Bubble-Stream 37.0126.98 Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

INSTRUCTIONS:
1. Remove old aerator from faucet.
Use wrench if necessary.
2. Remove any old washers that
might be caught inside the spout.
3. Clean the threads on faucet for
easier installation.
4. For faucets with outside threads,
remove thicker washer. For faucets
with inside threads, leave thicker
washer in place. Install onto spout
by hand.
5. Turn on faucet. If leak occurs,
tighten more firmly.
INSTRUCCIONES:
1. Quite el viejo aireador del grifo.
Utilice una llave inglesa de ser
necesario.
2. Quite todas las arandelas viejas que
pudieran haber quedado atrapadas
dentro del surtidor de agua.
3. Limpie las roscas del grifo para una
instalación más fácil.
4. Para grifos con roscas externas,
quite las arandelas más gruesa.
Para grifos con roscas internas,
deje la arandela más gruesa en
su lugar. Instale en el surtidor
de agua en forma manual.
5. Abrir el grifo. Si ocurre un escape,
ajuste más firmemente.
Product trickles in up position to relieve
water pressure, turn off faucet at handle.
El producto gotea en la posición de arriba
para aliviar la presión del agua, en la
manija el grifo.
Choose green with NEOPERLs
water saving faucet aerators
Elija verde con los aireadores
del grifo del ahorro del agua
de NEOPERL
1.5 gpm
Manufacturer assumes no responsibility
for damages due to improper installation.
©2011 NEOPERL, Inc. All rights reserved.
El fabricante no asume responsabilidad
alguna de los daños debido a la instalación
inadecuada. ©2011 NEOPERL, Inc. Todo los
derechos reservados.
Certified by
IAPMO R&T
  • Page 1 1

Bubble-Stream 37.0126.98 Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages