ITEM DESCRIPTION PART NO.
1 Screw Truss Head 1/4“ x 3/4“ Type AB 1514699
2 Screw #8 x 1/2“ Ph Pan Hd Type AB 1500799
3 Handle 2410500
4 Motor Housing Cover 2410603
5 Cord 2580023
6 Foam Insert Cover 2412500
7 Cord Retainer 2411112
8 Switch 8231800
9 Motor Housing 2410713
10 Foam Motor Housing - Inner 1290400
11 Gasket - Upper Motor 2072000
12 Foam Motor Housing - Outer 1290503
13 Motor 1496797
14 Ball Float 0081100
15 Strip Gasket 2071100
16 Lid Latch 8550101
17 Lid Cage & Latch Assembly 8988724
18 Screw Hex Head #10 x 3/4“ Type AB 1503999
19 Cartridge Filter 9030462
20 Filter Retainer 3008000
21 Accessory Caddy 8564202
22 Tank Assembly 1046597
23 Drain Cap 1062020
24 Caster Foot 8565100
25 Caster Retainer 8565600
26 Caster 6773600
27 Flatwasher 0704399
28 Collection Bag 9067362
SC87521-67
STANDARD ACCESSORIES
• 6’ x 21/2” Locking hose
• 2 - 21/2” Extension wands
• 6“ Utility nozzle
Install casters and caddy as follows:
1. With tank cover removed, invert tank so the
bottom is facing up.
2. Insert two caster feet into adjacent slots at
front of tank. Secure with screws.
3. Insert accessory caddy into remaining slots at back
of tank. Secure with screws.
4. Insert casters into caddy and supports by inserting
the caster stems into the holes provided and
applying pressure until you feel the casters are
firmly in place.
Catalog 9254210
(16 Gal.)
• 14“ Floor nozzle
• 14“ Squeegee insert
• 21/2” Crevice tool
Model QL50E-IC