KFI Products SE45-R2 User manual

WINCH LEAD ROTATION

1. Removebolts(A)onmotorendcapasshownin

Figure1&2.

“Figure 1”

“Figure 4”

“Figure 2”

2. Removemotorendcap(B)androtate90degrees.

Makesurethatthebrushes(C)areseatedproperly

beforreinstallingendcap.

 Note: On some winches you many need to rotate

the motor housing (D) as the magnets are not

always spaced the same.

3. Reinstallbolts(A)andtightendown.

“Figure 3” Threaded Rotation Holes