Sharp PN-65TH1 Owner's manual

PN-65TH1
Sharp
Brand
Sharp
Model
PN-65TH1
Type
Owner's manual

This manual is also suitable for

Sharp PN-65TH1 is a 65-inch LCD monitor with various connectivity options and advanced features for an immersive viewing experience. It comes with multiple printed circuit boards, including a power board, video board, ARM board, touch panel board, option board, and IR/key board. The device is powered by a CR2032 Lithium Coin battery on the Main I/F PWB and AAA batteries for the remote control. It also features an LCD module with a touch panel and external electric cables, including two types of power cords for EU and UK regions.

Sharp PN-65TH1 is a 65-inch LCD monitor with various connectivity options and advanced features for an immersive viewing experience. It comes with multiple printed circuit boards, including a power board, video board, ARM board, touch panel board, option board, and IR/key board. The device is powered by a CR2032 Lithium Coin battery on the Main I/F PWB and AAA batteries for the remote control. It also features an LCD module with a touch panel and external electric cables, including two types of power cords for EU and UK regions.

Dismantle Instruction
1
Dismantle Instruction
LCD MONITOR
MODEL
PN-65TH1
Dismantle Instruction
2
Table of contents
1. Scope ............................................................................................................... 3
2. Tools for dismantling............................................................................................. 3
3. Dismantle Procedure ............................................................................................ 3
4. Back covers ........................................................................................................ 4
5. Printed circuit boards ........................................................................................... 5
6. Battery .............................................................................................................. 6
7. LCD Module ........................................................................................................ 7
8. Capacitors .......................................................................................................... 8
9. Parts List ........................................................................................................... 8
Dismantle Instruction
3
1. Scope
This document describes dismantling instruction according to Annex VII of Directive 2012/19/EU.
2. Tools for dismantling
Below tools are required to dismantle this product.
- Screw Driver
- Nipper
3. Dismantle Procedure
This product can be dismantled by below steps.
1. Remove Back covers (section 4)
2. Remove the shielding
3. Remove Printed circuit boards (section 5)
4. Remove Battery (section 6)
5. Dismantle LCD (section 7)
6. Remove Electrolyte Capacitors (section 8)
Dismantle Instruction
4
4. Back covers
Back covers can be removed by screw driver.
Dismantle Instruction
5
5. Printed circuit boards
All PWBs can be removed by screw driver.
Power board (1pcs) Video board (1pcs)
ARM board (1pcs) Touch panel board (1pcs)
Option board (1pcs) IR/Key board (1pcs)
Dismantle Instruction
6
6. Battery
This model uses CR2032 Lithium Coin battery on Main I/F PWB and AAA battery for remote control.
Battery can easily be removed from the battery holder.
Dismantle Instruction
7
7. LCD Module
LCD Dismantle procedure
1. Remove the Brackets for touch panel mounting
2. Remove the Touch panel
3. Remove the Rear cover
4. Remove the PWBs
5. Remove the Cables
LCD
Dismantle Instruction
8
8. Capacitors
Electrolyte Capacitors which diameter/height is larger than 25mm is installed on the Power PWB.
These capacitors can be removed by using nipper to cut the leads.
9. Parts List
Parts described in Annex VII of directive 2012/19/EU are as below.
Parts
Note
LCD
65inch LCD module
Batteries
Battery CR2032 of the main board
Battery(AAA) of remote control
Printed Circuit Boards
Power board
Video board
ARM board
Touch panel board
Option board
IR/Key board
Electrolyte capacitors
(height >25mm, diameter >25mm)
On the Power PWB
External electric cables
2 kinds of Power Cord
- CEE 7 (for EU)
- Type-BF (for UK)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Sharp PN-65TH1 Owner's manual

PN-65TH1
Sharp
Brand
Sharp
Model
PN-65TH1
Type
Owner's manual
This manual is also suitable for

Sharp PN-65TH1 is a 65-inch LCD monitor with various connectivity options and advanced features for an immersive viewing experience. It comes with multiple printed circuit boards, including a power board, video board, ARM board, touch panel board, option board, and IR/key board. The device is powered by a CR2032 Lithium Coin battery on the Main I/F PWB and AAA batteries for the remote control. It also features an LCD module with a touch panel and external electric cables, including two types of power cords for EU and UK regions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents