Husky HD00146-TH, HD00144, HD00145, HD00146 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Husky HD00146-TH Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
2
3
4
Remove D-Rings on outside of belt
*Note, one side is attached, cut light
gray binding with scissors
Remove all pouches and pull webbing
belt through padded belt loops
Move adjustment buckle away from
grommets to make belt LARGER
Move adjustment buckle towards
grommets to make belt SMALLER
5
6
7
8
Check the sizing, make
sure it is not too tight or
too loose
Starting on one side of the padded belt,
slip webbing belt through first loop
Slide pouches on to webbing belt in the
position of your choosing
Slide webbing belt through the middle
padded belt loop and continue arranging
pouches as desired
8
9
10
Replace D-Rings on outside of belt
Starting with middle D-Ring, match
each suspender strap clip with
corresponding D-Ring
1
2
3
/