ASRock Rack M350 User manual

ASRock Rack
Brand
ASRock Rack
Model
M350
Type
User manual

This manual is also suitable for

Quick Installation Guide
Mezzanine Card Series
P/N: 15G065045001AK V1.1
Introduction
ank you for purchasing ASRock Rack mezzanine card, a reliable mezzanine card
produced under ASRock Rack’s consistently stringent quality control. It delivers excellent
performance with robust design conforming to ASRock Rack’s commitment to quality and
endurance.
Model Dimension Interface / Connector LAN / Storage Controller
M350 2.7'' x 4.3''
(6.8 cm x 10.9 cm)
Gigabit LAN
10/100/1000 Mb/s / 2 x RJ45 1 x Intel® i350
M540 2.7'' x 4.3''
(6.8 cm x 10.9 cm) 10G/1G/100M/s / 2 x RJ45 (10G Base-T) 1 x Intel® X540
M599 2.7'' x 4.3''
(6.8 cm x 10.9 cm) 10G/s / 2 x SFP+ (Fiber) 1 x Intel® 82599ES
M350R 2.7'' x 4.3''
(6.8 cm x 10.9 cm)
Gigabit LAN
10/100/1000 Mb/s / 2 x RJ45 1 x Intel® i350
M540R 2.7'' x 4.3''
(6.8 cm x 10.9 cm) 10G/1G/100M/s / 2 x RJ45 (10G Base-T) 1 x Intel® X540
M599R 2.7'' x 4.3''
(6.8 cm x 10.9 cm) 10G/s / 2 x SFP+ (Fiber) 1 x Intel® 82599ES
M710 2.7'' x 4.3''
(6.8 cm x 10.9 cm) 10/40Gb/s / 2 x QSFP+ 40Gb/s 1 x Intel® XL710-AM2
M710S 2.7'' x 4.3''
(6.8 cm x 10.9 cm) 10/40Gb/s / 1 x QSFP+ 40Gb/s 1 x Intel® XL710-AM1
MCX3 2.7'' x 4.3''
(6.8 cm x 10.9 cm) 10/40Gb/s / 2 x QSFP+ 40Gb/s 1 x Mellanox
ConnectX®-3 Pro EN
M3008S 2.7"x 4.3"
(6.8 cm x 10.9 cm) SAS 12G / 2 x SAS HD 4i (8 ports) AvagoSAS3008 PowerPC
476 controller @ 1.2 GHz
*15G065045001AK*
1 LAN RJ-45 Port (LAN1)
2 LAN RJ-45 Port (LAN2)
21
ACT/LINK LED
SPEED LED
LAN Port
M350
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(LAN_ LED_1) 1
LAN3_LINK
LED_PWR
LED_PWR
LAN4_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
(4.3in)109.40mm
(2.7in)68.00mm
(0.5in)13.80mm
LAN1
LAN2
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
On Link
SpeedLED
Status Description
O 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
1 LAN RJ-45 Port (10G Base-T)(LAN1)
2 LAN RJ-45 Port (10G Base-T)(LAN2)
21
M540
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(LAN_ LED_1) 1
LAN3_LINK
LED_PWR
LED_PWR
LAN4_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
LAN1
LAN2
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
On Link
SpeedLED
Status Description
O 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
1 SFP+ Port (Fiber) (LAN1)
2 SFP+ Port (Fiber) (LAN2)
12
M599
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(LAN_ LED_1) 1
LAN3_LINK
LED_PWR
LED_PWR
LAN4_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
LAN2_10G LAN2_1G
LAN1_10G/LAN1_1G
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
On Link
SpeedLED
Status Description
O 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
1 LAN RJ-45 Port (LAN1)
2 LAN RJ-45 Port (LAN2)
12
M350R
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(LAN_ LED_1) 1
LAN3_LINK
LED_PWR
LED_PWR
LAN4_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
(4.3in)109.40mm
(2.7in)68.00mm
(0.3in)6.50mm
LAN1
LAN2
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
On Link
SpeedLED
Status Description
O 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
1 LAN RJ-45 Port (10G Base-T)(LAN1)
2 LAN RJ-45 Port (10G Base-T)(LAN2)
12
M540R
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(LAN_ LED_1) 1
LAN3_LINK
LED_PWR
LED_PWR
LAN4_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
(4.3in)109.40mm
(2.7in)68.00mm
(0.7in)16.60mm
LAN1
LAN2
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
On Link
ACT/LINK LED
SPEED LED
LAN Port
SpeedLED
Status Description
O 10/100Mbps connection
Orange 1Gbps connection
Green 10Gbps connection
1 SFP+ Port (Fiber) (LAN1)
2 SFP+ Port (Fiber) (LAN2)
12
M599R
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(LAN_ LED_1) 1
