User
information
Ceramic
hob
ZVT 64 X
2
Contents
Operating Instructions- - - - - - - - - - - - - - - 3
Safety instructions - - - - - - - - - - - - - - - - - 3
Description of the Appliance - - - - - - - - - - 4
Operating the appliance - - - - - - - - - - - - - 6
Tips on cooking and frying- - - - - - - - - - - - 9
Cleaning and care - - - - - - - - - - - - - - - - - 10
What to do if… - - - - - - - - - - - - - - - - - - - 11
Disposal - - - - - - - - - - - - - - - - - - - - - - - - 12
Installation Instructions- - - - - - - - - - - - - - 13
Assembly - - - - - - - - - - - - - - - - - - - - - - - 15
Service and Spare Parts- - - - - - - - - - - - - 19
Thank you for selecting our appliance
We wish you lots of enjoyment with your new appli-
ance and we hope that you will consider our brand
again when purchasing household appliances.
Please read this user manual carefully and keep it
throughout the product life cycle as a reference doc-
ument. The user manual should be passed on to any
future owner of the appliance.
The following symbols are used in this user information:
1
Warning! This must be read! Important advice for the safety of persons and information on
avoiding damage to the appliance
3 General information and advice
2 Information on environmental protection
z Dangerous voltage
3
Operating Instructions
1 Safety instructions
Please comply with these instructions. If you do
not, any damage resulting is not covered by the
warranty.
Correct use
• Persons (including children) who, due to their
physical, sensory or mental capacity or their
inexperience or lack of knowledge are una-
ble to use the appliance safely should not op-
erate this appliance without the supervision
or instruction of a responsible person.
• Do not leave the appliance unattended dur-
ing operation.
• This appliance should be used only for nor-
mal domestic cooking and frying of food.
• The appliance must not be used as a work
surface or as a storage surface.
• Additions or modifications to the appliance
are not permitted.
• Do not place or store flammable liquids, high-
ly inflammable materials or fusible objects
(e.g. plastic film, plastic, aluminium) on or
near the appliance.
Child safety
• Small children must be kept away from the
appliance.
• Only let bigger children work on the appli-
ance under supervision.
• To avoid small children and pets unintention-
ally switching the appliance on, we recom-
mend activation of the child safety device.
General safety
• The appliance may only be installed and con-
nected by trained, registered service engi-
neers, or competent persons.
• Built-in appliances may only be used after
they have been built in to suitable built-in
units and work surfaces that meet standards.
• In the event of faults with the appliance or
damage to the glass ceramic (cracks,
scratches or splits), the appliance must be
switched off and disconnected from the elec-
trical supply to prevent the possibility of an
electric shock.
• Repairs to the appliance must only be carried
out by trained registered service engineers.
Safety during use
• Overheated fats and oils can ignite very
quickly. Warning! Fire hazard!
• There is the risk of burns from the appliance
if used carelessly.
• Remove stickers and film from the glass ce-
ramic.
• Cables from electrical appliances must not
touch the hot surface of the appliance or hot
cookware.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched
off and cooled down.
• For safety reasons, the cleaning of the appli-
ance with steam jet or high-pressure clean-
ing equipment is not permitted.
4
How to avoid damage to the appli-
ance
• The ceramic glass can be damaged by ob-
jects falling onto it.
• The edge of the ceramic glass can be dam-
aged by being knocked by the cookware.
• Cookware made of cast iron, cast aluminium
or with damaged bottoms can scratch the ce-
ramic glass if pushed across the surface.
• Objects that melt and things that boil over
can burn onto the ceramic glass and should
be removed straightaway.
• To avoid damaging cookware and glass ce-
ramics, do not allow saucepans or frying
pans to boil dry.
• Do not use the cooking zones with empty
cookware or without cookware.
Description of the Appliance
Cooking surface layout
Single cooking zone 2300 W
Single cooking zone 1800 W
Single cooking zone 1200 W
Control panel Single cooking zone 1200 W
5
Control panel layout
Touch Control sensor fields
The appliance is operated using Touch Control
sensor fields. Functions are controlled by
touching sensor fields and confirmed by dis-
plays and acoustic signals.
