KitchenAid W10216167A User manual

Brand: KitchenAid

Model: W10216167A

Category: Dishwashers

Type: User manual

INSTALLATION INSTRUCTIONS

DRAWER DISHWASHER

INSTRUCCIONES DE INSTALACIÓN

DE LA LAVAVAJILLAS DE CAJÓN

INSTRUCTIONS D’INSTALLATION

LAVE-VAISSELLE À DOUBLE TIROIR

Table of Contents/Índice/Table des matières..................................................................2

IMPORTANT:

Save for local electrical inspector's use.

Installer: Leave installation instructions with the homeowner.

Homeowner: Keep installation instructions for future reference.

IMPORTANTE:

Guarde para tenerlas a disposición del inspector de electricidad local.

Instalador: Deje las instrucciones de instalación con el propietario.

Propietario: Conserve las instrucciones de instalación para referencia futura.

IMPORTANT :

Conserver pour consultation par l'inspecteur local des installations électriques.

Installateur : Remettre les instructions d'installation au propriétaire.

Propriétaire : Conserver les instructions d'installation pour référence ultérieure.

W10216167A

TABLE OF CONTENTS

DISHWASHER SAFETY...........................................................................3

INSTALLATION REQUIREMENTS .........................................................4

Electrical Requirements........................................................................6

Drain Requirements ..............................................................................6

INSTALLATION INSTRUCTIONS ...........................................................7

Unpack Dish Drawer.............................................................................7

Prepare Cabinet Opening.....................................................................7

PREPARE DISHWASHER .......................................................................8

Route Electrical Wiring..........................................................................9

Route Water Supply Line and Drain Hose............................................9

Connect Water Supply Line and Drain Hoses ...................................10

Make Electrical Connection................................................................12

Install Trim Pieces and Level Dishwasher..........................................13

Secure the Dish Drawers....................................................................14

Complete Installation..........................................................................15

CUSTOM PANEL INSTALLATION INSTRUCTIONS ..........................16

Preparing Custom Panels...................................................................16

Install Panel Fasteners........................................................................17

Mount the Custom Panel....................................................................17

ÍNDICE

SEGURIDAD DE LA LAVAVAJILLAS ...................................................18

REQUISITOS DE INSTALACIÓN ..........................................................19

Requisitos del suministro de agua .....................................................20

Requisitos eléctricos...........................................................................21

Requisitos de desagüe .......................................................................22

INSTRUCCIONES DE INSTALACIÓN..................................................22

Desempaque el cajón para platos......................................................22

Prepare la abertura del armario..........................................................22

PREPARE LA LAVAVAJILLAS..............................................................23

Dirija el cableado eléctrico..................................................................24

Dirija la línea de suministro de agua y la manguera de desagüe.......25

Conecte la línea de suministro de agua y las

mangueras de desagüe......................................................................26

Conexión del suministro eléctrico ......................................................27

Instale las piezas del marco y nivele la lavavajillas ............................28

Cómo asegurar los cajones de lavado...............................................30

Complete la instalación ......................................................................31

INSTRUCCIONES DE INSTALACIÓN DE LOS

PANELES A LA MEDIDA.......................................................................32

Paneles de los cajones a la medida...................................................32

Preparación de los paneles a la medida............................................32

Cómo instalar los sujetadores del panel ............................................33

Cómo montar el panel a la medida ....................................................33

TABLE DES MATÈRES

SÉCURITÉ DU LAVE-VAISSELLE ........................................................34

EXIGENCES D'INSTALLATION ............................................................35

Exigences d’emplacement .................................................................36

Spécifications de l'alimentation en eau..............................................36

Spécifications électriques...................................................................37

Spécifications de la vidange...............................................................37

INSTRUCTIONS D’INSTALLATION .....................................................38

Déballer le tiroir à vaisselle .................................................................38

Aménagement de la cavité d'encastrement du placard ....................38

PRÉPARATION DU

LAVE-VAISSELLE ..................................................................................39

Acheminement du câblage électrique................................................40

Acheminement du conduit d'alimentation

en eau et du tuyau de vidange ...........................................................41

Raccordement du conduit d'alimentation en

eau et des tuyaux de vidange ............................................................42

Raccordement électrique ...................................................................43

Installation des garnitures et réglage de

l'aplomb du lave-vaisselle ..................................................................44

Fixation des tiroirs à lave-vaisselle.....................................................46

Achever l'installation...........................................................................47

INSTRUCTIONS D'INSTALLATION DU

PANNEAU PERSONNALISÉS ..............................................................47

Préparation des panneaux personnalisés..........................................48

Installation des dispositifs de fixation de panneau ............................48

Montage du panneau personnalisé........................................................48

DISHWASHER SAFETY

You need to:

■ Slowly open dishwasher drawer while someone grasps the

rear of the dishwasher. Remove shipping materials. Close

dishwasher drawer. Latch the dishwasher drawer shut.

■ Observe all governing codes and ordinances.

■ Install this dishwasher as specified in these instructions.

■ Have everything you need to properly install dishwasher.

■ Contact a qualified installer to ensure that dishwasher is

installed to meet all electrical and plumbing national and local

codes and ordinances.

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

WARNING: When using the dishwasher, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

■ Read all instructions before using the dishwasher.

■ Use the dishwasher only for its intended function.

■ Use only detergents or rinse agents recommended for use

in a dishwasher, and keep them out of the reach of children.

■ When loading items to be washed:

1) Locate sharp items so that they are not likely to damage

the door seal; and

2) Load sharp knives with the handles up to reduce the risk

of cut-type injuries.

■ Do not wash plastic items unless they are marked

“dishwasher safe” or the equivalent. For plastic items not so

marked, check the manufacturer's recommendations.

■ Do not touch the heating element during or immediately

after use.

■ Do not operate the dishwasher unless all enclosure panels

are properly in place.

■ Do not tamper with controls.

■ Do not abuse, sit on, or stand on the door, lid, or dish racks

of the dishwasher.

■ To reduce the risk of injury, do not allow children to play in

or on the dishwasher.

■ Under certain conditions, hydrogen gas may be produced in

a hot water system that has not been used for two weeks or

more. HYDROGEN GAS IS EXPLOSIVE. If the hot water

system has not been used for such a period, before using

the dishwasher turn on all hot water faucets and let the

water flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is flammable,

do not smoke or use an open flame during this time.

■ Remove the door or lid to the washing compartment

when removing an old dishwasher from service or

discarding it.

Tip Over Hazard

Do not open dishwasher drawer until inside cabinet opening.

Doing so can result in death or serious injury.

WARNING

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

Too ls needed

Parts needed

Parts Supplied

Check that all parts are included.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Failure to meet codes and ordinances could lead to fire or

electrical shock.

Proper installation is your responsibility.

■ Contact a qualified installer to ensure that the dishwasher is

installed to meet all electrical and plumbing national and local

codes and ordinances.

■ Install the dishwasher as specified in these instructions.

■ Have everything you need to properly install dishwasher.

■ Keep the dishwasher and water lines leading to dishwasher

from freezing. Damage from freezing is not covered by the

warranty.

■ This dishwasher is manufactured for indoor use only.

■ Install and level dishwasher on a floor that will hold the weight,

and in an area suitable for its size and use.

■ Pliers

■ Phillips screwdriver

■ Flat-blade screwdriver

■ ³⁄₁₆" and ¼" nut drivers or

hex sockets

■ Measuring tape or ruler

■ 1½" hole saw bit

■ 10" adjustable wrench

■ Utility knife

■ Level

■ Electric drill

■ ¹⁄₈" drill bit

■ Security T-20 TORX

®†

driver (if installing custom

front panels)

A. 72" (182.9 cm) flexible water supply line

B. Zip tie

C. Appropriate sized UL listed wire connectors (2)

D. Handle (if installing custom front panels)

E. Custom panel (if installing custom front panels)

†®TORX is a registered trademark of Acument Intellectual Properties, LLC

³⁄₄

" UL listed strain relief

B. 1.25" hose clamp

C. Mounting bracket screws (8)

D. Unit mounting screws (4)

E. Y drain connector

F. Mounting brackets (4)

G. Drain connector spring

clamps (2)

H. Trim strips (2)

I. Toe kick brackets (2)

J. Toe kick bracket screws (2)

K. Toe kick trim

L. Panel fasteners (on some

models [2])

M. TORX

®†

screws (on some

models [10])

E F

Product Dimensions Installation Clearances

Cutout dimensions

Preferred utililty area

NOTE: All holes should be drilled at 1½" (3.8 cm) diameter.

