Grundig GV 9400 NIC Owner's manual

Brand: Grundig

Model: GV 9400 NIC

Type: Owner's manual

VIDEORECORDER

GV 9400 NIC

ENGLISH

NEDERLANDS

FRANÇAIS

ESPAÑOL

PORTUGUÊS

CONTENTS________________________________________________________________________

4 Videorecorder GV 9400 NIC

Special features of your video recorder

Contents of delivery

5 Installation and Safety

6 At a Glance

Front side of the video recorder

Rear side of the video recorder

The remote control

9 Connecting and Preparation

Connecting the aerial, TV set and mains cable

Switching the video recorder on and off (energy-saver mode)

Inserting batteries into the remote control

11 Settings

Adjusting the TV set to the video recorder

Channel programming with the automatic tuning system ATS euro plus

14 Playback

Basic playback functions

Additional playback functions

Index search

17 Recording

The three recording options

The video programme system (VPS/PDC)

Instant recording

Assembling recordings with clean joints

Selecting the audio track

Locating certain recordings using the Video Index Search System (VISS)

Programmed recording – by entering the ShowView number

Programmed recording– by entering the data for the desired TV programme

Checking, altering and clearing programmed recording data

Interrupting the recording standby mode of the video recorder

Re-activating the recording standby mode of the video recorder

26 Copying

from a second video recorder, a DVD player, or a camcorder

27 Operation with a Satellite Receiver

29 Operation with a Decoder

CONTENTS__________________________________________________________________________________

30 Sound Playback

31 Special Settings

Re-sorting TV channels manually

Clearing TV channels from the station table

Changing or entering station names

Channel programming with the manual tuning system or by entering

the channel numbers manually

Skipping TV channels

35 Setting the Time and Date

Updating the time and date automatically

Setting the time and date manually

36 Special Functions

Selecting the »MODE« menu

On-screen display on/off

Continous playback

NICAM sound

Selecting the video recorder’s control address

Child lock

38 Remote Control of TV Sets

39 Fixing Faults Yourself

40 Technical Data

41 Help in the Case of a Defect

Grundig After-Sales Points

ENGLISH

SP/LP

TIMER / V+

TIMER

ON/OFF

CLEAR

AUDIOMONITOR INDEX DUB

INFO RECORD

TV VIDEO 2

1 2 3

4 5 6

7 8 9

SV 0

VIDEO IN AUDIO IN

OK INFO

VIDEORECORDER

Special features of your video recorder

Three recording options

– Instant recording, i.e. you select the desired programme on the video recorder

and start recording immediately.

– Programmed recording at a later date with the help of the ShowView numbers.

– Programmed recording at a later date by entering the data for the desired

programme if you do not know the ShowView numbers.

High-speed drive

With this high-speed drive the fast rewind time of, for example, of an E-180

cassette is reduced to about 72 seconds.

ShowView recording

Really easy programming of recordings. Select the desired programme from your

TV guide, enter the ShowView number indicated there, ready.

Energy-saver mode

Very low enregy consumption in standby mode.

The consumption lies below 2 W.

NTSC playback

The video recorder enables playback of recordings made with the NTSC

colour norm.

VIDEO RECORDER GV 9400 NIC______________

1Video recorder GV 9400 NIC

2Remote control

32 batteries 1.5 V–, Mignon type

4RF (aerial) connection cable

5User manual

Contents of delivery

In order that you may enjoy this high-quality and comfortable video recorder for

a long time it is very important that you observe the following points when instal-

ling the recorder.

This video recorder is intended for the reception, recording and reproduction of

TV picture and sound signals.

Any other application is expressly prohibited.

If the recorder is exposed to drastic temperature changes, for example when

taking it from a cold to a warm place, connect the recorder to the mains supply

and let it stand at the new place for at least two hours without a cassette loaded.

The recorder is intended for use in dry rooms. If you wish to operate it in the open

air, make absolutely sure that it is protected against moisture (rain, splashes of

water). Do not expose the recorder or the cassette to any moisture.

Place the recorder on a flat and hard surface. Do not place any objects (e.g.

newspapers) on the recorder and no tablecloth or similar below the recorder.

Do not place the recorder in the immediate vicinity of a heat source or in direct

sunlight as this would prevent appropriate cooling. Keep the recorder away from

magnetic fields (e.g. loudspeakers).

Never insert any foreign objects into the cassette compartment. This might

damage the high-value mechanism.

Never open the recorder. Damage caused by unqualified work is not covered by

the manufacturer’s guarantee.

Do not place any object filled with water (vases and similar) on the recorder. The

object might fall over and the liquid spilling into the unit would impair its electrical

safety.

Thunderstorms are a danger for any electrical appliance. Even when switched

off, the recorder might be damaged by lightning striking the mains supply and/or

the aerial lead. During a thunderstorm you must always disconnect the mains and

aerial plugs.

For this video recorder, technology and ecology form a convincing overall idea.

Only ecologically high-grade materials are used. The packing consist of almost

100% recycled paper, its plastic parts have been reduced to a minimum. The

batteries supplied are free of mercury and cadmium. For environmental reasons

no buffer battery is used. To enable a high-grade recycling after use, the number

of plastic parts has consequently been reduced. All large plastic parts are

marked. To facilitate service and for optimum recycling, this device has been

designed in a specially disassembly-friendly and recycling-friendly way.

ENGLISH

INSTALLATION AND SAFETY_________________________

°C2h

°C

VIDEO IN AUDIO IN

OK INFO

VIDEO IN AUDIO IN

OK INFO

Krieg im Balkan

VIDEO IN AUDIO IN

OK INFO

VIDEO IN AUDIO IN

OK INFO

RF OUT

SORTIE ANTENNE

ANTENNA IN

ENTREE ANTENNE

AUDIO OUT

SORTIE SON

LINE1(I)IN/OUT

SON/VIDEO(L1/I)

LINE2(II)IN/DECODER

CANAL PLUS/L2(II)

Front side of the video recorder

AT A GLANCE________________________________________________________________

VIDEO IN AUDIO IN

OK INFO

VIDEO IN Video input for camcorder.

L AUDIO IN R Left/right audio inputs for camcorder.

AASwitches the video recorder off.

NNEjects the cassette.

››OK Calls up data, confirms and saves settings.

››INFO Displays the menu, switches back to the TV picture.

**PSelects programmes downwards.

ÜÜPSelects programmes upwards.

●Starts recording.

rr During playback: reverse picture search;

after stop: fast rewind.

II Pause during recording, freeze-frame during playback.

eStarts playback.

ee During playback: forward picture search;

after stop: fast forward wind.

■Switches the video recorder on;

ends all tape mechanism functions.

ENGLISH

RF OUT

SORTIE ANTENNE

ANTENNA IN

ENTREE ANTENNE

AUDIO OUT

SORTIE SON

LINE1(I)IN/OUT

SON/VIDEO(L1/I)

LINE2(II)IN/DECODER

CANAL PLUS/L2(II)

ÜÜMains cable to mains supply socket.

AUDIO OUT R L Audio output for hifi system.

LINE 2 (II) IN/DECODER Euro/AV connector for external device.

LINE 1(I) IN/OUT Euro/AV connector for TV set.

ANTENNA IN Input socket for domestic aerial.

RF OUT RF output socket for aerial cable connection

with TV set.

Rear side of the video recorder

AT A GLANCE_____________________________________________________________________________

The remote control

On this page you will find a brief description of the important remote control

functions. Refer to the corresponding chapters of this manual for more infor-

mation on operation.

Direct the remote control at the video recorder.

88Switches the video recorder off (standby).

1 … 0 Numeric buttons for various entries ,

the » 0« button selects the »

A I

«, »

« programme

positions.

SV Initiates programmed recording with ShowView.

TIMER/V+

II Pause in recording mode, freeze-frame in playback mode.

rr Reverse picture search during playback,

fast rewind after stop.

eStarts playback.

ee Forward picture search during playback,

fast forward after stop.

■Switches the video recorder on; ends all tape mechanism func-

tions and switches the video recorder to stop.

i INFO Switches to the menu and back to the TV picture.

● RECORD Starts recording.

CC DDSelect channels, » +« up, » –« down;

select various functions in the menus.

OK Calls up, confirms and stores data.

FFEEFinetuning;

select various functions in the menus.

TIMER Activates and de-activates programmed recording.

ON/OFF

SP/LP Switches between longplay mode and standard play mode.

CLEAR Clears data, activates entries, resets the playing time display to

0:00:00

«.

MONITOR Switches the picture screen between TV picture and video recor-

der picture (monitor mode).

AUDIO Selects the audio track in recording and playback mode.

INDEX Activates the INDEX search function.

DUB No function.

VIDEO 2 Switches to the video control address 2.

TV Swiches to TV control mode.

See page 38 for the possible functions.

SP/LP

TIMER / V+

TIMER

ON/OFF

CLEAR

AUDIOMONITOR INDEX DUB

INFO RECORD

TV VIDEO 2

1 2 3

4 5 6

7 8 9

SV 0

ENGLISH

Connecting the aerial, TV set and mains cable

1Connect the aerial cable from the domestic aerial with the aerial socket

»ANTENNA IN« of the video recorder.

2Connect the aerial cable supplied with the »RF OUT« socket of the video

recorder and the aerial socket of the TV set.

3If the TV set is equipped with one or several EURO-AV sockets:

connect a common EURO-AV cable supplied with the »LINE1(I) IN/OUT«

socket of the video recorder and the AV 1 socket of the TV set.

– The advantage of this connection is a better picture and sound quality

during playback.

– The stereo sound can be played back via a stereo TV set only via this

connection.

4Connect the mains cable with the mains supply socket.

– The video recorder is now in standby.

Attention:

The video recorder is isolated from the mains only when the mains cable is

disconnected from the mains supply socket.

CONNECTING AND PREPARATION _______

RF OUT

SORTIE ANTENNE

ANTENNA IN

ENTREE ANTENNE

AUDIO OUT

SORTIE SON

LINE1(I)IN/OUT

SON/ VIDEO(L1/I)

LINE2(II)IN/DECODER

CANAL PLUS/ L2(II)

RF OUT

SORTIE ANTENNE

ANTENNA IN

ENTREE ANTENNE

AUDIO OUT

SORTIE SON

LINE1(I)IN/OUT

SON/ VIDEO(L1/I)

LINE2(II)IN/DECODER

CANAL PLUS/ L2(II)

AV1 AV2

RF OUT

SORTIE ANTENNE

ANTENNA IN

ENTREE ANTENNE

AUDIO OUT

SORTIE SON

LINE1(

)IN/OUT

SON/ VIDEO(L1/

)

LINE2(

)IN/DECODER

CANAL PLUS/ L2(

)

TV R

Switching the video recorder on and off

(energy-saver mode)

1Switch the video recorder on with the »■« button.

2Switch the video recorder to standby with the »88« button.

– The video recorder is now in standby and the time is visible in the

display.

3Switch off with the » 88« button.

– The video recorder is now switched off and the time indication goes out. The

power consumption falls below 2 W.

Note:

The video recorder cannot be switched off if recordings are programmed.

Inserting batteries into the remote control

1Press the catch and remove the cover from the battery compartment.

2Insert the batteries (Mignon type, e.g. UM-3 or AA, 2 x1.5 V). Observe the

polarity marks on the bottom of the battery compartment.

Note:

If your recorder no longer responds correctly to the remote control com-

mands, the batteries may be exhausted. Exhausted batteries must be remo-

ved.

The manufacturer cannot be held responsible for damage resulting from

battery leakage.

Environmental protection

The remote control batteries, even those containing no heavy metals, do not

belong in the household waste. Used batteries can be disposed of for recyc-

ling at most specialized dealers without paying a fee.

CONNECTING AND PREPARATION_______________________________________

ENGLISH

SETTINGS____________________________________________________________________________

Adjusting the TV set to the video recorder

This adjustment is not necessary if the video recorder and the TV set are con-

nected with a EURO-AV cable.

Preparation

Switch the TV set on.

Select the »AV« programme position for video playback via the aerial socket.

Consult also the user manual of your TV set.

Note:

The video recorder must be in standby mode (not in the energy-saver mode).

Adjustment

1On the TV set in the UHF range between channel 21 and channel 69, search

for a “free“ channel on which no TV programme is received (only picture and

sound noise).

– Many TV sets display the channel number.

2Store the “free” channel number on the TV set.

– For this consult the user manual of the TV set.

3Press and hold down for about three seconds the »INFO« button on the video

recorder.

– »

CH 36 RF

« , for example, is displayed on the video recorder.

4Using the » **PÜÜ« buttons, tune through the channels on the video recorder

until the picture from the recorder appears on the picture screen of the TV set.

5If the picture quality of the “recorder picture” is good, store the setting with the

»OK « button.

– The video recorder switches to standby.

Note:

If the quality of the “recorder picture” is poor, or the picture quality of one or

more TV programmes on the TV set gets worse, you must search a different

“free” channel on the TV set. For this, repeat the steps 1 to 5.

