MODWAY EEI-6162-BLK Assembly Instructions

Type
Assembly Instructions
A S S E M B LY I N S T R U C T I O N S
EEI-6162
V1.07.12.22
Questions? Contact us!
609.256.9000 • cs@modway.com
www.modway.com
PAGE 2 OF 9
Only use hand tools to assemble this item. Do not use power tools.
Do not tighten bolts or screws completely until all hardware is lined up
and inserted into the holes.
Do not over-tighten screws and bolts to avoid stripping the hardware
or cracking the item.
For vanity and plumbing installation, we suggest hiring a professional
contractor and plumber.
Assemble your item on a flat, carpeted area, with plenty of space to work.
This will prevent damage and scratches to your floors or the item while
you’re assembling the product.
Keep all components and packaging out of reach of children or animals
to avoid risk of choking or suffocation.
Approx. 30 minutes
assembly time
2 people recommended
for assembly
Care instructions are
listed in the last step
of this manual
Read through all of
the instructions
before starting
Make sure you have all
parts and components
before discarding any
packing materials
Let’s get started!
Missing parts or hardware? Need assistance?
Contact us before returning your item. We're here to help!
609.256.9000 • cs@modway.com
Provided hardware:
A Allen Key 4 mm x1
B Bolt M6x15 mm x10
C Bolt M6x10 mm x8
D Washer Ø16x2 mm x14
E Shelf Pin 5 mm x4
F Bolt M6x40 mm x4
2
3
4
5
1 Cabinet x1
2 Wooden Shelf x1
3 Metal Legs x2
4 Metal Pipe x2
5 Metal Handle x2
Furniture components:
1
PAGE 3 OF 9
COM P O N E N T S
Step 1
3Metal Legs x2
Metal Pipe x2
4
Step 2
H A R D W A R E
COMPONENTS
A
C
3
4
Allen Key 4 mm x1
Bolt M6 x 10 mm x8
Metal Legs x2
Metal Pipe x2
A
C
3
4
3
4
A
C
3
A
C
4
A
C
4
3
PAGE 4 OF 9
Step 3
HA R DWA R E
COMPONENTS
3
A
B
1
Allen Key 4 mm x1
Bolt M6 x 15 mm x10
Washer Ø16x2 mm x10
Cabinet x1
Metal Legs (Assembly) x1
D
3
A
B
D
3
1
1
PAGE 5 OF 9
HA R DWA R E
COMPONENTS
Step 4
A
F
1
Allen Key 4 mm x1
Bolt M6x40 mm x4
Washer Ø16x2 mm x4
Cabinet x1
Metal Handle x2
D
5
5
1
1
F
D
A
5
PAGE 6 OF 9
Step 6
COMP O N E N T S
HA R D W A R E
Step 5
E
1
Shelf Pin 5 mm x4
Cabinet x1
C O MP O N E N T S
1
2
Cabinet x1
Wooden Shelf x1
1
1
E
2
1
1
2
PAGE 7 OF 9
Step 8
Step 7
Apply a thin bead of silicone compound around the vanity base and set the vanity top carefully in place. Remove
any axcess silicone compound with a wet rag.
Attachment of Furniture : This
furniture may represent a danger
for your security if it's attachment
on the wall has been done in an
incorrect way. This attachment
must be done by a person with
great expertise who will make sure
adequacy between the device of
fixing and the wall. Please source
the right fitting according to the
wall type. For your safety, it is
imperative to fix your furniture to
the wall
Foam / Rubber pad
not include
Detail hole for wall fixing
Note : Hammer
and fisher not
include
Sold separately
Silicone not include
Silicone
PAGE 8 OF 9
A quick note...
Your sink basin comes complete with a silver overflow ring.
If you'd like to remove this overflow ring, you can do so by hand.
Missing parts or hardware? Need assistance?
Contact us before returning your item. We're here to help!
609.256.9000 • cs@modway.com
Overflow Ring
PAGE 9 OF 9
Vanity Cabinet assembly is complete
C A RING F O R Y O U R I TEM
Indoor use only.
Not contract grade.
Clean using a non-abrasive cloth
and a mild cleaner.
Never use harsh chemicals,
as they could damage the finish
or integrity of the item.
CONNECT WITH US!
Tag us @modway_furniture and #modway
for a chance to be featured.
Great job!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

MODWAY EEI-6162-BLK Assembly Instructions

Type
Assembly Instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI