3
EN
3 Memory Pre-sets
Simply nd a radio frequency with little or no interfer-
ence, and rmly depress one of the 3 buttons on the
front of the unit, beneath the LCD display. Hold button
until display lights on the transmitter blink 2-3 seconds.
This will store the frequency into memory. Store up
to 2 more frequencies utilizing the remaining buttons.
When your Philips FM Transmitter is turned off and
restarted, the memory feature will conveniently retune
to the frequency you were using.
• The Philips FM Transmitter transmits on the full
spectrum of the FM band. So select any frequency
with little interference in your traveling area and
tune in.
• The Memory Pre-set buttons should be located at the
bottom front when the unit is installed correctly.
Compatibility
The Philips FM Transmitter is designed to work with any
portable personal audio device. Typical uses for Philips
FM Transmitter include:
• Portable MP3 digital audio players
• Portable DVD players
• Portable CD players
• Laptop Computers
• Portable Mini-disc players
Hereby, Philips Consumer Electronics, BG P&A,
declares that this FM transmitter is in compliance with
the essential requirements and other relevant provisions
of Directive 1999/5/EC.
Note: audio input limiting threshold is maximum
180 mVSS
Technical Support
Email: accessorysupport@philips.com
Warranty
http://www.philips.com/guarantee