Fusion CA-AM20650 User manual

  • Hello! I am an AI chatbot trained to assist you with the Fusion CA-AM20650 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AMPLIFIERS
AMPLIFIER SPECIFICATIONS
CA-AM10900 CA-AM20350 CA-AM20650 CA-AM40700 CA-AM41200
PeakPower(Watts) 900 350 650 700 1200
FrequencyResponse 15Hz-185Hz 10Hz-100kHz 10Hz-100kHz 10Hz-100kHz 10Hz-100kHz
Dimensions(mm) 267(l)x230(w)x49(h) 267(l)x230(w)x49(h) 377(l)x230(w)x49(h) 377(l)x230(w)x49(h) 457(l)x230(w)x49(h)
10-1/2x9-1/16x1-15/16”10-1/2x9-1/16x1-15/16”14-27/32x9-1/16x1-15/1614-27/32x9-1/16x1-15/16”18x9-1/16x1-15/16”
PowerRatings 300WRMSx1 55WRMSx2 115WRMSx2 50WRMSx4 110WRMSx4
@4Ω1%THD+N, @4Ω1%THD+N, @4Ω1%THD+N, @4Ω1%THD+N, @4Ω1%THD+N,
480WRMSx1 85WRMSx2 170WRMSx2 80WRMSx4 150WRMSx4
@2Ω1%THD+N @2Ω1%THD+N, @2Ω1%THD+N, @2Ω1%THD+N, @2Ω1%THD+N,
175WRMSx1 340WRMSx1 160WRMSx2 300WRMSx2
@4ΩBridged @4ΩBridged @Bridged @4ΩBridged
1%THD+N 1%THD+N 1%THD+N 1%THD+N
CA-AM10900 CA-AM20350 CA-AM20650 CA-AM40700 CA-AM41200
www.fusionelectronics.com
INSTALLATION GUIDELINES
1. Ensurethe+12Vleadisdisconnectedfromthebatterybeforeyouconnectanynewequipment.
2. Ensurethemountinglocationwillnotinterferewiththegastank,brakelinesorelectricalwiring.
3. EnsuretheAmplierissecurelyfastenedtothevehicletopreventdamageintheeventofanaccident.
4. Ensureallwiringisprotectedtoavoidpinchingorcrushingwhichcouldresultindamagetotheaudiosystem.
5. Ensurethemountinglocationhassufcientairowaroundtheamplier.Iftheamplierismountedinanenclosedspacea
 3”fanwithductingshouldbeusedtoaidinairow.
6. Donotmountanyamplieronasubwooferenclosureasextendedexposuretovibrationmaycausemalfunctionoftheamplier.
7. Ensureyouusetherecommendedgaugewire/cableforallamplierconnections.
WIRING
Ensuretheaudiosystemisturnedoffbeforemakinganyconnections
totheamplier,speakersorsourceunit.
Failure to do so could result in permanent damage to the audio
system.WhenwiringtheFUSIONamplierensurethatthecable
isprotectedfromsharpobjectsandalwaysuserubbergrommets
whenwiringthroughmetalpanels.
Ensure all terminals and connections are protected from the
vehiclechassisandfromeachotherasfailuretodosocouldresult
inpermanentdamagetotheaudiosystem.
POWER
FUSIONampliersshouldbeconnecteddirectlytothe+12Vbattery
terminalwithaninlinefuseorcircuitbreakerasclosetothebattery
aspossible.
GROUND
Whengrounding/earthingyouramplier ensurethatthelocation
isa good sourceofground(preferablythe oorpan). Makesure
themetaliscleanofpaintetcasapoorearthcoulddamageyour
audiosystem.
REMOTE TURN ON
Thisconnectionturnstheamplieronandshouldbeconnectedto
theremoteturnonwirefromtheHeadUnit.Ifoneisnotavailable
aswitched12vsourcemustbeused.Eitherapowerantennawire
orACC+12V.
LOW LEVEL INPUTS
ChoosethecorrectlengthRCAinterconnectsandrunthemtothe
RCAoutputsofthesource/headunit,avoidingrunningbesideother
loomsandorpowercable.
LEVEL CONTROL
Thiscontrolisusedtomatchtheinputleveloftheampliertothe
outputlevelofyouheadunit.Werecommendthefollowingmethod.