Water Supply Requirements

■ A hot water line with 20-120 psi (138-862 kPa) water pressure.

■ 120°F (49°C) water temperature at dishwasher.

■ Flexible stainless steel braided fill line (½" minimum plastic

tubing is not recommended).

23³⁄₈"

(59.5 cm)

¹⁄₄"

(48.9 cm)

¹⁄₂"

(3.75 cm)

24"

(61 cm)

33³⁄₄"

(85.7 cm)

A. Choose left-hand or right-hand drain and water connection route.

B. Choose left-hand or right-hand electric connection route.

23¹⁄₂"

24"

(61 cm)

33³⁄₄"

(85.7 cm)

(59.7 cm)

25"

(63.5 cm)

(20.3 cm)

¹⁄₂"

(1.3 cm)

Electrical Requirements

Contact a qualified electrician.

Ensure that the electrical installation is adequate and in

conformance with all national and local codes and ordinances.

You must have:

■ 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply.

■ Copper wire only.

We recommend:

■ A time-delay fuse or circuit breaker.

■ A separate circuit.

If direct wiring dishwasher:

■ Use flexible, armored or nonmetallic sheathed, copper wire

with grounding wire that meets the wiring requirements for

your home and local codes and ordinances.

■ Use strain relief method provided with house wiring junction

box or install a UL-listed/CSA-certified clamp connector to the

house wiring junction box. If using conduit, use a

UL-listed/CSA-certified conduit connector.

If connecting dishwasher with a power supply cord:

■ Use Power Supply Cord Kit (Part Number 4317824) marked

for use with dishwashers. Kit contents include:

■ Voltex, Inc., UL listed 16 gauge 3 wire power supply cord

with 3 prong grounded plug.

■ Neer C-500 ⁷⁄₈" strain relief.

■ 3 wire connectors.

■ Part No. 302797 grommet.

Follow the kit instructions for installing the power supply cord.

■ Power supply cord must plug into a mating three prong,

grounded outlet, located in the cabinet next to the dishwasher

opening. Outlet must meet all local codes and ordinances.

IMPORTANT: If you plan to install a garbage disposer, an

additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused

electrical supply is required.

Drain Requirements

■ Use the new drain hose supplied with your dishwasher. If this

is not long enough, use a new drain hose with maximum

length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test

standards, is resistant to heat and detergent, and fits the

1" (2.5 cm) drain connector of the dishwasher.

■ Connect drain hose to waste tee or disposer inlet above drain

trap in house plumbing and 20" (50.8 cm) minimum above the

floor. It is recommended that the drain hose either be looped

up and securely fastened to the underside of the counter, or

be connected to an air gap.

■ Use a drain air gap if the drain hose is connected to house

plumbing lower than 20" (50.8 cm) above the subfloor or floor.

■ Use ½" (1.3 cm) minimum I.D. drain line fittings.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

WARNING

■

For a grounded, cord-connected dishwasher:

The dishwasher must be grounded. In the event of a

malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least

resistance for electric current. The dishwasher is

equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be

plugged into an appropriate outlet that is installed and

grounded in accordance with all local codes and

ordinances.

WARNING: Improper connection of the

equipment-grounding conductor can result in a risk of

electric shock. Check with a qualified electrician or

service representative if you are in doubt whether the

dishwasher is properly grounded. Do not modify the

plug provided with the dishwasher; if it will not fit the

outlet, have a proper outlet installed by a qualified

electrician.

■

For a permanently connected dishwasher:

The dishwasher must be connected to a grounded

metal, permanent wiring system, or an equipment-

grounding conductor must be run with the circuit

conductors and connected to the equipment-

grounding terminal or lead on the dishwasher.

GROUNDING INSTRUCTIONS

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

1. Disconnect power.

2. Turn off water supply.

Unpack Dish Drawer

1. Read valuable information on exterior of shipping box before

opening.

