State Industries SRESS00406 User manual

  • Hello! I am an AI chatbot trained to assist you with the State Industries SRESS00406 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
THIS PRINTOUT IS FOR REFERENCE ONLY!
Do not use this printout for color match or critical dimensions.
Printout made at 70% of final size.
THIS FILE HAS NOT BEEN TRAPPED.
This file was created with Adobe Illustrator CS.
DO NOT try to open this file with earlier versions.
Marketing Support Inc. assumes no responsibility for final print quality and
will not be held liable for errors or omissions due to alterations made to this
document by client, film or print vendor.
MSI re
quires a Chromalin or color key type proof for final approval.
Front
For Additional Technical Information,
PHONE 800-365-0024
STATE WATER HEATERS
500 Tennessee Waltz Parkway, Ashland City, TN 37015
www.statewaterheaters.com
Page 1 of 2
SRESS00406
This 80-gallon electric water heater is equipped with two heating elements, with thermostats that are adjustable
up to 180ºF, to provide sanitizing hot water required in a dairy barn environment. It is also shipped with a base
with 4" legs, to raise the water heater off the floor to simplify and maintain sanitary conditions.
Self-Cleaning Turbo Coil Dip Tube
• Designed with jet ports that direct incoming cold water
to create turbulence and reduce sediment buildup in
the tank
• Reduced sediment buildup helps prolong tank life
and maximizes high energy-efficiency
Made from State PEXAN
, a cross-linked polymer that can withstand
long-term exposure to temperatures up to 400ºF
Two 4500-Watt Heating Elements, Each with
180ºF Thermostat
Elements are available non-simultaneous or simultaneous with off-peak
metering as demanded by zone requirements
180ºF thermostat allows hot water sanitization
Glass-Lined Tank with Two Anode Rods
Provides maximum protection against corrosion
2" Thick (R-16) Foam Insulation for High Energy-Efficiency
Durable Brass Tamper-Resistant Drain Valve
Factory-Installed Temperature and Pressure (T&P)
Relief Valve
Certified to UL 174 for Electric Water Heaters
Additional code compliance: CEC, CABO, HUD, BOCA National
Codes, ASHRAE/IES 90.1-1999 and 2004 NAECA
3-Year Limited Tank Warranty, 1-Year Limited
Parts Warranty
Consult written warranty or contact State Water Heaters for
complete information
SELECT
®
DAIRY BARN
Self-Cleaning Electric Water Heater
MYK
Job #: SWHM_112060
File Name: SWHM_112060_DairyBarnHeater_SS.ai
Size: 8.5" x 11"
Printing & Finishing: 4/C Offset
Revision: 6
Back
For Additional Technical Information,
PHONE 800-365-0024
STATE WATER HEATERS
500 Tennessee Waltz Parkway, Ashland City, TN 37015
www.statewaterheaters.com
Page 2 of 2
Printed in U.S.A.©2006 State Industries, Inc.SWHM-112060-2.5M-MSI-0306SRESS00406
A
B
4"
C
8"
HOT
CONNECTION
ANODE
ROD
COLD
CONNECTION
State Industries, Inc. reserves the right to make product changes or improvements without prior notice.
SELECT
®
DAIRY BARN
Self-Cleaning Electric Water Heater
STANDARD RECOVERY
MODEL
FIRST HOUR
GALLON ELEMENT 90°F RISE R
APPROX.
.
NUMBER
RATING
CAPACITY WATTAGE* GALLONS VALUE
A B C
SHIPPING
(GALLONS)
240 VAC PER HOUR
WEIGHT
PE 82 20DT 86 80 4500 21 16 67-1/2 60 24 210
Inlet and outlet connections: 3/4"
Single-element models not available on dairy barn models.
This model uses 1" screw-in elements.
*Maximum element wattage 6000 watts
DIMENSIONS IN INCHES
/