Dynex 7-Port Quick setup guide

Dynex
Brand
Dynex
Model
7-Port
Category
Interface hubs
Type
Quick setup guide

This manual is also suitable for

Dynex 7-Port USB 2.0 Hub expands your computer's capabilities by adding seven additional USB ports, allowing you to connect a variety of devices such as external hard drives, printers, and keyboards. It supports hot-swapping and Plug & Play, making it easy to connect and disconnect devices without having to restart your computer. Additionally, the hub features a blue LED power indicator and supports over-current protection, ensuring the safety of your connected devices.

Dynex 7-Port USB 2.0 Hub expands your computer's capabilities by adding seven additional USB ports, allowing you to connect a variety of devices such as external hard drives, printers, and keyboards. It supports hot-swapping and Plug & Play, making it easy to connect and disconnect devices without having to restart your computer. Additionally, the hub features a blue LED power indicator and supports over-current protection, ensuring the safety of your connected devices.

Before using your new product, please read these instructions to prevent
any damage.
USB 2.0 7-Port Hub /
USB 3.0 4-Port Hub
DX-U27H41 / DX-U34H41
Package contents
• USB 2.0 7-Port Hub
-or-
USB 3.0 4-Port Hub
• AC adapter 5V/3.6A
• USB cable
• Quick Setup Guide
System requirements
• Computer with a USB 2.0 or 3.0 port
Note: USB 3.0 is compatible with USB 2.0,
however data transfer speed will be limited
to the 2.0 level.
• Latest version of Windows® 8,
Windows® 7, Windows Vista®, or
Windows® XP; or Mac OS X 10.4 or later
Features
• Backwards compatible with
previous-generation USB revisions
• Adds expansion ports with
supplemental power to your computer
• Blue LED power indicator
• Supports hot-swappable and Plug &
Play capability
• Supports over-current protection at
USB host port
DX-U27H41
DX-U34H41
QUICK SETUP GUIDE
Upstream port (to computer)
DC jack
LED
Downstream ports (to devices)
Upstream port (to computer)
DC jack
LED
Downstream ports (to devices)
V1 ENGLISH 13-0733
Installing your hub
Note: When you connect your hub to a
computer, the computer detects your hub and
automatically installs the driver.
1 Connect the smaller end of the USB
cable to the upstream port on the rear
of the hub, then connect the larger end
of the USB cable to an open USB port
on your computer.
2 Plug the AC power adapter into your
hub’s DC jack and into a power outlet.
3 Connect your USB devices into your
hub.
Note: Do not disconnect from your
computer or USB device during data
transfer. Doing so may corrupt your data or
damage your devices.
DX-U27H41
DX-U34H41
One-year limited warranty
For complete warranty, visit
www.dynexproducts.com.
Contact Dynex:
For customer service, call 1-800-305-2204
(U.S. and Canada) or 01-800-926-3020
(Mexico)
www.dynexproducts.com
DYNEX is a registered trademark of BBY Solutions, Inc.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn
Ave South, Richeld, MN 55423 U.S.A.
©2013 BBY Solutions, Inc. All Rights Reserved.
  • Page 1 1
  • Page 2 2

Dynex 7-Port Quick setup guide

Dynex
Brand
Dynex
Model
7-Port
Category
Interface hubs
Type
Quick setup guide
This manual is also suitable for

Dynex 7-Port USB 2.0 Hub expands your computer's capabilities by adding seven additional USB ports, allowing you to connect a variety of devices such as external hard drives, printers, and keyboards. It supports hot-swapping and Plug & Play, making it easy to connect and disconnect devices without having to restart your computer. Additionally, the hub features a blue LED power indicator and supports over-current protection, ensuring the safety of your connected devices.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents