8.00
203
1.26
31.98
PULL ASSY
MOUNTING
SCREW (4X)
Step 1:
Determine your desired location for installation and make a mark for the location.Make 4 marks where mounting screws will
be placed as shown below. Drill hole at each of the marks.
Drill holes for the desired location.
Pull Mounting
Step 2:
Mount Pull to desired location through screws provided.
402G
INSTALLATION INSTRUCTIONS
No portion of this document or any artwork contained herein should reproduced in any way without the written conset of ALLIED BRASS INC.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI