to minimize the risk of expensive water

damage.

Water hammer (water banging in the pipes)

in house plumbing can cause damage to

refrigerator parts and can lead to water leakage

or flooding. Call a qualified plumber to correct

water hammer before installing the water

supply line to the refrigerator.

Water Pressure

You will need a cold water supply. The water

pressure must be between 20 and 120 psi ( 138

– 827 kPa ) on

models without a water filter and

between 40 and 120 psi ( 276 – 827 kPa ) on

models with a water filter. If the water pressure

does not reach the minimum required pressure,

a separate booster pump may be required

for normal automatic icemaker and cool water

dispensing operation.

If a reverse osmosis water filtration system is

connected to your cold water supply, this water

line installation is not covered by the refrigerator

warranty. Follow these instructions carefully to

minimize the risk of expensive water damage.

If a reverse osmosis water filtration system is

connected to your cold water supply, the water

pressure to the reverse osmosis system needs

to be a minimum of 40 to 60 psi (276 - 413 kPa,

or less than 2.0~3.0 sec. to fill a cup of 7 oz

capacity).

If the water pressure from the reverse osmosis

system is less than 21 psi or 1.5 kgf/cm2 (takes

more than 4.0 sec to fill a cup of 7 oz capacity):

y Check to see if the sediment filter in

the reverse osmosis system is blocked.

Replace the filter if necessary.

y Allow the storage tank on the reverse

osmosis system to refill after

heavy usage.

y If the issue concerning water pressure

from reverse osmosis remains, call a

licensed, qualified plumber.

y All installations must be in accordance

with local plumbing code requirements.

What You Will Need

y Copper Tubing, ¼ in. outer diameter,

to connect the refrigerator to the water

supply. Be sure both ends of the tubing

are cut square.

To determine how

much tubing you

need: measure the

distance from the

water valve on the back of the refrigerator

to the water supply pipe. Then, add 8 feet

(2.4 m). Be sure there is sufficient extra

tubing (about 8 feet [2.4 m] coiled into 3

turns of about 10 in. [25 cm] diameter) to

allow the refrigerator to move out from

the wall after installation. Keep the total

length of the feed water pipe tube within

26 ft (8 m). Be careful to avoid getting a

kink in the tube. If the tube is longer than

26 ft (8 m), it may cause the water feed to

malfunction.

y Power drill.

y ½ in. or adjustable

wrench.

y Flat blade and Phillips

head screwdrivers.

y Two ¼ in. outer

diameter compression

nuts and 2 ferrules (sleeves) to connect

the copper tubing to the shutoff valve and

the refrigerator water valve.

CAUTION

To prevent burns and product damage, only

connect the refrigerator water line to a cold

water supply.

CAUTION

Do not install the icemaker tubing in areas

where temperatures fall below freezing.

CAUTION

Wear eye protection during installation to

prevent injury.

16 INSTALLATION

ENGLISH

y If your existing copper water line

has a flared fitting at the end, you

will need an adapter (available at

plumbing supply stores) to connect

the water line

to the

refrigerator OR

you can cut off

the flared fitting with a tube cutter

and then use a compression fitting.

y Shutoff valve to connect to the cold

water line. The shutoff valve should

have a water inlet with a minimum

inside diameter of 5/32 in. at the

point of connection to the COLD

WATER LINE. Saddle-type shutoff

valves are included in many water

supply kits.

Before

purchasing,

make sure

a saddle-

type valve complies with your local

plumbing codes.

NOTE

A self-piercing saddle type water valve

should not be used.

WARNING

Electrical Shock Hazard:

When using any electrical device (such as a

power drill) during installation, be sure the

device is battery powered, double insulated

or grounded in a manner that will prevent the

hazard of electric shock.

17INSTALLATION

ENGLISH

Water Line Installation Instructions

Install the shuto valve on the nearest

frequently used drinking water line.

1 SHUT OFF THE MAIN WATER SUPPLY

Turn on the nearest faucet to relieve the

pressure on the line.

2 CHOOSE THE VALVE LOCATION

Choose a location

for the valve that is

easily accessible. It is

best to connect into

the side of a vertical

water pipe. When it is

necessary to connect

into a horizontal water pipe, make the

connection to the top or side, rather

than at the bottom, to avoid drawing

o any sediment from the water pipe.

3 DRILL THE HOLE FOR THE VALVE

Drill a ¼ in. hole in

the water pipe using

a sharp bit. Remove

any burrs resulting

from drilling the

hole in the pipe. Be

careful not to allow

water to drain into

the drill. Failure to drill a ¼ in. hole may

result in reduced ice production or smaller

cubes.

4 FASTEN THE SHUTOFF VALVE

Fasten the shuto valve to the cold water

pipe with the pipe clamp.

5 TIGHTEN THE PIPE CLAMP

Tighten the clamp screws until the sealing

washer begins to swell.

NOTE:

Do not overtighten clamp or

you may crush the tubing.

6 ROUTE THE TUBING

Route the tubing between the cold water

line and the refrigerator.

Route the tubing through a hole drilled in

the wall or oor (behind the refrigerator or

adjacent base cabinet) as close to the wall as

possible.

NOTE

The hookup line cannot be white, plastic

tubing. Licensed plumbers must use only

copper tubing (NDA tubing #49595 or

#49599) or Cross Link Polyethylene (PEX)

tubing.

WARNING

When using any electrical device (such

as a power drill) during installation, be

sure the device is battery powered,

double insulated or grounded in a

manner that will prevent the hazard of

electric shock.

Pipe Clamp

Saddle-Type

Shuto Valve

Vertical Cold

Water Pipe

NOTE

Commonwealth of Massachusetts Plumbing

Codes 248CMR shall be adhered to. Saddle

valves are illegal and use is not permitted in

Massachusetts. Consult with your licensed

plumber.

