Possible applications of the Kuepper
build-in cabinet as corner element
Item-Number 12160
Why use the build-in cabinet as angle element?
Should you decide to place two of our workbenches at an angle of 90°, you can create one
uniform working surface by using our wood connection element 12060. Thus you create an
empty space under the connection element, which may be put into use with our build-in
cabinet 12160.
What is this document for?
Different body widths of our workbenches result from the great variety in our range. To
simplify the planning of your workshop we have decided to use standard wooden tops; this
leads to different lateral overhang from worktop in relation to the body of the workbench.
Certain workbench combinations cannot be used together with the angle element 12160.
small overhanglarge overhang
What needs to be taken into consideration?
In order to use the angle element 12160 it may be necessary to mount the worktop off-center
in order to create enough space for the cabinet. The following diagram shows a combination
of workbenches 1530 and 12150, were the worktops need to flush-mounted.
Whencanthebuild‐incabinetbeusedasangleelement?
Inthechartbelowyoumayfindtheworkbenchcombinationswithwhichthebuild‐incabinetcanbe
used.
Chart:
Legend:
Alignment of the workbenches:
xx
xx
11
12380
1203
0
x1 11
1228
0
x1x1
11
1227
0
1287
0
1217
0
1257
0
1253
0
x1 1x
1215
0
1✔1✔
1✔11
1205
0
1225
0
1224
0
1208
0
1211
0
1212
0
1239
0
1249
0
1219
0
1204
0
1✔
12380
workbench1
1209
0
x1x1xx
1229
0
12270
12870
12170
12570
12030
12280
12240
12080
12110
12120
12530
12150
workbench2
12090
12290
12390
12490
12190
12040
12050
12250
✔
1
x
build‐incabinetmaybeusedifworktopismountedoff‐center
useofbuild‐incabinetnotpossible
build‐incabinetmaybeusedwithoutrestrictions
alignmentof
the
workbenches
workbench2
workbench1
-
1
-
2
-
3