LAN3_LINK
LED_PWR
LED_PWR
LAN4_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
mm (2.7in)68.00
mm (4.3in)109.40
mm (0.46in)11.60
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking 10G Data Activity
On 10G Link
ACT/LINK LED
LAN Port
1 QSFP+ 40Gb/s (LAN1)
2 QSFP+ 40Gb/s (LAN2)
12
M710
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(XL_LAN_LED) 1
LAN1_LINK
LED_PWR
LED_PWR
LAN2_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
LAN1
LAN2
(4.3in)109.40mm
(2.7in)68.00mm
(0.5in)13.80mm
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
On Link
SpeedLED
Status Description
O 10/100Mbps connection
O 1Gbps connection
Green 10/40Gbps connection
ACT/LINK LED
SPEED LED
LAN Port
1 QSFP+ 40Gb/s (LAN1)
1
M710S
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(XL_LAN_LED) 1
LAN1_LINK
LED_PWR
LED_PWR
LAN2_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
LAN1
(4.3in)109.40mm
(2.7in)68.00mm
(0.5in)13.80mm
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
On Link
ACT/LINK LED
SPEED LED
LAN Port
SpeedLED
Status Description
O 10/100Mbps connection
O 1Gbps connection
Green 10/40Gbps connection
1 QSFP+ 40Gb/s (LAN1)
2 QSFP+ 40Gb/s (LAN2)
12
MCX3
• 1 x Mezzanine Card
• 4 x Screws
• 4 x Standos
• 4 x Nuts
• 1 x Support CD
• 1 x Quick Installation Guide
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these head-
ers and connectors. Placing jumper caps over the headers and connectors will cause permanent
damage to the motherboard.
Front LAN LED Connector
(LAN_ LED1) 1
LAN1_LINK
LED_PWR
LED_PWR
LAN2_LINK is 4-pin connector is used for
the front LAN status indicator.
LAN Port LED Indications
Package Contents
LAN2
(4.3in)109.40mm
(2.7in)68.00mm
(0.5in)13.80mm
LAN1
Layout
Onboard Header
Activity/LinkLED
Status Description
O No Link
Blinking Data Activity
PhysicalConnectionLED
Status Description
On Connected
O Disconnected
ACT/LINK
LED
PHYSICAL
CONNECTION
LED
LAN Port
1 MINI SAS HD (SLI_SAS4_7)
2 MINI SAS HD (SLI_SAS0_3)
1 2
M3008S
mm (4.3in)109.40
mm (2.7in)68.00
mm (0.5in)13.27
Layout
Details
Storage Controller AvagoSAS3008 PowerPC 476 controller @ 1.2 GHz
Data Transfer Rates Up to 12Gb/s per port
Internal Connectors SAS 12G x8 (2 x SAS HD 4i)
Support OS
Environment
Operating Temperature 0°C ~ 70°C
Microso® Windows®
- Server 2008 R2 SP1 (64 bit)
- Server 2012 (64 bit)
- Server 2012 R2 (64 bit)
Linux®
- RedHat Enterprise Linux Server 7.0 (64 bit)
- CentOS 7. 0 (64 bit)
- SUSE Enterprise Linux Server 12 ( 64 bit)
MezzanineCardInstallation
Before installing a mezzanine card to a motherboard, remove the motherboard from the
chassis. To do so, be sure to power down the system and remove all connected cables rst. For
more details, refer to the user manual that comes with your system.
*e illustrations are for reference only and may be slightly dierent from the real products due to dierent models.
12
1. Install the four standos into the
motherboard around the mezzanine
card slot.
2. Install the four lock nuts on the bolts
under the motherboard. Hand-tighten
the nuts.
34
3. Gently insert the mezzanine card
into the mezzanine card slot on the
motherboard.
4. Use screws to secure the mezzanine
card to the motherboard standos.
When the mezzanine card is well installed, horizontally slide the motherboard back to the
chassis so the I/O connectors t through the I/O openings at the rear of the chassis. Well install
the motherboard to the chassis with screws. For more details, refer to the user manual that
comes with your motherboard.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

ASRock Rack M350 User manual

ASRock Rack
Brand
ASRock Rack
Model
M350
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents