Schwinn 470i Assembly & Owner's Manual

This product is compliant with the

applicable CE requirements.

ASSEMBLY MANUAL / OWNER’S MANUAL

470i

2

Important Safety Instructions - Assembly 3

Safety Warning Labels / Serial Number 4

Specications 5

BeforeAssembly 5

Parts 6

Hardware 7

Tools 7

Assembly 8

Moving the Machine 20

Leveling the Machine 21

Important Safety Instructions 22

Features 23

Console Features 24

Operations 29

Mounting and Dismounting 29

Power Up / Idle Mode 29

Quick Start Program 30

 UserProles 30

Pausing or Stopping 36

Results / Cool Down Mode 36

GOAL TRACK Statistics 37

Console Service Mode 39

Maintenance 41

Maintenance Parts 42

Troubleshooting 44

Table of ConTenTs

Nautilus,Inc.,www.NautilusInc.com,18225NERiversideParkway,Portland,OR97230,U.S.A.-CustomerService:

Tovalidatewarrantysupport,keeptheoriginalproofofpurchaseandrecordthefollowinginformation:

Serial Number __________________________

Date of Purchase ____________________

To register your product warranty, contact your local distributor.

If you have questions or problems with your product, please contact your local Schwinn

®

distributor.

To ﬁnd your local distributor, go to: www.nautilusinternational.com

3

Important Safety InStructIonS

-aSSembly

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Obey the following warnings:

Read and understand all warnings on this machine.

Carefully read and understand the Assembly instructions.

• Keepbystandersandchildrenawayfromtheproductyouareassemblingatalltimes.

• Donotconnectpowersupplytothemachineuntilinstructedtodoso.

• Donotassemblethismachineoutdoorsorinawetormoistlocation.

• Makesureassemblyisdoneinanappropriateworkspaceawayfromfoottrafficandexposuretobystanders.

• Somecomponentsofthemachinecanbeheavyorawkward.Useasecondpersonwhendoingtheassemblysteps

involvingtheseparts.Donotdostepsthatinvolveheavyliftingorawkwardmovementsonyourown.

• Setupthismachineonasolid,level,horizontalsurface.

• Donottrytochangethedesignorfunctionalityofthismachine.Thiscouldcompromisethesafetyofthismachineandwill

void the warranty.

• Ifreplacementpartsarenecessary,useonlygenuineNautilus®replacementpartsandhardware.Failuretousegenuine

replacementpartscancausearisktousers,keepthemachinefromoperatingcorrectlyandvoidthewarranty.

• Donotuseuntilthemachinehasbeenfullyassembledandinspectedforcorrectperformanceinaccordancewiththe

Manual.

• ReadandunderstandthecompleteManualsuppliedwiththismachinebeforefirstuse.KeeptheManualforfuture

reference.

• Doallassemblystepsinthesequencegiven.Incorrectassemblycanleadtoinjuryorincorrectfunction.

• Thisproductcontainsmagnets.Magneticfieldscaninterferewiththenormaluseofcertainmedicaldevicesataclose

range.Usersmaycomeintoproximityofthemagnetsintheassembly,maintenance,and/oruseoftheproduct.Giventhe

obviousimportanceofthesedevices,suchasapacemaker,itisimportantthatyouconsultwithyourmedicalprovider

inconnectionwiththeuseofthisequipment.Pleaseconsultthe“SafetyWarningLabelsandSerialNumber”sectionto

determine the location of the magnets on this product.

4

Safety WarnIng labelS and SerIal

number

SerialNumber

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES

PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.

X.X

X.XX

X.XXX

ANGULAR

C

SIZE

This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. All rights are reserved, including copyrights.

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

- -

APPROVALS

- -

- - - -

WARRANTY ITEM:

L.SEVIER

3/29/2013

L.SEVIER

A

8002739

GWl BIKE AND ELLIPTICAL 300lb 2013

MATERIAL.

COLOR.

DIE LINE

PMS 152

PMS 109

BLACK

WHITE

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

50mm

117.7mm

A RELEASE 3/29/2013

LSEVIER

xxxxxxx

• Lisez et assimilez tous les avertissements

apposés sur cet appareil.

• Gardez les enfants et les animaux de

compagnie éloignés de cette machine en

tout temps

• Déconseillé aux enfants âgés de

moins de 14 ans.

• Lisez et familiarisez-vous avec le Manuel

du propriétaire et avec tous les

avertissements avant d’utiliser cette

machine.

• Soyez prudent lorsque vous utilisez cet

équipement pour ne pas vous infliger de

graves blessures.

• Cette machine supporte un poids

maximal de 300lbs. (136kg).