Pipe Clamp

Clamp Screw

Washer

Inlet End

NOTE

Be sure there is sucient extra tubing (about

8 feet (2,4 m) coiled into 3 turns of about 10 in.

(0,25 m) diameter) to allow the refrigerator to

move out from the wall after installation.

18 INSTALLATION

ENGLISH

7 CONNECT THE TUBING TO THE VALVE

Place the compression nut and ferrule

(sleeve) for copper tubing onto the end of

the tubing and connect it to the shutoff

valve. Make sure the tubing is fully inserted

into the valve. Tighten the compression nut

securely.

8 FLUSH OUT THE TUBING

Turn the main water

supply on and flush

out the tubing until the

water is clear.

Shut the water off at the

water valve after about

one quart of water has

been flushed through the tubing.

9 CONNECT THE TUBING TO THE

REFRIGERATOR

NOTE: Before making the connection to

the refrigerator, be sure that the refrigerator

power cord is not plugged into the wall

outlet.

a. Remove the plastic flexible cap from the water

valve.

b. Place the compression nut and ferrule (sleeve)

onto the end of the tubing as shown.

c. Insert the end of the copper tubing into the

connection as far as possible. While holding

the tubing, tighten the fitting.

10 TURN THE WATER ON AT THE

SHUTOFF VALVE

Tighten any connections that leak.

11 PLUG IN THE REFRIGERATOR

Arrange the coil of tubing so that it does not

vibrate against the back of the refrigerator

or against the wall. Push the refrigerator

back to the wall.

12 START THE ICEMAKER

The icemaker will not begin to operate until

it reaches its operating temperature of 15°F

(–9°C) or below.

Turning On The Power

1

Plug in the

refrigerator.

Saddle-Type

Shutoff Valve

Packing Nut

Outlet Valve

Compression

Nut

Ferrule (sleeve)

Tubing Clamp

¼ in. Tubing

¼ in.

Compression

Nut

Refrigerator

Connection

Ferrule (sleeve)

CAUTION

Check to see if leaks occur at the water line

connections.

CAUTION

y Connect to a rated power outlet.

y Have a certified electrician check the wall

outlet and wiring for proper grounding.

y Do not damage or cut off the ground

terminal of the power plug.

19INSTALLATION

ENGLISH

Leveling

After installing, plug the refrigerator’s power

cord into a 3-prong grounded outlet and push

Your refrigerator has two front leveling legs—

one on the right and one on the left. Adjust the

legs to alter the tilt from front-to-back or side-to-

side. If your refrigerator seems unsteady, or you

want the doors to close more easily, adjust the

refrigerator’s tilt using the instructions below:

NOTE: Tools Required: 11/16” (18mm) wrench

ewdriver.

1 Turn the leveling leg counterclockwise

to raise that side of the refrigerator or

clockwise to lower it. It may take several

turns of the leveling leg to adjust the tilt of

the refrigerator.

Left leveling

leg

Height

di

erence

di erence

PRESS & HOLD

CHANGE FILTER

C

F

C

F

NOTE: Having someone push backward against the

top of the refrigerator takes some weight o

of the

leveling legs. This makes it easier to adjust the legs.

Right leveling leg

Height

di

erence

Height

di

erence

PRESS & HOLD

CHANGE FILTER

C

F

C

F

2 Open both doors again and check to make

sure that they close easily. If the doors do

not close easily, tilt the refrigerator slightly

more to the rear by turning both leveling

legs counterclockwise. It may take several

more turns, and you should turn both

leveling legs the same amount.

Door Alignment

If the doors are still uneven after the refrigerator

has been leveled,

nish adjusting the doors by

following the instructions below:

Adjusting tools: 5/16” (8mm) wrench and 3/4”

(19mm) wrench.

Height

di

erence

Height

di

erence

PRESS & HOLD

CHANGE FILTER

C

F

C

F

Up

Down

1

keeper nut

2

Adjustment

hinge pin

3

Tool for

adjustment

Using a 3/4” (19mm) wrench, turn the keeper

nut

to loosen the keeper nut.

Using a 5/16” (8mm) wrench, turn the

adjustment hinge pin clockwise or coun-

terclockwise to level the refrigerator door.

After leveling the door, turn the keeper

nut clockwise to tighten it.

CAUTION: Do not overtighten the door ad-

justment screw. The hinge pin can be pulled out

(adjustable range of height is a maximum of 2 in.

(5 cm).

20 HOW TO USE

ENGLISH

HOW TO USE

Before Use

OFF

Clean the refrigerator.

shipping.

Connect the power supply.

Check if the power supply is connected before use.

Read the “Turning On The Power” section.

Turn off the icemaker if the refrigerator is not yet connected to

the water supply.

Plug the power plug of the refrigerator into the grounded electric outlet and then

* This is applicable only to certain models.

Wait for the refrigerator to cool.

Allow your refrigerator to run for at least two to three hours before putting food

cooling.

The refrigerator makes a loud noise after initial operation.

This is normal. The volume will decrease as the temperature lowers.

Open refrigerator and freezer doors to ventilate the interior.

tape from inside the refrigerator and open the refrigerator and freezer doors for

ventilation.

CAUTION

Running the automatic icemaker before connecting it to the water supply

may cause the refrigerator to malfunction.

CAUTION

Putting food in the refrigerator before it has cooled could cause the food to

spoil, or a bad odor could linger inside the refrigerator.

CAUTION

Do not scratch the refrigerator with a sharp object or use a detergent that

or adhesive from the refrigerator.

on the rear surface of the refrigerator.

NOTE

Page is loading ...

LG GS74SGS User manual

LG GS74SGS User manual

Related papers

Other documents