2. ASHLEY HARBOUR COLLECTION
  3. ASH33411A2

ASHLEY HARBOUR COLLECTION ASH33411A2 Operating instructions

  • Hello! I have reviewed the installation guide for the Ashley Harbour light fixtures models ASH33411A, ASH33411A1 and ASH33411A2. This document provides detailed instructions on how to safely install the fixture using different mounting options including portable, rod and wall installations. I'm ready to assist you with any questions regarding the installation process or specific features of these light fixtures.
  • What should I do before beginning installation?
    What type of bulbs should I use?
    What should I do if I am unsure about electrical installation?
SAFETY INFORMATION
INSTALLATION GUIDE FOR ASH33411A, ASH33411A1
and ASH33411A2 Released Date: 2021-04-15
Fixture Body
x 1
CARE AND MAINTENANCE
• Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance email [email protected].
PACKAGE CONTENTS
MOUNTING HARDWARE
A
Shade
x 1
B
Socket Collar
(preassebled on
Fixture Body)
x 1
C
Rod
x 2
D
- 1 -
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
• RISK OF ELECTRIC SHOCK - Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
• RISK OF FIRE - Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
• For your safety, read instructions completely before beginning installation.
• If in doubt about electrical installation, consult a licensed electrician.
• Turn off electricity to fixture before replacing the bulb(s).
TOOLS REQUIRED
Bushing with
Rubber Washer
x 1
E
Outlet Box Screw
x 2
BB
Wire Connector
x 3
AA Wall Anchor
x 2
CC Screw
x 2
DD
Option 1 Portable
INSTALLATION
- 2 -
Wall Outlet
Plug
Insert plug to wall outlet
2
Install Fixture Body
3
Install Shade and Bulb
Install Wall Anchors and Screws
optional 1
optional 2
Wall
Wall
Install one correct bulb referring to fixture markings and/or labels for
maximum wattage.
Recommended Bulb type (not included):
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
1
adjustable
adjustable
adjustable
Option 2 Potable with Rods
INSTALLATION
- 3 -
2
3
Install Rod and Wiring
Optional Rods:
Determine the Rods to be assembled
to the Fixture Body according to the
desired mounting location.
Go to step 1 - step 3 of option 1 protable to
complete the rest installations.
1
Remove Inner Backplate
Supply Wire
Wire Nut
Safty Clip
Pass the Supply
Wire through Safty
Clip before reconnect
Black wire from Fixture Body
Ribbed side of wire from Supply Wire
Smooth side of wire from Supply Wire
White wire from Fixture Body
2
Remove Supply Wire
Supply Wire
4
Reinstall Inner Backplate
INSTALLATION
- 4 -
adjustable
adjustable
adjustable
3
Option 3 Wall Fixture
Your installation is now complete! Restore electricity and save this sheet for future reference.
Green ground screw
4
Black (or red) wire from supply
Ground wire from supply
White from fixture
Black from fixture
Ground wire
from fixture
White wire from supply
Wiring
6
Install Shade and Bulb
Install one correct bulb referring to fixture
markings and/or labels for maximum wattage.
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
2
Remove Supply Wire and install Bushing
Bushing
Rubber
Washer
Supply Wire
5
Install Fixture Body
1
Remove Inner Backplate
Install Inner Backplate
Recommended Bulb type (not included):
/