E Instruments AQ 200 Instructions Manual
- Category
- Measuring, testing & control
- Type
- Instructions Manual
E Instruments AQ 200 - is a portable and versatile device that can be used to measure a wide range of environmental parameters, including air quality, temperature, humidity, and pressure. It is ideal for use in a variety of applications, including indoor air quality monitoring, HVAC testing and balancing, and environmental monitoring.
The AQ 200 features a large, easy-to-read display that can show up to six measurements simultaneously. It also has a built-in data logger that can store up to 20,000 measurements.
E Instruments AQ 200 - is a portable and versatile device that can be used to measure a wide range of environmental parameters, including air quality, temperature, humidity, and pressure. It is ideal for use in a variety of applications, including indoor air quality monitoring, HVAC testing and balancing, and environmental monitoring.
The AQ 200 features a large, easy-to-read display that can show up to six measurements simultaneously. It also has a built-in data logger that can store up to 20,000 measurements.
AQ 200
AQ 200
Air Quality
3
Table of contents
I – Technical specifications.............................................................................................4
Technical features..................................................................................................................................4
Specifications...........................................................................................................................................4
II – Introduction...................................................................................................................5
Description................................................................................................................................................5
Connections..............................................................................................................................................6
III – Browsing........................................................................................................................7
IV – Menus............................................................................................................................8
Probe menu...............................................................................................................................................8
Using wire probes and modules............................................................................................................8
Use wireless probes..................................................................................................................................8
Functions...................................................................................................................................................8
Hold - Min/Max...........................................................................................................................................8
Configuration................................................................................................................................................9
Thermocouple type............................................................................................................................................9
Display....................................................................................................................................................................9
Units........................................................................................................................................................................9
Delta T.............................................................................................................................................................9
Alarms.............................................................................................................................................................9
Recording.......................................................................................................................................................9
Parameters...................................................................................................................................................11
Language...............................................................................................................................................................11
Date / time..........................................................................................................................................................11
Beep........................................................................................................................................................................11
Extinction..............................................................................................................................................................11
RF logging.............................................................................................................................................................11
Contrast................................................................................................................................................................11
Backlit.....................................................................................................................................................................11
Key locking............................................................................................................................................................11
Code........................................................................................................................................................................11
Downloading data...................................................................................................................................11
V – General information...................................................................................................12
Info menu...................................................................................................................................................12
Maintenance.............................................................................................................................................12
Warranty...................................................................................................................................................12
Display
! " #
Housing$%&'()
Keypad*)+
Conformity,"
!-.,-/) #
Power supply 012
Operating environment-"
Operating temperature34
Storage temperature)534
Auto shut-off+
Weight/"
Languages, ".
4
Technical features
Specifications
I – Technical specifications
Sensing elements
AQ200 connection (see p.6)
Air quality probe
CO2 :-$2 !- 6) #
CO : ,
Temperature : %&
Hygrometry :6"
Climatic conditions module
Hygrometry :6"
Temperature :
Air pressure :6
Thermocouple probes :78 9
Pt100 Smart-plus probes :%:/
Measuring units Measuring ranges Accuracy* Resolutions
0& 0
0
:&
;0
;0
;&
343.
)534 ;< ";/34 34
;
CURRENT / VOLTAGE
CO / Temperature
)/34
)=34
)34
;34;<2 "6>>>
;34;<2 "6>>>
;34;<2 "6>>>
34
34
34
343. 7?
8?
9?
THERMOCOUPLE (See related datasheet)
CLIMATIC CONDITIONS
@"
&
<2@
A<2@ Accuracy** (Repeatability, linearity,
hysteresis) ?;<2@!34B34#
Factory calibration uncertainty:;<2@
Temperature dependence :
;!9)#<2@!9C349D34#
<2@
% ;/% %
%
9 )534 ;< ";/34 34
343.
Pt100 Smart-plus or wireless probes (See related datasheet)
)34
!& "#
;/< ";34
!& "# 34
343.
343.
)534 ;< ";/34 34
;/< ";
CO2 / Temperature
343.
<2@
)534 ;< ";/34 34
A<2@
;/< ";
CO2 / Temperature / Hygrometry
See Climatic conditions module <2@
4E
9
4E
9
4E
9
@"
0
0
&
+
>& F " FG
>>&-.H)/ 4:@I2E*,9,2(&1! &1#F F6"6;<2@F 34 " "A<2@( <2@:
>>>96 34 "6 E ""6
;/< ";
5
Description
II – Introduction
6
Interchangeable measurement modules
1. Current / voltage module
$ "F()" JF
$ F 6" V/A1 VA/2
F :6"
2. Thermocouple module
$ F Tc1,
Tc2, Tc3 Tc4 F K, J T F F
G F
Wire probes with Smart plus system
KF()" JF
* ) C1
* ) C2
%
)$- C1 :
C2
Wireless probe/instrument communication
K F F" F)
(* ) 4
Connections
II – Introduction
3. Climatic conditions module
$F" Hygro
Ptx
PATM
%9
4E:9
4E:9
4E:9:@"
% Tr1Tr2 F F
Wireless probes shall be located near the instrument for initial recognition. Connection between AQ200
and wireless probes must be established. See submenu ''Wireless probes'' p 8.
