2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Toro
  6. Handlebar Extension Kit, e-HoverPro 450 or 550 60V Mower

Toro Handlebar Extension Kit, e-HoverPro 450 or 550 60V Mower Installation guide

  • Hello! I've reviewed the installation instructions for the Toro Handlebar Extension Kit 02630. This document provides detailed steps for installing the extension, replacing cables, and ensuring the safety features function correctly. I'm here to assist with any questions you might have regarding the installation process or the components involved.
  • What should I do before starting the installation?
    What should I do with removed parts?
    What should I check after installation?
FormNo.3462-948RevA
HandlebarExtensionKit
eHoverPro™450or55060VMower
ModelNo.02630
InstallationInstructions
Installation
MediaandAdditionalParts
DescriptionQty.Use
Handlebarextension1
Operator-presencecontrolcable1
Handwheelknobs2
U-bolt2
Electric-startwireextender1
Cabletie3
Installthehandlebarextensionkit.
Note:Retainallremovedpartsforlaterinstallation
unlessotherwiseindicated.
1.Shutoffthemachine,removetheelectric-start
button,waitforallmovementtostop,andallow
themachinetocool.
2.Removetheoperator-presencecontrolcable
fromthehandlebar(Figure1).
g435604
Figure1
1.Bolt(M6x1-1/6inches)4.Washer
2.Upperhandlebar5.Locknut(1/4inch)
3.Handlebartting
3.Disconnecttheremovedcablefromthe
operator-presencebailbracketbyanglingthe
cablettingfree(Figure2).
g435607
Figure2
1.Operator-presencebail
bracket
2.Cabletting
4.Removetheotherendoftheremovedcable
fromthemotor.
Important:Notehowthecableisconnected
tothemotor;thenewcableisinstalledinthe
sameway.
5.Removethe2handwheelknobs,washers,and
U-boltsthatsecuretheupperhandlebartothe
lowerhandlebar(Figure3).
©2023—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUK.
AllRightsReserved*3462-948*
g435610
Figure3
1.Lowerhandlebar4.Upperhandlebar
2.Handwheelknob5.U-bolt
3.Washer
6.Securethehandlebarextensiontothelower
handlebarusingthe2handwheelsand2U-bolts
provided(Figure4).
g435603
Figure4
1.Operator-presencecontrol
cable
3.U-bolt
2.Handwheel4.Handlebarextension
7.Usingthe2handwheelsand2U-boltsyou
removedinstep5,securetheupperhandlebar
tothehandlebarextension(Figure3).
8.Usingthemountingfastenersyouremoved
instep2,securetheprovidedlonger
operator-presencecontrolcabletotheupper
handlebar(Figure1).
9.Connectthenewlyinstalledcabletothe
operator-presencebailbracketasshownin
Figure2.
10.Hooktheloosecablettingonthenewcable
intotheblade-controllever,thenpullthe
blade-controlcabletautandslideitintothe
bracketasshowninFigure5.
g435627
Figure5
1.Bracket3.Loosecabletting
2.Blade-controllever4.Blade-controlcable
2
11.Unplugtheelectric-startconnectorfromthefront
ofthemachine.
g435825
Figure6
1.Electric-startconnector
12.Attachtheelectric-startwireextendertothe
electric-startconnector(Figure7)andplugitinto
thefrontofthemachineasshowninFigure6.
g435829
Figure7
1.Wireextender2.Electric-startconnector
13.Usingthesuppliedcableties,securethecables
tothehandlebarupperandlowersections.
14.Startthemachineandensurethatthe
operator-presencebailshutsoffthemachine
whenitisreleased;refertotheeHoverPro
Operator’sManual.
Important:Whenyoureleasethe
operator-presencebail,boththemotor
andthecuttingdiscshouldstopwithin3
seconds.Iftheydonotstopproperly,stop
usingyourmachineimmediatelyandcontact
anAuthorizedServiceDealerorauthorized
Torodistributor.
Note:Usecarewhenmaneuveringthe
machine;thelongerhandlemaymake
maneuveringmoredifcult.
Becarefulwhenmovingorstoringtheunitto
preventthelatchingmechanismfrombreaking.
3
/