COUNTRY

DK P

FIN E

NL CH

OTHERS

w q r e :SELECT

OK :ENTER INFO:EXIT

SETTINGS ____________________________________________________________________________________

Channel programming with the automatic tuning

system ATS euro plus

The recorder has a built-in receiver. It can therefore receive and record television

programmes independently of the TV set.

For this, you must programme the TV channels on the video recorder.

When carrying out this function, the time is automatically updated, provided a TV

programme with teletext is received on programme position 1.

If the time has not been set automatically, it must be set manually as described in

the chapter “Setting the Time and Date” on page 35.

84 programme positions are available which can be assigned as desired to TV

channels received via the aerial, the cable system or a satellite receiver.

Preparation

Switch the TV set on.

Select the »AV« programme position for video playback on the TV set.

Programming

1Press the » ■« button.

– The »AUTO INSTALLATION« table appears on the picture screen of the

TV set.

Help:

If the »AUTO INSTALLATION« table does not appear, press the » qP« and

»INFO« buttons on the video recorder at the same time until the table

appears.

2Initiate programming with the »OK« button.

– The »SPRACHE« (LANGUAGE) table appears on the picture screen.

3Use the » CCDDFFEE« buttons to select the desired language then confirm

with the »OK« button.

– The

»COUNTRY«

table appears on the picture screen.

4Select the country (place of installation) using the » CCDDFFEE« buttons.

If the country you require is not given in the table, select the »OTHERS« line.

Confirm your selection with the » OK « button.

A table asking you whether the aerial cable or the EURO-AV cable has been

connected to the video recorder appears.

AUTO INSTALLATION

PRESS OK KEY TO START.

AUTOMATISCHE EINSTELLUNG

ZUM START DIE OK-TASTE

DRÜCKEN.

OK :EINGABE INFO:ENDE

SPRACHE

ENGLISH ESPAÑOL

DEUTSCH SVENSKA

FRANÇAIS NEDERLANDS

ITALIANO PORTUGUESE

w q r e :WÄHLEN

OK :EINGABE INFO:ENDE

ENGLISH

SETTINGS ____________________________________________________________________________________

Press the

»OK« button to start the automatic tuning system.

– The recorder searches all channel numbers for TV stations, then sorts and

stores them. This can take several minutes.

– When the search is completed, the table »MOVE« appears on the

picture screen.

Note:

You can sort the found TV channels to suit your taste.

If the order of the TV channels is already to your taste, continue with step

7Use the » CCDDFFEE« buttons to select the channel you wish to move then

mark it with the » OK « button.

8Use the » CCDDFFEE« buttons to move the marked channel to the desired

programme position then confirm with the »OK« button.

If you wish to sort further TV channels, repeat the steps

and

9End the setting with the » i INFO« button.

Note:

Further settings such as manual channel search, changing the order of the

channels at a later date, clearing TV channels from the station table, or

assigning station names are described from page 31.

1 C 02

AUTOMATIC SORTING.

PLEASE WAIT.

. . . . . . . . . . . . . . . . . . . . . . .

INFO:EXIT

MOVE 1/5

1ARD 17C23 13

2ZDF 18C24 14

3RTL1 19C31 15

4RTL2 10C47 16

5SAT1 11 17

6PRO7 12 18

w q r e :SELECT

OK :ENTER INFO:EXIT

PLAYBACK_________________________________________________________________________

Basic playback functions

Preparation

Switch the TV set on.

Select the »AV« programme position for video playback on the TV set.

Insert a recorded cassette with its window up into the cassette compartment until it

is automatically pulled in.

– The cassette symbol »z« appears in the display of the recorder.

1Start playback with the » e« button.

– The tape length indication and briefly after this the remaining playing time

indication appear on the picture screen.

2Use the »II« button to switch to Freeze-frame/Pause.

Press repeatedly to advance the freeze-frame step by step.

3Press the »rr «button during playback to select the reverse picture search

function.

Press the »ee«button during playback to select the forward picture search

function.

Press repeatedly to select different playback speeds.

4End playback with the »■« button.

5Select fast rewind with the »rr«, fast forward wind with the »ee« button.

6Press the »

« button on the video recorder to eject the cassette.

Notes:

After starting playback the video heads are automatically cleaned.

You can change the video recorder’s display mode with the »OK« button:

tape length, remaining playing time (»R«), and time of day.

Pressing the »CLEAR« button resets the tape length indication to»

0:00:00

«.