• Remplacez toute étiquette

d’avertissement endommagée, illisible

ou manquante.

• La fréquence cardiaque qui s’affiche

sur la console peut être inexact et

doit être utilisée seulement à titre

indicatif.

• Read, understand and obey all

warnings on this machine.

• Keep children away.

• Not intended for use by anyone

under 14 years of age.

• Prior to use, read and understand

the Owner’s Manual.

• Injury or death is possible if

Caution is not used while using this

machine.

• The maximum user weight for this

machine is 300 lbs (136 kg).

• Replace any “Caution”, “Warning”

or “Danger” label that is illegible,

damaged, or removed.

• The heart rate displayed may be

inaccurate and should be used for

reference only.

8002739_A

ProductSpecifications

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES

PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.

X.X

X.XX

X.XXX

ANGULAR

C

SIZE

This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. All rights are reserved, including copyrights.

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

7-22-10

APPROVALS

- -

- - - -

WARRANTY ITEM:

A RELEASED

NPI 13149 DLOVELY

7-22-10

D.LOVELY

07 /22 / 2010

D.LOVELY

A

004-0930

CRUSH WARNING

21.78mm

54.8mm

MATERIAL.

COLOR.

DIE LINE

PMS 152

PMS 109

BLACK

WHITE

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

•

Grounding Instructions

Thisproductmustbeelectricallygrounded.Ifamalfunctionoccurs,correctgroundingdecreasestheriskofelectricshock.

Thepowercordisequippedwithanequipment-groundingconductor,andmustbeconnectedtoanoutletthatisproperly

installed and grounded.

Theelectricalwiringmustcomplywithallapplicablelocalandprovincialstandardsandrequirements.Incorrect

connectionoftheequipment-groundingconductorcanresultinariskofelectricshock.Consultalicensed

electricianifyouarenotsurethatthemachineiscorrectlygrounded.Donotchangetheplugonthemachine

– if it does not fit the outlet, have a correct outlet installed by a licensed electrician.

ASurgeProtectorDeviceisrecommendedtoprotectthemachine.

IfaSurgeProtectorDevice(SPD)isusedwiththismachine,besurethatitisUL1449ratedorequivalent,andmatches

thepowerratingofthisequipment(220-240VAC).Donotconnectotherappliancesordevicestothesurgeprotector

in combination with this machine.

Makesurethattheproductisconnectedtoanoutlethavingthesameconfigurationastheplug.Noadaptershouldbeused

with this product.

5

SpecIfIcatIonS

Before Assembly

Selecttheareawhereyouaregoingtosetupandoperateyourmachine.Forsafeoperation,thelocationmustbeona

hard,levelsurface.Allowaworkoutareaofaminimum193.4cmx300cm(76.2”x118.1”).Besurethattheworkout

spaceyouareutilizinghasadequateheightclearance,takingintoconsiderationtheheightoftheuserandthemaximum

incline of the elliptical machine.

Basic Assembly Tips

Followthesebasicpointswhenyouas-

semble your machine:

• Readandunderstandthe“Important

SafetyInstructions”beforeassembly.

• Collect all the pieces necessary for

each assembly step.

• Usingtherecommendedwrenches,

turn the bolts and nuts to the right

(clockwise)totighten,andtheleft

(counterclockwise)toloosen,unless

instructed otherwise.

• Whenattaching2pieces,lightlylift

andlookthroughtheboltholesto

help insert the bolt through the holes.

• Theassemblycanrequire2people.

Maximum User Weight: 136kg(300lbs.)

Machine Weight: 76.5kg(168.7lbs.)

Total Surface Area (foot print) of equipment:

    12734.2cm

2

(1976.8inches

2

)

Power Requirements:

 OperationalVoltage: 220V-240VAC,50Hz

 OperatingCurrent: 1A

Complies with the following directives: 2004/108/EC-Electromagnetic

Compatibility,2006/95/EC–LowVoltageDirective

This product has been tested to the following standards:

 EMC:

 EN55014-1:2006+A2:2011

 EN55014-2:1997+A2:2008

 Safety:

 IEC60335-1:2010Safetyofhouseholdandsimilarelectricalappliances

NationalDifferences:

 Australian/NewzealandAS/NZS60335.1:2011

 EuropeanGroupDifferences:EN60335-1:2012

160.5 cm

( 63.2” )

178.1 cm

( 70.1” )

71.5 cm

( 28.2” )

ThisproductconformstotheapplicableENISO20957InternationalStandardsforStationaryTrainingEquipment,ClassH.

DONOTdisposeofthisproductasrefuse.Thisproductistoberecycled.Forproperdisposalofthisproduct,please

follow the prescribed methods at an approved waste center.

