2. Computers & electronics
  3. Audio & home theatre
  4. Home audio sets
  5. Philips
  6. MCM149/98
MCM149/98

Philips MCM149/98 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Philips MCM149/98 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What's included in the box?
    How do I connect the speakers?
    How do I set the clock?
    How do I play a CD?
    How do I program and tune to radio stations?
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MCM149
1
Quick Start Guide
2
User Manual
Quick Start Guide
User manual
ALB/
PRESET
3
1
2
Remote Control
MCM149_QSG_Eng 2007.8.22, 2:29 PM1
1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:
It is unnecessary to connect the FM pigtail antenna since it
is fixed to the main unit.
speaker
(right)
speaker
(left)
AC power cord
FM wire antenna
2
1
MCM149_QSG_Eng 2007.8.22, 2:29 PM2
5
1
2
3
4
Setting the clock
In standby mode, press and hold CLOCK/DISPLAY on the
remote control set for 2 seconds.
Press PROG to select 12-hour or 24-hour display.
Press CLOCK/DISPLAY to confirm.
➜ The clock digits for the hours flash.
Press TUNING 4 ¢ (à / á on the remote control)
to set the hours.
Press CLOCK/DISPLAY again.
➜ The clock digits for the minutes flash.
Press TUNING 4 ¢ (à / á on the remote control)
to set the minutes.
Press CLOCK/DISPLAY to confirm the time.
6
7
PROG.
ALB/
CLOCK/DISPLAY
PRESET
CLOCK/DISPLAY
PROG.
Enjoy
1
2
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press down
on PULL TO OPEN to close the CD door.
PressÉÅto start playback.
Press 9 to stop playback.
PROG.
ALB/
CLOCK/DISPLAY
PRESET
MCM149_QSG_Eng 2007.8.22, 2:29 PM3
2007 C Koninklijie Philips Electronics
N.V. All rights reserved.
http://www.philips.com
PDCC-JH-0731
Tip:
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
1
2
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stations
in order of waveband.
Press ALBUM/PRESET +/- until the desired preset station is displayed
Programming and tuning to radio stations
3
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or AUX,
for example).
– Then select the desired function ( 2;,
í, ë for example).
Enjoy
MCM149_QSG_Eng 2007.8.22, 2:29 PM4
/