VIDEO IN AUDIO IN

OK INFO

SP/LP

TIMER / V+

TIMER

ON/OFF

CLEAR

AUDIOMONITOR INDEX DUB

INFO RECORD

TV VIDEO 2

31 2

64 5

97 8

0SV

ENGLISH

Additional playback functions

Double playback speed

1Press the » e« button during playback.

2Press the » e« button once again to return to normal playback.

Slow motion

1During freeze-frame (playback-pause): press the » II I « button a longer time.

– Brief display on the video recorder: » SLOW«

2Press the » e« button to return to normal playback.

Advancing freeze-frames step by step

1During freeze-frame (playback-pause): repeatedly press the » II« button.

– Brief display on the video recorder: » STILL«

2Press the » e« button to return to normal playback.

Improving the picture of a freeze-frame

If the picture jitters or appears uneven during the freeze-frame function, it can be

optimized:

1During the freeze-frame function (playback-pause), use the » CC« or » DD«

button to adjust the picture to suit your personal taste.

2Press the » e« button to return to normal playback.

Correcting picture interference (track adjustment)

1During playback, use the » CC« or » DD« button to adjust the picture to suit

your personal taste.

– This setting is maintained until the cassette is removed.

2If you press the » **PÜÜ« buttons on the video recorder at the same time, the

» AUTOTRACKING« function is activated.

Automatic picture improvement (ACC Plus)

„Cassettes recorded on another video recorder may have a poor picture and/or

sound quality. This is not a fault of your recorder!

1Press the »OK« button on the video recorder during playback. The automatic

picture improvement function (ACC Plus) optimizes the picture.

Note:

The freeze-frame and picture search functions are automatically switched off

after a certain time.

PLAYBACK __________________________________________________________________________________

Selecting the sound track

When playing back cassettes which have been recorded with stereo or two-

channel sound broadcasts, it is possible to select the desired sound track with the

»AUDIO« button:

– stereo (helical hifi track) – display »L R«;

– left, sound track 1 – display »L«;

– right, sound track 2 – display »R«;

– mono (longitudinal track) – no display.

Playing back NTSC colour recordings

When playing back NTSC recordings, the recorder switches automatically to this

system.

Notes:

During NTSC playback, no freeze-frame function is possible.

During NTSC longplay playback, picture interferences may occur.

Index search

This search system enables the automatic return to the tape position »

0:00:00

«.

Preparation

Switch the TV set on.

Select the »AV« programme position for video playback on the TV set.

Insert the desired cassette.

Control

1Start playback with the »e« button.

2Select the tape indication with the » OK« button.

3At the desired tape position, press the » CLEAR« button to reset the tape indi-

cation to »

0:00:00

«.

4To return to the marked tape position, press the » INDEX « button and then

the » 0« button.

– The tape is rewound to the marked position (index).

ENGLISH

RECORDING____________________________________________________________________

The three recording options

With your video recorder you may record programmes in three different ways:

1Right away, that is you select the desired programme on the video recorder

then start recording.

2At a later time using the ShowView number.

3At a later time by entering the data of the desired TV programme if you do not

know the ShowView numbers.

For the recording modes 2 and 3, you can enter the recording data for

eight different broadcasts over a period of one year or for dayly or weekly

recordings at the same time. Your favourite broadcasts will automatically be

recorded via the Video Programme System (VPS) which is controlled by the TV

broadcasters.

The video programme system (VPS/PDC)

If your programmed recordings are controlled via this system, the desired

programme will always completely be recorded.

Notes on the video programme system

Many TV stations broadcast an additional programme-related (VPS/PDC) signal

which indicates the start and duration of each individual TV programme. It is

therefore important when programming the recorder to enter the switch-on and

switch-off times to the exact minute.

If TV programmes are altered or moved, special VPS/PDC times are indicated in

the programme guides. They must be entered instead of the normal starting times.

TV programmes without VPS/PDC signal

With TV stations that do not transmit a VPS/PDC signal, recording is only started

by the switch-on time and only ended by the switch-off time.

This does not depend on whether the VPS/PDC signal is confirmed or cleared

when programming recordings.

Programming several TV programmes on one day

If you wish to record several TV programmes on one day, you must decide which

one is to be recorded completely if there is a risk of alterations to timing.

RECORDING _______________________________________________________________________________

Instant recording

Preparation

Switch the TV set on.

Select the »AV« programme position for video playback on the TV set.

