MSI A88XM GAMING Owner's manual

A88XM GAMING

Motherboard

G52-79031X2

Preface

ii

Preface

Copyright Notice

The material in this document is the intellectual property of MICRO-STAR

INTERNATIONAL. We take every care in the preparation of this document, but no

guarantee is given as to the correctness of its contents. Our products are under

continual improvement and we reserve the right to make changes without notice.

Trademarks

All trademarks in this manual are properties of their respective owners.

󰆻 MSI

®

is registered trademark of Micro-Star Int’l Co.,Ltd.

󰆻 NVIDIA

®

is registered trademark of NVIDIA Corporation.

󰆻 ATI

®

is registered trademark of AMD Corporation.

󰆻 AMD

®

is registered trademarks of AMD Corporation.

󰆻 Intel

®

is registered trademarks of Intel Corporation.

󰆻 Windows

®

is registered trademarks of Microsoft Corporation.

󰆻 AMI

®

is registered trademark of American Megatrends Inc.

󰆻 Award

®

is a registered trademark of Phoenix Technologies Ltd.

󰆻 Sound Blaster

®

is registered trademark of Creative Technology Ltd.

󰆻 Realtek

®

is registered trademark of Realtek Semiconductor Corporation.

󰆻 JMicron

®

is registered trademark of JMicron Technology Corporation.

󰆻 Netware

®

is registered trademark of Novell, Inc.

󰆻 Lucid

®

is trademark of LucidLogix Technologies, Ltd.

󰆻 VIA

®

is registered trademark of VIA Technologies, Inc.

󰆻 ASMedia

®

is registered trademark of ASMedia Technology Inc.

󰆻 iPad, iPhone, and iPod are trademarks of Apple Inc.

󰆻 Qualcomm Atheros and Killer are trademarks of Qualcomm Atheros Inc.

Revision History

Revision Revision History Date

V1.0 First release 2014/ 02

Preface

iii

Preface

Smartphone Application

MSI

+

is a smart web gadget that works as a shopping navigator and

provides specs comparison for IT buyers. With a simple tap of the



variety of choices and, if product details are required, you may easily

download user manuals within minutes. Better yet, the power calculator

provides accurate estimates of power unit capacity for DIY users.

Technical Support

If a problem arises with your system and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor. Alternatively,

please try the following help resources for further guidance.

Visit the MSI website for technical guide, BIOS

updates, driver updates, and other information:

http://www.msi.com/service/download/



http://register.msi.com/

iv

Preface

Safety Instructions

󰆻 Always read the safety instructions carefully.

󰆻 Keep this User’s Manual for future reference.

󰆻 Keep this equipment away from humidity.

󰆻 

󰆻 The openings on the enclosure are for air convection hence protects the equipment

from overheating. DO NOT COVER THE OPENINGS.

󰆻 Make sure the voltage of the power source is at 110/220V before connecting the

equipment to the power inlet.

󰆻 Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

󰆻 Always Unplug the Power Cord before inserting any add-on card or module.

󰆻 All cautions and warnings on the equipment should be noted.

󰆻 Never pour any liquid into the opening that can cause damage or cause electrical

shock.

󰆻 If any of the following situations arises, get the equipment checked by service

personnel:

 The power cord or plug is damaged.

 Liquid has penetrated into the equipment.

 The equipment has been exposed to moisture.

 The equipment does not work well or you can not get it work according to

User’s Manual.

 The equipment has been dropped and damaged.

 The equipment has obvious sign of breakage.

󰆻 DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60

o

C (140

o

F),

IT MAY DAMAGE THE EQUIPMENT.

Preface

v

Preface

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device is

in compliance with the essential safety requirements and other relevant

provisions set out in the European Directive.

FCC-B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to



and on, the user is encouraged to try to correct the interference by one or more of the

measures listed below.

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 

the receiver is connected.

 Consult the dealer or an experienced radio/television technician for help.

Notice 1



compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and A.C. power cord, if any, must be used in order to comply

with the emission limits.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that may

cause undesired operation.

Micro-Star International

MS-7903

vi

Preface

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment and its antenna should be installed and

operated with minimum distance 20 cm between the radiator and your body. This

equipment and its antenna must not be co-located or operating in conjunction with any

other antenna or transmitter.

European Community Compliance Statement

The equipment complies with the RF Exposure Requirement 1999/519/EC, Council

Recommendation of 12 July 1999 on the limitation of exposure of the general public



Directive.

Taiwan Wireless Statements

󲪱󳝪󴎽󰨩󴓶󰷚󳨂󱾞

󳜣󱄛󱢟󴐝󴓙󰶘󲇌󰟛󰣞󰰯󲴗󱖔󵇋󵂋󲏯󰃩󵃮󳜣󴏁󰵿󰃩󰫼󰶈󰻖󳿯󱮦󰤏󲺸󳦕󱃗󰞝󱤧󱹕󳭺󴔚󲂄󵇋

󲴗󰰰󱊷󰰯󲴗󱮦󴔚󲂄󰴯󴎽󴎘󰟛󲰉󱦷󰵚󰰯󳪍

󰣞󰰯󲴗󱖔󵇋󵂋󲏯󰟛󰤏󲺸󰞝󱤧󱤁󵆏󵉫󳮺󱔙󰫸󰵚󱠂󱺎󰶘󲙥󴦪󰥱󰃸󳜣󳀌󲶎󲂙󱠂󱺎󲶎󴗱󱿒󰃩󱭙󳑛

󰴃󰧬󲺸󰃩󰞶󱻉󰼔󳮃󲪱󱠂󱺎󱿒󱽉󱤧󳠌󳠜󰤏󲺸󰯝󵆕󰶘󲙥󴦪󰥱󰃩󱲗󰤭󵂋󰥱󲙥󴌟󱔪󰣬󲋽󰟛󲪱󳝪

󵂋󴦪󰥱󰣞󰰯󲴗󱖔󵇋󵂋󲏯󵆘󱥝󰵧󰶘󲙥󴦪󰥱󱮦󱝵󲋽󳍡󱔈󰵚󴬻󲿒󲺸󵂋󲙲󴣋󱖔󱦷󵂋󲏯󴎽󰨩󰟛

󱠂󱺎

󶛤󰷚󰤏󲺸󳦕󶝳󱾿󲻂󵱿󴙗󶙝󲺲󰹑󰃩󱂸󱗕󰣟󳀔󶈋󵷣󰞽󰤏󲺸󱿒󰃩󰵿󶑌󲂓󶝸󱮠󶆣󶎩󵂋󱠂󱺎󰃩󱂸

󶝳󳎾󱩕󲙑󰞛󰃩󰤏󲺸󳦕󲂓󶘘󴌑󲗒󵾞󰵦󲅠󰠫󶞜󲼆󳀔󱖝󳓦

Japan VCCI Class B Statement

󱩕󱇁󱰐󴇣󴉕󳣾

󴉕󳣾󱩕󱇁󱰐󴇣󴉕󳣾󳓙󵂋󲙲󵀬󱕃󳭺󰟋󴌟󰯆󰳤󴔀󰢪󰃥󰃦󱆊󲠦󱆊

󱩕󱇁󱰐󴇣󴉕󳣾󴉕󳣾󱕆󱠽󰬕󰵧󰥱󲏯󴥡󱴵

󰤏󰵧󰥱󵀬󱕃󱢥󴜇󰵦󱰁󴐼󱾞󲂈󲓳

󰵦󱰁

Korea Warning Statements

󸎯󺘪󸯪󹇖󹇚󸻺󸍊󹝪󹝟󹧇󹢺󺏂󺛲󹎖󷲶󸍛󹇧󹠪󹠾󹠂

Preface

vii

Preface

California, USA:

The button cell battery may contain perchlorate material and requires

special handling when recycled or disposed of in California.

For further information please visit:



Taiwan:

For better environmental protection, waste batteries should be collected

separately for recycling or special disposal.

󵻨󵂋󲗰󶚫󱁮󵿤

European Union:

Batteries, battery packs, and accumulators should not be disposed of

as unsorted household waste. Please use the public collection system

to return, recycle, or treat them in compliance with the local regulations.

Battery Information

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

http://www.msi.com/html/popup/csr/evmtprtt_pcm.html

CAUTION: There is a risk of explosion, if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer.

viii

Preface

WEEE (Waste Electrical and Electronic Equipment) Statement

ENGLISH

To protect the global environment and as an environmentalist, MSI must

remind you that...

Under the European Union (“EU”) Directive on Waste Electrical and



13, 2005, products of “electrical and electronic equipment” cannot be

discarded as municipal wastes anymore, and manufacturers of covered

electronic equipment will be obligated to take back such products at the end of their

useful life. MSI will comply with the product take back requirements at the end of life

of MSI-branded products that are sold into the EU. You can return these products to

local collection points.

DEUTSCH



Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen

Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.

MSI hat europaweit verschiedene Sammel- und Recyclingunternehmen beauftragt,

die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines



Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.

FRANÇAIS



Au sujet de la directive européenne (EU) relative aux déchets des équipement



que les produits électriques et électroniques ne peuvent être déposés dans les









les points de collecte.



























Page is loading ...

Thank you for choosing the A88XM GAMING Series (MS-7903 v1.X) M-ATX

motherboard. The A88XM GAMING Series motherboards are based on AMD

®

A88X 

AMD

®

FM2+/ FM2 processor, the A88XM GAMING Series motherboards

deliver a high performance and professional desktop platform solution.

English

En-2



CPU

Support

 AMD Socket FM2+/ FM2 A-Series/Athlon™ Processors

Chipset  AMD A88X

Memory

Support

 4x DDR3 memory slots supporting up to 64GB

 

 Dual channel memory architecture

 

 

 

Expansion

Slots

 2x PCIe x16 slots

- PCI_E1 supports up to PCIe 3.0 x16 speed*

- PCI_E4 supports up to PCIe 3.0 x8 speed*

 2x PCIe 2.0 x1 slots

* Only FM2+ processors can support PCIe 3.0

Graphics  1x VGA port, supporting a maximum resolution of 1920x1200 @



 1x DVI-D port, supporting the maximum resolutions of



 1x HDMI port, supporting the maximum resolutions of





 1x DisplayPort, supporting a maximum resolution of

4096x2160@24HZ, 24bpp**

* Only support when using an FM2+ APU.

** The DisplayPort does not support "Hot-plug".

Multi-GPU

Support

 Supports 2-Way AMD

®

CrossFire

TM

Technology*

* Supports Windows 7 and Windows 8.

Storage  AMD

®

A88X Chipset

- 8x SATA 6Gb/s ports

- Supports RAID 0, RAID1, RAID5 and RAID 10

USB  AMD

®

A88X Chipset

- 4x USB 3.0 ports (2 ports on the back panel, 2 ports available

through the internal USB connectors)

- 8x USB 2.0 ports (2 ports on the back panel, 6 ports available

through the internal USB connectors)

 VIA VL806 Chipset

- 2x USB 3.0 ports on the back panel*

* These USB 3.0 ports do not support M-Flash recovery function.

Audio  Realtek

®

ALC1150 Codec

- 

- Supports S/PDIF output

LAN  Killer E2205 Gigabit LAN controller*

- 1x LAN port on the backpanel

* The Killer Network Manager is only available for Windows 7 and Windows 8 currently. The

supported drivers for other operating systems would be available on the website if provided

by vendor.

English

En-3

Back Panel

Connectors

 1x PS/2 keyboard/ mouse combo port

 2x USB 2.0 ports

 4x USB 3.0 ports

 1x VGA port

 1x DVI-D port

 1x HDMI port

 1x DisplayPort

 1x Optical S/PDIF-Out connector

 1x LAN (RJ45) port

 6x OFC audio jacks

Internal

Connectors

 1x 24-pin ATX main power connector

 1x 8-pin ATX 12V power connector

 8x SATA 6Gb/s connectors

 3x USB 2.0 connectors (supports additional 6 USB 2.0 ports)

 1x USB 3.0 connector (supports additional 2 USB 3.0 ports)

 1x 4-pin CPU fan connector

 2x 4-pin system fan connectors

 1x Front panel audio connector

 2x System panel connectors

 1x Chassis Intrusion connector

 1x TPM module connector

 1x Serial port connector

 1x Clear CMOS jumper

 1x OC Genie button

 1x Power button

 1x Reset button

 1x OC Genie mode switch

 1x Slow mode booting switch

I/O

Controller

 Fintek 71878 Controller Chip

Hardware

Monitor

 CPU/System temperature detection

 CPU/System fan speed detection

 CPU/System fan speed control

BIOS

Features

 

 UEFI AMI BIOS

 ACPI 5.0, PnP 1.0a, SM BIOS 2.7, DMI 2.0

 Multi-language

Special

Features

 Military Class 4

 Military Class Essentials

 OC Genie 4

 Click BIOS 4

 AMD CrossFire

 AMD Dual Graphics

 4K UHD Support

 4 Display Outputs

 PCI Express Gen 3

 USB 3.0

 SATA 6Gb/s

 Command Center

 Fast Boot

 Live Update 5

 M-Flash

English

En-4

Software  Drivers

 MSI

- Command Center

- Super Charger

- Live Update 5

- Fast Boot

 7-ZIP

 Sound Blaster Cinema

 Killer Network Manager

 Norton Internet Security Solution

 Trend Micro SafeSync

Form

Factor

 M-ATX Form Factor

 9.6 in. x 9.6 in. (24.4 cm x 24.4 cm)

For the latest information about CPU, please visit

http://www.msi.com/service/cpu-support/

For more information on compatible components, please visit

http://www.msi.com/service/test-report/

Page is loading ...

English

En-6

Connectors Reference Guide

Port Name Port Type Page

APU FM2+/ FM2 Socket En-9

Back Panel I/O Ports En-7

CPUFAN,SYSFAN1~2 Fan Power Connectors En-18

JAUD1 Front Panel Audio Connector En-22

JBAT1 Clear CMOS Jumper En-23

JCI1 Chassis Intrusion Connector En-21

JCOM1 Serial Port Connector En-22

JFP1, JFP2 System Panel Connectors En-19

JPWR1~2 ATX Power Connectors En-14

JTPM1 TPM Module Connector En-21

󰄻  

JUSB4 USB 3.0 Expansion Connector En-20

OC_SW1 OC Genie Mode Switch En-26

OC1 OC Genie Button En-24

PCI_E1~4 PCIe Expansion Slots En-15

POWER1 Power Button En-25

RESET1 Reset Button En-25

SATA1~8 SATA Connectors En-17

SLOW_1 Slow Mode Booting Switch En-26

English

En-7

Back Panel Quick Guide

PS/2 Keyboard/ Mouse combo Port

The PS/2

®

keyboard/ mouse DIN connector for PS/2

®

keyboard/ mouse.

USB 3.0 Port

USB 3.0 port is backward-compatible with USB 2.0 devices. It supports data transfer

rate up to 5 Gbit/s (SuperSpeed).

Important

In order to use USB 3.0 devices, you must connect to a USB 3.0 port. If a USB cable

is used, it must be USB 3.0 compliant.

USB 2.0 Port

The USB 2.0 port is for attaching USB 2.0 devices such as keyboard, mouse, or other

USB 2.0-compatible devices.

VGA Port

The DB15-pin female connector is provided for monitor.

DVI-D Port

The DVI-D (Digital Visual Interface- Digital) connector can be connected to a LCD

monitor, or a CRT monitor with an adapter. To connect a monitor, please refer to the

monitor’s manual for more information.

HDMI Port

®



that is capable of transmitting uncompressed streams. HDMI supports all types of TV



digital audio on a single cable.

DisplayPort

DisplayPort is a digital display interface standard. This connector is used to connect a

monitor with DisplayPort inputs.

Important

The DisplayPort does not support "Hot-plug". Therefore, please make sure that the



Line-In

Line-Out

MicUSB 3.0 Port

LAN Port

PS/2 Keyboard/

Mouse combo Port

USB 2.0 Port

HDMI Port

VGA Port

DVI-D Port

USB 3.0 Port

DisplayPort

RS-Out

CS-Out

SS-Out

Optical

S/PDIF-Out

English

En-8

Important

This platform supports dual-display and triple-display function.

VGA + DVI-D /

VGA + HDMI /

DVI-D + HDMI /

DVI-D + DisplayPort /

HDMI + DisplayPort

VGA + DVI-D + HDMI /

DVI-D + HDMI + DisplayPort

Extend mode

(Extend the desktop to the second

and third monitor)

 

Clone mode

(Monitors have the same screen)

 

Optical S/PDIF-Out





LAN Port

The standard RJ-45 LAN jack is for connecting to a Local Area Network (LAN).

LINK/ACT

LED

SPEED

LED

LED LED Status Description

Link/ Activity LED

 No link

Yellow Linked

Blinking Data activity

Speed LED

 10 Mbps connection

Green 100 Mbps connection

Orange 1 Gbps connection

Audio Ports

These connectors are used for audio devices. The color of the jack refers to the

function of the connector.

 Blue-Line in: Used for connecting external audio outputting devices.