1. Turntheamplierleveltozero
2. Turnthevolumeoftheheadunitto¾andthebassandtreble
 tozero
3. Adjustthelevelcontroluntilthedesiredmaximumvolumeis 
 achievedwithoutdistortion.
4. Failuretofollowthesestepsmaycausepermanentdamageto
 theaudiosystem.
PUBLISHEDBYFUSIONELECTRONICSLIMITED:©Copyright2010byFUSIONElectronicsLimited.Allrightsreserved.Specicationsanddesignaresubjecttochangewithoutnotice.
YOUCANHELPPROTECTTHEENVIRONMENT!Pleaseremembertorespectthelocalregulations:Handinthenon-workingelectricalequipmenttoanappropriatewastedisposalcenter.
RECORD YOUR PURCHASE DETAILS HERE:
SERIALNUMBER
DATEOFPURCHASE
AFFIXRECEIPTHERE
WARNING:AudioSystemscanproducesoundlevelsover135dB.Continuousexposuretosoundpressurelevelsover100dBmaycausepermanent
hearingloss!Pleasewatchforemergencyvehiclesaswarningsignalsmaynotbeheard.USECOMMONSENSE!
RECOMMENDED AMPLIFIER INSTALLATION KITS
FUSIONrecommendsthefollowingAmplierInstallationKittobe
usedwithourAmpliers
CA-AM10900 AC-AK04E 4GaugeInstallationKit
CA-AM20350 AC-AK08E 8GaugeInstallationKit
CA-AM20650 AC-AK04E 4GaugeInstallationKit
CA-AM40700 AC-AK04E 4GaugeInstallationKit
CA-AM41200 AC-AK04E 4GaugeInstallationKit
TROUBLE SHOOTING
ProblemPossible ReasonSolution
Ampliernotswitchingon. •No+12Vtopowerwire •Checkfusesandconnectionstobattery
PowerLEDnot‘on’. •Nopowertoremotewire •Checkremoteonconnectionstoheadunit
•Fusebroken •Replacefusewithcorrecttypeandamperage
Ampliernotworking, •Fuseonamplierblown •Replacefusewithcorrecttypeandamperage
butPowerLEDis‘on’ •Ampliertoohot •Moveampliertoventedarea
  •Turnheadunitdown
•Speakerwiresshorted •Checkthattherearenospeakerwiresshorted
  toanotherwireortothevehiclechassis
NoSound •RCASignal •CheckRCAconnectiontoheadunit
•Gaincontrolnotsetup •Ensureyouhavesetuptheampliergainlevelcontrol
•HeadUnit •Checkheadunitvolumelevel
•Amplier •Checkallpower,remoteonandgroundconnections
•Speakers •Checkspeakersforwireshorts
CROSSOVER TABLE
Model Channels Crossover Type Crossover Frequency Bass Boost
CA-AM10900 All Fixed-LPF LPFSelectable-80Hzor180Hz Selectable-0dBor12dB
CA-AM20350 All Selectable-LPF,HPF,orFULL LPFSelectable-80Hzor180Hz Selectable-0dBor12dB
  HPFFixed-80Hz
CA-AM20650 All Selectable-LPF,HPF,orFULL LPFSelectable-80Hzor180Hz Selectable-0dBor12dB
  HPFFixed-80Hz
CA-AM40700 Front Selectable-HPForOFF HPFFixed-80Hz None
Rear Selectable-LPForOFF LPFFixed-180Hz Selectable-0dBor12dB
CA-AM401200 Front Selectable-HPForOFF HPFFixed-80Hz None
Rear Selectable-LPForOFF LPFFixed-180Hz Selectable-0dBor12dB
Forfurtherproductandinstallationinformation,pleasevisitwww.fusionelectronics.com
Pourplusd’informationssurlesproduitsetl’installation,rendez-voussurwww.fusionelectronics.com
Paraobtenermásinformaciónacercadelosproductosydesuinstalación,visiteelsitiowebwww.fusionelectronics.com
Bezoekwww.fusionelectronics.comvoormeerproduct-eninstallatie-informatie.
WeitereProdukt-undInstallationsinformationenndenSieunterwww.fusionelectronics.com
Perulterioriinformazionisuiprodottielaloroinstallazione,potetevisitarewww.fusionelectronics.com
Для получения дополнительной информации о продуктах и установке зайдите, пожалуйста, на: www.fusionelectronics.com
/