Livex Lighting 50765-91 Operating instructions

Brand: Livex Lighting

Model: 50765-91

Type: Operating instructions

This manual is also suitable for

50765-92

Livex Lighting 50765-91 is a versatile lighting fixture that combines style and functionality. This chandelier-style fixture can be customized to suit your needs, allowing you to adjust the hanging height and add or remove crystals for a more personalized touch. The fixture's durable construction and easy installation make it a great choice for both residential and commercial settings. With its elegant design and warm, inviting light, the Livex Lighting 50765-91 adds a touch of sophistication to any space.

ASSEMBLING & INSTALLATION INSTRUCTIONS PRODUCT# 50764 50765

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER .

Fig.1

ASSEMBLING THE FIXTURE (Fig.2).

1. Attach the pipe(F) to the center coupling of fixture body (H), by

turning it clockwise until tight. Slide the art frame(D), steel shim(C)

and pipe(B) through the pipe(F), lock them securely with the

loop(A).

2. Put the cover(G) onto the lamp holder.

3. Attach the lobation crystal(E) to the side small ring of the arms.

Attach the cluster crystal(I) to the bottom small ring of the ball.

4. Install the light bulbs in accordance with the fixture specifications

NOTE: DO NOT EXCEED THE SPECIFIED WATTAGE!

HANGING THE FIXTURE (Fig.1)

1. Shut off the power at the circuit breaker and remove old fixture

from ceiling, including the old single bar.

2. Carefully unpack new fixture and lay all the parts on a clear

surface.

3. Thread nipple (C) into loop (F) until snug.

4. Thread other end of nipple (C) with loop attached into single bar

(D) until snug.

5. Place lock washer (B) over end of nipple protruding through single

bar and thread hex nut (A) onto nipple until tight.

6. Take this single bar assembly and mount to ceiling junction box

with junction box screws (E). Tighten screws securely with

screwdriver. The junction box is not included.

7. Using proper chain pliers to open one end link of the chain

provided and connect to the fixture loop (I). Close the link.

8. By measuring, determine correct number of links needed for

proper hanging height. Using proper chain pliers disconnect and

discard remaining chain.

9. Lace the fixture wires through the chain.

10. Slip loop collar (H) over the chain, then do the same with the

canopy (G).

11. Open the other end link of the chain and hang the fixture on the

loop at the ceiling. Close the link.

12. Feed the fixture wires through the loop (F) and nipple (C) and pull

until taut.

13. Slide canopy (G) up flush to ceiling, secure using loop (H).

CONNECTING THE WIRES (Fig.3)

1. Take the black wire from the ceiling junction box and the smooth

wire leg from the fixture and twist bare ends together. Twist wire

connector onto end of wire until snug.

2. Repeat same process with white junction box wire and ribbed wire

leg of fixture wire. NOTE: Twist wires together in the same

direction you twist the wire connector onto wires.

3. If your junction box has a grounding wire (green or bare copper),

attach this wire and the bare copper wire from the fixture together

as step 1.If junction box has no ground wire, attach the bare copper

fixture wire to the green ground screw on the single bar.

4. Tuck these wire connections neatly into the ceiling outlet box and

then raise the canopy (G) all the way to the ceiling. Raise the loop

(H) and thread onto ceiling loop protruding through canopy.

Your installation is now complete. Return power to the

junction box and test the fixture.

Fig.2

Fig.3

DOC2015042750764

White or

HOUSE

Black

WIRES

(Hot)

Smooth

FIXTURE

WIRES

Black or

Ribbed

WIRES

FIXTURE

Bare Copper(Ground)

FIXTURE

WIRES

Copper

(Ground)

HOUSE

(Neutral)

WIRES

White

Bare

Green or

WIRES

HOUSE

Livex Lighting 50765-91 Operating instructions

Brand: Livex Lighting

Model: 50765-91

Type: Operating instructions

This manual is also suitable for

50765-92

Download PDF

report

Livex Lighting 50765-91 Operating instructions

This manual is also suitable for

Livex Lighting 50765-91 Operating instructions

Related papers

Other documents