DCS CAD1-SK Reference guide

Hello! I've reviewed the Quick Reference Guide for the DCS CAD1-SK Side Shelf. This document provides details on the 24-inch stainless steel shelf designed for CAD model carts, including its dimensions, material, and the option for a Brazilian Cherry wood insert. I'm ready to answer your questions about this product.
What is the material of the side shelf?

What are the dimensions of the side shelf?

Is there an extra outdoor touch available?

QUICK REFERENCE GUIDE > CAD1-SK Date: 28.04.2023 > 1

Side Shelf for CAD Carts

Stainless Steel

Attached to your "CAD" model cart, these 24" side shelves offer a

sturdy expanse of workspace. For an extra outdoor touch be sure

and purchase the CAD-WCB, Brazilian Cherry wood insert for

each CAD-SK.

Side Shelf for CAD Carts

DIMENSIONS

Height 23 7/16

Width 24

Depth 2

SPECIFICATIONS

Finish

Material 304 grade stainless steel

Product dimensions

Depth 2

Height 23 7/16

Width 24

Warranty

Parts and labor 2 years

SKU 71189

The product dimensions and specifications in this page apply to the specific product

and model. Under our policy of continuous improvement, these dimensions and

specifications may change at any time. You should therefore check with Fisher &

Paykel's Customer Care Centre to ensure this page correctly describes the model

currently available. ? DCS by Fisher & Paykel Appliances Limited 2020

Other product downloads available at dcsappliances.com

Service and Warranty

Installation Guide

A PEACE OF MIND SALE

24 Hours 7 Days a Week Customer Support

T 1.888.936.7872 Wwww.dcsappliances.com