Touch the sensor fields from above, without
covering other sensor fields.
Displays
On/Off
Heat setting selection
Display
Sensor field Function
On / Off Switches appliance on and off
Increase settings To increase heat settings
Reduce settings To reduce heat settings
Display Description
Cooking zone is switched off
- Heat settings Heat setting is set
Fault Malfunction has occurred
Residual heat Cooking zone is still hot
Child safety device Lock/child safety device is set.
Automatic switch off Switch off is active.
6
Residual heat indicator
1 Warning! Risk of burns from residual
heat. After being switched off, the cooking
zones need some time to cool down. Look
at the residual heat indicator
.
3 Residual heat can be used for melting and
keeping food warm.
Operating the appliance
Switching the appliance on and off
3
After switching on, within approx.
10 seconds a heat setting or a function
must be set, otherwise the appliance auto-
matically switches itself off.
Selecting the heat setting
Control panel Display
Switch on Touch for 2 seconds /
Switch off Touch for 1 second / none
Control panel Indicator
To increase Touch to
To decrease Touch to
To switch off Touch and at the same time
7
Using the child safety device
The child safety device prevents unintentional
use of the appliance.
Switching on the child safety device
Switching off the child safety device
3 The child safety device can only be
switched on and off, if no heat setting is
set.
Overriding the child safety device
The child safety device can be switched off in
this way for a single cooking session; it remains
activated afterwards.
Step Control panel Display/Signal
1. Switch on appliance (Do not set a
heat setting).
2. Touch of both the cooking zones at the front
simultaneously for 4 seconds.
3. Switch appliance off.
The child safety device is switched on.
Step Control panel Display/Signal
1. Switch on appliance (Do not set a
heat setting).
2. Touch of both the cooking zones at the front
simultaneously for 4 seconds.
3. Switch appliance off.
The child safety device is switched off.
Step Control panel Display/Signal
1. Switch appliance on
2. Touch of both the cooking zones at the front
simultaneously for 4 seconds.
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
8
3 After overriding the child safety device, a
heat setting or a function must be set with-
in approx.10 seconds, otherwise the ap-
pliance automatically switches itself off.
Automatic switch off
Cooking surface
• If after switching on the cooking surface, a
heat setting is not set for a cooking zone
within approx. 10 seconds, the cooking sur-
face automatically switches itself off.
• If one or more sensor fields are covered by
objects (a pan, cloths, etc.) for longer than
approx. 10 seconds, a signal sounds and the
cooking surface switches off automatically.
• If all cooking zones are switched off, the
cooking surface automatically switches itself
off after approx. 10 seconds.
Cooking zones
• If one of the cooking zones is not switched off
after a certain time, or if the heat setting is
not modified, the relevant cooking zone
switches off automatically. is displayed.
Before being used again, the cooking zone
must be set to .
Heat setting Switches off after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
9
Tips on cooking and frying
3 Information about acrylamides
According to the latest scientific research,
intensive browning of food, especially in
products containing starch, may present a
health risk due to acrylamide. Therefore
we recommend cooking at low tempera-
tures and not browning foods too much.
Cookware
• You can recognise good cookware from the
bottoms of the pans. The bottom should be
as thick and flat as possible.
• Cookware made of enamelled steel or with
aluminium or copper bottoms can leave dis-
colourations on the ceramic glass surface
which are difficult or impossible to remove.
Energy saving
2
Always place cookware on the cooking
zone before it is switched on.
2 If possible, always place lids on the pans.
2 Switch cooking zones off before the end of
the cooking time, to take advantage of re-
sidual heat.
2 Bottom of pans and cooking zones should
be the same size.
Examples of cooking applications
The information given in the following table is
for guidance only.
Heat
setting
Cooking
process
suitable for Cook time Tips/Hints
0 Residual heat setting, Off position
1
Keeping
food warm
Keeping cooked foods warm as required Cover
1-2
Melting
Hollandaise sauce,
melting butter, chocolate, gelatine
5-25 mins. Stir occasionally
Solidifying Fluffy omelettes, baked eggs 10-40 mins. Cook with lid on
10
Cleaning and care
1 Take care! Risk of burns from residual
heat.