 Green- Line out: Used as a connector for speakers or headphone.

 Pink- Mic: Used as a connector for a microphone.

 Black- RS-Out: Rear surround sound line out in 4/ 5.1/ 7.1 channel mode.

 Orange- CS-Out: Center/ subwoofer line out in 5.1/ 7.1 channel mode.

 Gray- SS-Out: Side surround sound line out in 7.1 channel mode.

English

En-9

Important

Overheating

Overheating can seriously damage the APU and motherboard. Always make sure the

cooling fans work properly to protect the APU from overheating. Be sure to apply an

even layer of thermal paste (or thermal tape) between the APU and the heatsink to

enhance heat dissipation.

Replacing the APU



power supply’s power cord to ensure the safety of the APU.

Overclocking

This motherboard is designed to support overclocking. Before attempting to overclock,

please make sure that all other system components can tolerate overclocking. Any



guarantee the damages or risks caused by inadequate operation beyond product



Golden triangle is the Pin 1 indicator

Introduction to FM2/ FM2+ APU

The surface of the FM2/ FM2+ APU has a golden triangle to assist in correctly

lining up the APU for motherboard placement. The golden triangle is the Pin 1

indicator.

APU (Accelerated Processing Units)

English

En-10



When you are installing the APU, make sure the APU has a cooler attached on the top

to prevent overheating. Meanwhile, do not forget to apply some thermal paste on APU

before installing the heat sink/cooler fan for better heat dispersion.





1. Pull the lever sideways away from the socket. Make sure to raise the lever up to a

90-degree angle.

2. Look for the gold arrow of the APU. The gold arrow should point as shown in the

 

3. If the APU is correctly installed, the pins should be completely embedded into

the socket and can not be seen. Please note that any violation of the correct

installation procedures may cause permanent damages to your motherboard.

 

likely to move while the lever is being closed, always close the lever with your



completely embedded into the socket.

English

En-11

5. Locate the APU fan connector on the motherboard.

6. Position the cooling set onto the retention mechanism. Hook one end of the clip to



Important













your system.



Please refer to the documentation in the APU cooler package for more details about

APU cooler installation.

APU fan connector

7. Then press down the other end of the clip to fasten the cooling set on the top of

the retention mechanism. Locate the Fix Lever and lift up it.

8. Fasten down the lever.

9. Attach the APU Fan cable to the APU fan connector on the motherboard.

English

En-12

Memory

These DIMM slots are used for installing memory modules. For more information on

compatible components, please visit http://www.msi.com/service/test-report/

DIMM1

DIMM2

DIMM3

DIMM4

Video Demonstration

Watch the video to learn how to install memories at the address below.

http://youtu.be/76yLtJaKlCQ

Dual-Channel mode Population Rule

In Dual-Channel mode, the memory modules can transmit and receive data with two

data bus channels simultaneously. Enabling Dual-Channel mode can enhance system

performance. The following illustrations explain the population rules for Dual-Channel

mode.

DIMM2

DIMM4

DIMM1

DIMM2

DIMM3

DIMM4

Important



DDR3 memory modules are not interchangeable with DDR2, and the DDR3

standard is not backward compatible. Always install DDR3 memory modules in

DDR3 DIMM slots.



To ensure system stability, memory modules must be of the same type and density

in Dual-Channel mode.



Due to chipset resource usage, the system will only detect up to 63+ GB of memory

(not full 64GB) when all DIMM slots have 16GB memory modules installed.

English

En-13

Mounting Screw Holes



for an motherboard on the mounting plate in your computer case. If there is an

I/O back plate that came with the computer case, please replace it with the I/O

backplate that came with the motherboard package. The I/O backplate should snap

easily into the computer case without the need for any screws. Align the mounting

plate’s mounting stands with the screw holes on the motherboard and secure the

motherboard with the screws provided with your computer case. The locations of the

screw holes on the motherboard are shown below. For more information, please refer

to the manual that came with the computer case.

Important







To prevent damage to the motherboard, any contact between the motherboard

circuitry and the computer case, except for the mounting stands, is prohibited.



Please make sure there are no loose metal components on the motherboard or

within the computer case that may cause a short circuit of the motherboard.

The I/O ports should be facing

toward the rear of the computer

case. They should line up with the

holes on the I/O backplate.

Page is loading ...

MSI A88XM GAMING, MS-7903 1.0 Owner's manual

Related papers

Other documents