2. Potter
  3. PSB-10 Bulk Power Supply

Potter PSB-10 Bulk Power Supply Owner's manual

  • Hello! I've reviewed the datasheet for the Potter PSB-10 Bulk Power Supply. This device offers features such as a 10 Amp output, a supervised battery charger, and support for 7–55 Amp hour batteries. It also includes integrated battery cut-off circuitry and diagnostic LEDs. I'm ready to answer any questions you may have about its technical specifications or functionalities.
  • What is the output voltage?
    What is the current draw?
    What is the total system current?
8830078-REV A • 2/16 PAGE 1 OF 2
Potter Electric Signal Company, LLC • St. Louis, MO • Tech Support: 866-956-1211 / Customer Service: 866-572-3005 • www.pottersignal.com
PSB-10
Bulk Power Supply
Description
The Potter PSB-10 Bulk power supply provides continuous 24VDC
power. The PSB supply features an efcient switch mode power supply
design which is up to 50% more efcient than linear mode supplies.
The PSB is used in applications where up to 10 Amps continuous
power is required. Backup power is provided via batteries which can
range in size from 7 – 55 Amp hour (18Ahr batteries can t inside the
cabinet; larger batteries require a battery cabinet.)
Battery integrity is monitored via the built in charger which features
a low battery cut-off circuit to protect against damage to the batteries
during deep discharge.
Technical Specications
Input Voltage 120/240 VAC (Jumper selected) 50-60HZ
Current Draw 5.1 Amps @ 120VAC or 2.5 Amps @ 240 VAC
24VDC Battery
Power .60A Standy, 200 mA Alarm* No external load
Output Voltage 20.4VDC – 27.3 VDC
Total System
Current 10 Amps
BackBox
Dimensions 16 1/8” W x 16 3/4” H x 3 1/2” D
Enclosure Color Red – Standard
Features
• 10 Amp output
• Supervised battery charger: 27.3VDC @ 1Amp
• Supports 7 – 55 Amp hour Batteries
• Integrated battery cut-off circuitry to protect batteries from deep
discharge
• Easy to install cabinet with leveling mounts & key lock
• Two Trouble relays (5A at 30VDC)
• General system trouble (programmable for AC delay)
• Low AC trouble with optional delay settings
• Diagnostic LED’s
• Earth Fault (Amber)
• AC (Green)
• Battery Fault (Amber)
• Product includes a 5 year warranty
7315-0328:0189 S2930
firealarmresources.com
8830078-REV A • 2/16 PAGE 2 OF 2
Potter Electric Signal Company, LLC • St. Louis, MO • Tech Support: 866-956-1211 / Customer Service: 866-572-3005 • www.pottersignal.com
PSB-10
Bulk Power Supply
Installation
Ordering Information
Model Description Stock Number
PSB-10 Bulk Power Supply 3006435
Fig 1
firealarmresources.com
/