1 Important Sharp objects and abrasive
cleaning materials will damage the appli-
ance. Clean with water and washing up liq-
uid.
1 Important Residues from cleaning
agents will damage the appliance. Re-
move residues with water and washing up
liquid.
Cleaning the appliance after each
use
1.Wipe the appliance with a damp cloth and a
little washing up liquid.
2.Rub the appliance dry using a clean cloth.
Removing deposits
1.Place the scraper on the glass ceramic sur-
face at an angle.
2.Remove residues by sliding the blade over
the surface.
3.Wipe the appliance with a damp cloth and a
little washing up liquid.
4.Rub the appliance dry using a clean cloth.
2-3
Simmer-
ing
Simmering rice and milk-based
dishes
Heating up ready-cooked meals
25-50 mins.
Add at least twice as much liq-
uid as rice, stir milk dishes part
way through cooking
3-4
Steaming
Braising
Steaming vegetables, fish
Braising meat
20-45 mins.
With vegetables add only a lit-
tle liquid (a few tablespoons)
4-5 Boiling
Steaming potatoes 20-60 mins.
Use only a little liquid, e. g.:
max.
¼ l water for 750 g of
potatoes
Cooking larger quantities of food,
stews and soups
60-150 mins. Up to 3 l liquid plus ingredients
6-7
Gentle
frying
Frying escalope, veal cordon bleu,
cutlets, rissoles, sausages, liver,
roux, eggs, pancakes, doughnuts
as required Turn halfway through cooking
7-8
Heavy
frying
Hash browns, loin steaks, steaks,
Flädle (pancakes for garnishing
soup)
5-15 mins.
per pan
Turn halfway through cooking
9
Boiling
Searing
Deep
frying
Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast),
deep frying chips
Heat
setting
Cooking
process
suitable for Cook time Tips/Hints
11
*Scrapers and cleaners for glass ceramic and stainless
steel can be purchased in specialist shops, supermarkets,
the parts department of your local Service Force Centre or
from www.shop.electrolux.co.uk
3 Remove stubborn residues with a cleaner
for glass ceramic or stainless steel.
3 Scratches or dark stains on the glass ce-
ramic that cannot be removed do not how-
ever affect the functioning of the appliance.
What to do if …
Remove
Type of dirt
immedi-
ately
when the appliance has
cooled down
using
sugar, food containing sugar yes ---
a scraper*
plastics, tin foil yes ---
limescale and water rings --- yes
cleaner for glass ceramic
or stainless steel*
fat splashes --- yes
shiny metallic discolouration --- yes
Problem Possible cause Remedy
The cooking zones will not switch on
or are not functioning
More than 10 seconds have passed
since the appliance was switched on
Switch the appliance on again.
The child safety device is switched
on
Deactivate the child safety device
(See the section “Child safety de-
vice”)
Several sensor fields were touched
at the same time
Only touch one sensor field
Automatic switch off has been trig-
gered
Remove any objects (pan, cloths,
etc.) that are lying on the control
panel. Switch the appliance on
again
Acoustic signal sounds when appli-
ance is switched off
The control panel is wholly or partly
covered by objects.
Remove objects.
The residual heat indicator is not
displaying anything
The cooking zone was only on for a
short time and is therefore not hot
If the cooking zone is supposed to
be hot, call your local Service Force
Centre.
Acoustic signal sounds and appli-
ance switches itself on and then off
again; after 5 seconds another
acoustic signal sounds
The On/Off sensor field has been
covered up, e.g. by a cloth
Do not place any objects on the con-
trol panel
12
If you are unable to remedy the
problem by following the above
suggestions, please contact your
local Service Force Centre.
1 Warning! Repairs to the appliance are
only to be carried out by qualified service
engineers. Considerable danger to the
user may result from improper repairs.
3 If the appliance has been operated incor-
rectly, the engineer's visit will be chargea-
ble, even during the warranty period.
Disposal
2 Packaging material
The packaging materials are environmen-
tally friendly and can be recycled. The
plastic components are identified by mark-
ings, e.g. >PE<, >PS<, etc. Please dis-
pose of the packaging materials in the
appropriate container at your local waste
disposal facilities.