Insert a cassette with sufficient playing time and intact erase tab (cassette not

erase-protected) into the cassette compartment until it is fully pulled in.

– The cassette symbol » z« appears in the recorder’s display.

Control

1Before starting recording, select the desired channel with the »CCDD«or

PÜÜ

«or»0…9« buttons.

2If you wish to select the longplay mode, press the » SP/LP« button.

– »

« is displayed on the recorder.

3Start recording by a longer pressure on the »●RECORD« button.

Press repeatedly to enter a switch-off time in steps of 10 minutes.

4Select recording-pause with the »II« button.

5End the recording with the »■« button.

6Fast rewind with the »rr«, fast forward wind with the »ee« button.

7Press the »

« button on the video recorder to eject the cassette.

Note:

The tape length indicator can be set to »

0:00:00

« by pressing the

»CLEAR« button.

VIDEO IN AUDIO IN

OK INFO

SP/LP

TIMER / V+

TIMER

ON/OFF

CLEAR

AUDIOMONITOR INDEX DUB

INFO RECORD

TV VIDEO 2

31 2

64 5

97 8

0SV

ENGLISH

RECORDING _______________________________________________________________________________

Assembling recordings with clean joints

With this function you will have no disturbing transitions between the individual

recordings during playback.

1During playback, locate the end of the picture scene at which you wish to join

the new recording. Press the »II« button at this tape position.

2Switch the recorder to recording-pause using the »●RECORD« button.

3Enter the desired programme position number with one or two digits using the

»0 ... 9« buttons then start the new recording with the »●RECORD« button.

4End the recording with the »■« button.

Selecting the audio track

When playing back cassettes which have been recorded with stereo or two-

channel sound broadcasts, it is possible to select the desired audio track with the

»AUDIO« button:

– stereo (helical hifi track) – display »L R«;

– left, sound track 1 – display »L«;

– right, sound track 2 – display »R«;

– mono (longitudinal track) – no display.

Locating certain recordings using the Video Index

Search System (VISS)

With this system you may find the beginning of every recording in a precise and

fast way. The “marks” required for this are automatically placed at the beginning

of each recording.

Preparation

Switch the TV set on.

Select the »AV« programme position for video playback on the TV set.

Insert a cassette.

Control

1Press the » INDEX « button.

2Repeatedly press the » rr « or » ee « button to enter the index number of

the desired recording (max. 19).

– The tape is wound to the selected recording and playback is started there.

RECORDING _______________________________________________________________________________

Programmed recording –

by entering the ShowView number

Notes:

The time and date must correctly be set on the recorder.

The ShowView numbers of the different broadcasts can be found in TV

programme guides.

If all programmed recording positions (TIMER positions) are occupied, you

must clear one position, refer to “Clearing programmed recording data” on

page 25.

Programming can be aborted at any time by pressing the » 88« button.

SHOWVIEW® is a trademark of Gemstar Development Corporation.

SHOWVIEW is manufactured under licence from Gemstar Development

Corporation.

Preparation

Switch the TV set on.

Select the »AV« programme position for video playback on the TV set.

Insert a cassette with sufficient playing time and intact erase tab (cassette not

erase-protected) into the cassette compartment until it is fully pulled in.

If a cassette is already inserted, switch on with the »■« button.

If the recorder is in recording standby mode, de-activate this mode with the

»TIMER ON/OFF« button.

Example

1Start programming with the » TIMER SV « button.

– The »SHOWVIEW« table appears on the picture screen.

2Enter the ShowView number of the desired TV programme using the

»0 … 9 « buttons.

Note:

If incorrect entries are made, the ShowView number can be cleared digit by

digit with the »CLEAR « button.

If the programme is to be recorded daily or weekly at the same time, use the

»DD« button to select the » ONCE WEEKLY DAILY« line then select the

desired function with the » FF« or » EE« button.

The “daily” function cannot be used for recordings on Saturday or Sunday.

■

➔

SHOWVIEW NO. –

ONCE WEEKLY DAILY

w q :SELECT 0~9 :DATA

OK :ENTER INFO:EXIT

■

➔

SHOWVIEW NO. 12555

ONCE WEEKLY DAILY

w q :SELECT 0~9 :DATA

OK :ENTER INFO:EXIT

Page is loading ...

Grundig GV 9400 NIC Owner's manual

Grundig GV 9400 NIC Owner's manual

Grundig GV 9400 NIC Owner's manual

Related papers

Other documents