7
III – Browsing
Power-up
, F
! "6#
e
Homepage display
Probes display
Measurement display
Infos Probe Params
Probe connection
( F"
4 66F
Infos Measure Params ( F
FF
Measurement
Communication interrupted
4
( F
FF
( F
FF
2
6
Rec.
Hold Config
Delta T
Params
Probe Alarms
Probe menu
9F "
I F ") ?
)@)* :*
)4 "
)9
)%
)4
)2 "
8
IV – Menus
Infos Measure
Probe display
Params
Functions
Hold- Min./Max.
% HOLD ? "
% Min-Max ? 6
%/?
Measurement display
Rec.
Hold Config
Delta T
Params
Probe Alarms
Sondes RF
RF probes display
RF probes searching
RF probes detected
RF probes display
1. Using wire probes and modules
K F()" J
9LLProbeLL F 9 F6F
""C2, Module, C1 wireless connections
!(MB4 BN #
Available information are :
•( ( + %(!
#
E 6
E 6
2. Using wireless communication
A- Add a wireless probe
& "LLProbeLL
&KF "LLRF probesLL
&/( NewF
&%F 1, E
" J
1 F F F
" J K F
B- Select a wireless probe already created.
'%FF! * #
'LLProbeLL
'/KF "LLRF probesLL&F
" J
'(FF
' "F
', FFF FOK
Del
9
IV – Menus
Alarms
(6ON OFF F 4
?4E1!4E #4E1! 4E #F
" 4 FOK
( FOK 4E (5O" F
"F1F "thresholds FOK
Recording
Select dataset
Enter name
Manual dataset
Configuration
If you use thermocouple probes, you must enter type into the Configuration sub-function.
Configuration sub-function allows to:
• Select thermocouple
4 OK ?6!789#
(F 4 FOK
• Select display
4 OK ( GFF FOK(6ON
OFF F 4 FOK
• Select units
4 OK ? 6. GF
4 FOK
4 Esc 6
Delta T
K F%9 &P 6?
F C2 C1T2 T1T4 T3
(Delta T 6F
$Delta T" 9
&manual dataset "
a4 OK
b(Manual F 4 FOK
c(Name F 4 FOK , FF
e4 FOK
d.. " OKF9
e.96 SaveF
1.1 Manual dataset
92 " F I F
* 8,000 50
& "&P 6 " 9
F 6 6"9 L
""")(F
1. Create or launch a continuous dataset
Auto dataset
& automatic dataset " F 6
a4 OK
b(Auto. F 4 FOK
c(Name F 4 FOK , FF
e
4 FOK
d, 6F "PeriodF(
Duration Interval F 4 FOK, FF
! 6#4 FOK
e.(Start "
1.2 Automatic dataset
2. Launch a planned dataset
4. Delete all datasets
(DeleteF 4 FOK
& 6 .
6 % 6F
a4 OK
b(Planned F 4 FOK
c4 F 4 FOK
d( F 4 FOK
10
IV – Menus
3. Preview of tables of points of datasets
a.Recording
b. (Display4 OK6
c. (dataset nameFF 4 OK6
( . ?
●( "Ft u
● "Fp q
d.4 Mesure 6
. ?
●'F6 "Prev.Next.
●4 " FF
●' "Visu.
I 6 Dataset summary
Dataset table
Parameters
4 OK , F 6 "F2
4 FOK
9) F 4 OK (6ON OFF
F
4 FOK
9) F ) 4 OK
(F OFF ) ! #
4 FOK
•Date / time
•Beep
•Extinction
4 OK ""6
( ""FF 4 FOK
•Language
•RF logging
9) F RF logging4 OK (6ON OFF
F
4 FOK
1"") III – Read device"
Downloading data
11
IV – Menus
NTang – AQ 200 – 02/09 C – We reserve the right to modify the characteristics of our product
7$*E + " 6G
$ "P F
7$*E$ 6)" "! &)((6G#
Maintenance
Warranty
Info menu
9 F6F F6
Battery
K "?
26
26
/$ F!&&)120# FF "
2
12
V –General information
Distributed by:
E Instruments Group LLC
172 Middletown Blvd - Suite B201
Langhorne, PA 19047
Tel.: 215 750 1212
Fax: 215 750 1399
e-mail: info@eintrumentsgroup.com
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
E Instruments AQ 200 Instructions Manual
- Category
- Measuring, testing & control
- Type
- Instructions Manual
E Instruments AQ 200 - is a portable and versatile device that can be used to measure a wide range of environmental parameters, including air quality, temperature, humidity, and pressure. It is ideal for use in a variety of applications, including indoor air quality monitoring, HVAC testing and balancing, and environmental monitoring.
The AQ 200 features a large, easy-to-read display that can show up to six measurements simultaneously. It also has a built-in data logger that can store up to 20,000 measurements.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
sauermann VT 210 Owner's manual
-
sauermann TM 210 Owner's manual
-
sauermann AMI 310 User manual
-
sauermann HQ 210 Owner's manual
-
Kimo TT 21 User manual
-
sauermann MP 210 Owner's manual
-
-
sauermann Kimo Kistock KCC 320 User manual
-
sauermann AQ 110 User guide
-