2 Old appliance
The symbol
W on the product or on its
packaging indicates that this product may
not be treated as household waste. In-
stead it shall be handed over to the appli-
cable collection point for the recycling of
electrical and electronic equipment. By en-
suring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and hu-
man health, which could otherwise be
caused by inappropriate waste handling of
this product. For more detailed information
about recycling of this product, please con-
tact your local city office, your household
waste disposal service or the shop where
you purchased the product.
is lit Overheating protection for the cook-
ing zone has been triggered
Switch off the cooking zone. Switch
the cooking zone on again
Automatic switch off has been trig-
gered
Switch off the cooking zone. Switch
the cooking zone on again
and number are displayed Electronics fault Disconnect the appliance from the
electrical supply for a few minutes
(Take the fuse out of the house’s wir-
ing system)
If after switching on again, is dis-
played again, call the customer
service department
Problem Possible cause Remedy
13
Installation Instructions
1 Safety instructions
Warning! This must be read!
The laws, ordinances, directives and standards
in force in the country of use are to be followed
(safety regulations, proper recycling in accord-
ance with the regulations, etc.)
Installation may only be carried out by a quali-
fied electrician.
The minimum distances to other appliances
and units are to be observed.
Anti-shock protection must be provided by the
installation, for example drawers may only be
installed with a protective floor directly under-
neath the appliance.
The cut surfaces of the worktop are to be pro-
tected against moisture using a suitable seal-
ant.
The sealant seals the appliance to the work top
with no gap.
The sealant seals the appliance to the work top
with no gap.
Do not use silicon sealant between the appli-
ance and the work top.
Avoid installing the appliance next to doors and
under windows. Otherwise hot cookware may
be knocked off the rings when doors and win-
dows are opened.
z Risk of injury from electrical
current.
• The electrical mains terminal is live.
• Make electrical mains terminal free of volt-
age.
• Follow connection schematic.
• Observe electrical safety rules.
• Ensure anti-shock protection by installing
correctly.
• The appliance must be connected to the
electrical supply by a qualified electrician.
z Risk of injury from electrical
current.
• Loose and inappropriate plug and socket
connections can make the terminal overheat.
• Have the clamping connections correctly in-
stalled by a qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase
connection, the appropriate mains cable of
type H05BB-F Tmax 90°C (or higher) or an
equivalent type must be used.
• If this appliance’s mains cable is damaged, it
must be replaced by a special cable (type
H05BB-F Tmax 90°C; or higher) or an equiv-
alent type. Please contact your local Service
Force Center for further advice.
A device must be provided in the electrical in-
stallation which allows the appliance to be dis-
connected from the mains at all poles with a
contact opening width of at least 3 mm
Suitable isolation devices include line protect-
ing cut-outs, fuses (screw type fuses are to be
removed from the holder), earth leakage trips
and contactors.
14
Electrical Connection Diagram
For UK only: 230V...240V~
15
Assembly
16
17
18
Rating Plate
55HAD54AO
ZVT 64 X
6,5 kW
949 592 980
230 V 50 Hz
ZANUSSI
19
Service and Spare Parts
In the event of technical faults, please first
check whether you can remedy the problem
yourself with the help of the operating instruc-
tions (section “What to do if…”).
If you were not able to remedy the problem
yourself, please contact the Customer Care
Department or one of our service partners.
In order to be able to assist you quickly, we re-
quire the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by the appli-
ance
So that you have the necessary reference num-
bers from your appliance at hand, we recom-
mend that you write them in here:
Model description: .....................................
PNC: .....................................
S No: .....................................
www.electrolux.com
www.zanussi-electrolux.co.uk
867 201 501-A-110708-02 Subject to change without notice
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Zanussi ZVT 64 X User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Progress PES6060E User manual
-
Progress PAI8000E User manual
-
Electrolux EHD60010P User manual
-
Aeg-Electrolux 76301K-MN 71F User manual
-
-
-
-
-
-
Aeg-Electrolux 98030KF-SN User manual