2. Hank
  3. HKZW-STICK02

Hank HKZW-STICK02 User manual

  • Hello! I have analyzed the specification for HANK Z-Wave Adapter HKZW-STICK02. This document details the device's function as a Z-Wave controller via USB and its ability to manage a Z-Wave network. I'm ready to answer any questions you may have about its specifications, features or usage.
  • What is the main function of the Stick?
    How can I use controller on PC?
    What is the radio frequency of the stick?
Stick Engineering Specification
HKZW-STICK02
The Stick is a USB v2.0 full speed low power CDC-ACM compliant Z-Wave™ adapter in a
thumb drive form factor. The Stick can act as a Z-Wave Controller when it’s connected to a
host like PC, MAC or Gateway (some in the market) etc. With a certain program installed on
the PC, it can add or remove devices in or from a network.
Ⅰ. GENERAL INFORMATION ABOUT FLOOD SENSOR
1. Product layout
2. Specifications
Power supply:
DC 4.75~5.25V
Storage temperature:
-20-60℃
Operational temperature:
-10-40℃
Radio protocol:
Z-Wave
Radio frequency:
908.42MHz
Ⅱ. Inclusion and Exclusion
Plug the stick to the PC’s USB port, start PC Controller and then it can add or remove other
Z-Wave device.
/