3.0m ( 118.1” )

1.93m

( 76.2” )

0.6m

( 24” )

0.6m

( 24” )

0.6m

( 24” )

0.6m

( 24” )

6

Adecalhasbeenappliedtoallright(“R ”)andleft(“L ”)partstoassistwithassembly.

Item Qty Description Item Qty Description

1 1 ConsoleMast 12 1 UpperShroud

2 1 StaticHandlebar 13 1 FrontStabilizer

3 1 ArmPivotRod 14 2 HandlebarShroud,Inner

4 1 WaterBottleHolder 15 2 HandlebarShroud,Outer

5 1 Console 16 1 RightLeg

6 1 UpperLeftHandlebarArm 17 1 RightPedal

7 1 LowerLeftHandlebarArm 18 1 ShroudCap

8 1 LeftPedal 19 1 LowerRightHandlebarArm

9 1 Rail Assembly 20 1 UpperRightHandlebarArm

10 1 LeftLeg 21 1 PowerCord

11 1 Frame 22 1 MP3Cord

partS

1

4

6

5

2

3

12

7

8

10

11

9

18

16

13

20

19

17

15

14

15

14

21

22

7

HardWare / toolS

Tools

Included

Item Qty Description Item Qty Description

A 6 ButtonHeadHexScrew,M8x16(with

Loctite

®

adhesive)

F 6 WaveWasher

B 4 FlatWasher,M8 G 12 LockWasher,M8

C 8 WideWasher,M8 H 2 PivotSleeve

D 4 ButtonHeadHexScrew,M8x16 I 4 PhillipsHeadScrew,M5x12

E 2 HexHeadScrew,M8x20

6mm

A B C D E F

G H

I

#2

13mm

15mm

19mm

8

aSSembly

1. Attach Front Stabilizer to Frame

Note:Hardwareispre-installedandnotontheHardwareCard.*

13

11

6mm

*

X4

*

9

2. Attach Rail Assembly to Frame Assembly

Note:Hardwareispre-installedandnotontheHardwareCard.*

10

3. Connect the Cable and Attach the Console Mast to Frame Assembly

NOTICE:Donot crimp Console Cable.

18

1

12

B

D

G

6mm

X4

11

4. Attach Legs to Frame Assembly

10

16

A

C

G

F

X2

6mm

12

5. Attach Arm Pivot Rod and Lower Handlebar Arms to Frame Assembly

19

3

7

C

G

E

F

X2

13 mm

13

6. Attach Left Pedal to Frame Assembly

NOTICE:RepeatsteponoppositesidewiththeRightPedal(Item17).

F

A

C

G

8

17

C

H

G

A

6mm

14

7. Attach and Adjust the Upper Handlebar Arms to Frame Assembly

Note:Hardwareispre-installedandnotontheHardwareCard.*

MakesuretheUpperHandlebarArmsaresecurebeforeyouexercise.

6mm

20

6

*

X8

15

8. Attach Handlebar Shrouds to Frame Assembly

Note:Hardwareispre-installedandnotontheHardwareCard.*

15

14

15

14

I

#2

X4

16

9. Route Cables and Attach the Static Handlebar to Frame Assembly

NOTICE:DonotcrimptheConsoleCables.

2

*

X3

6mm

*

17

10. Attach Water Bottle Holder to Frame Assembly

Note:Hardwareispre-installedandnotontheHardwareCard.*

4

#2

*

X3

18

12. Connect Cables and Attach Console to Frame Assembly

NOTICE:Aligntheclipsonthecableconnectorsandmakesuretheconnectorslock.Donotcrimp cables.

11. Remove Hardware from Console

NOTICE:Donotcrimpthecable.

Note:Hardwareispre-installedandnotontheHardwareCard.*

5

*

X4

#2

5

*

X4

19

13. Connect the Power Cord to Frame Assembly

21

14. Final Inspection

Inspect your machine to ensure that all hardware is tight and components are properly assembled.

Be sure to record the serial number in the ﬁeld provided at the front of this manual.

Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner’s

Manual.

20

Moving the Machine

The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you

and others are all physically ﬁt and able to move the machine safely.

1. Removethepowercord.

2. UsetheTransportHandletocarefullyliftthemachineontothetransportrollers.

3. Pushthemachineintoposition.

4. Carefullylowerthemachineintoposition.

NOTICE:Becarefulwhenyoumovetheelliptical.Allabruptmotionscanaffectthecomputeroperation.

before you Start

Page is loading ...

Schwinn 470i Assembly & Owner's Manual

Schwinn 470i Assembly & Owner's Manual

Related papers

Other documents