2. Remove shipping materials, tape and film from the

dishwasher. Remove parts package from inside the

dishwasher.

Prepare Cabinet Opening

1. To ensure minimum clearance dimensions exist:

■ Measure the distance from the cabinet countertop to the

floor and ensure 33³⁄₄" (85.7 cm) minimum height.

■ Measure the distance from the front of the cabinet to the

back wall and ensure 24" (61 cm) minimum depth.

■ Measure the distance from the left-hand side to the right-

hand side of opening and ensure 23½" (59.7 cm) minimum

width.

2. Drill 1½" (3.8 cm) diameter holes for drain and water hoses

and electrical wiring as shown. Holes should be placed

½" (1.3 cm) from back wall.

3. Install mounting brackets 17" (43.2 cm) from floor using

screws provided. If needed, drill ¹⁄₈" pilot holes in cabinet.

4. Decide which dishwasher-to-counter attachment method will

be used.

WARNING

Disconnect electrical power at the fuse box or circuit

breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Electrical Shock Hazard

WARNING

Excessive Weight Hazard

Use two or more people to move and install

dishwasher.

Failure to do so can result in back or other injury.

A. Choose left-hand or right-hand drain and water hose route.

B. Choose left-hand or right-hand electric wire route.

25"

(63.5 cm)

(20.3 cm)

¹⁄₂"

(1.3 cm)

17"

(43.2 cm)

Option 1: Solid surface countertop installation

■ Install second set of mounting brackets 33½" (85 cm) from

floor. If needed, drill ¹⁄₈" pilot holes in cabinet.

Option 2: Wood countertop installation

■ Prepare dishwasher by folding over tabs located on the top

front as shown.

PREPARE DISHWASHER

1. Measure cabinet opening height from floor to bottom of

countertop.

2. Place corner packaging on the floor and place dishwasher on

its back.

3. Adjust leveling legs based on the cabinet opening

measurement and the chart below.

33¹⁄₂"

(85 cm)

Tip Over Hazard

Do not open dishwasher drawer until inside cabinet

opening.

Doing so can result in death or serious injury.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

dishwasher.

Failure to do so can result in back or other injury.

4. Place dishwasher in upright position.

Route Electrical Wiring

Follow all national and local codes and ordinances for completing

electrical supply to cabinet.

Option 1: Right-hand side utility route

After routing the electrical wire through the right-hand hole, attach

the wire to back left-hand side of cabinet wall 8" (20.32 cm) above

the floor. Then continue routing the wire along the left-hand side of

cabinet opening to the front of the opening.

Option 2: Left-hand side utility route

After routing the electrical wire through the left-hand hole,

continue routing the wire along the left-hand side of cabinet to the

front of the opening.

Route Water Supply Line and Drain Hose

1. Connect water supply line to water valve on dishwasher.

2. Route water supply line and drain hoses based on your

cabinet requirements.

H : X H : X

³⁄₄

" (85.7 cm) : 0" 34

¹⁄₂

" (87.6 cm) :

⁵⁄₈

" (1.6 cm)

34" (86.3 cm) :

¹⁄₈

" (0.3 cm) 34

⁵⁄₈

" (87.9 cm) :

³⁄₄

" (1.9 cm)

¹⁄₈

" (86.7 cm) :¼" (0.6 cm) 34

³⁄₄

" (88.3 cm) :

⁷⁄₈

" (2.2 cm)

¹⁄₄

" (87 cm) :

³⁄₈

" (1 cm) 34

⁷⁄₈

" (88.6 cm) :1" (2.5 cm)

³⁄₈

" (87.3 cm) :½" (1.3 cm) 35" (88.9 cm) :1

¹⁄₈

" (2.9 cm)

Route wire through 1½" (3.81 cm) hole

located 8" (20.32 cm) above the floor.

WARNING

Disconnect electrical power at the fuse box or circuit

breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Electrical Shock Hazard

Route wire through 1½" (3.81 cm) hole

located 8" (20.32 cm) above the floor.

Option 1: Right-hand side utility access

■ For right-hand routing, drain hoses are shipped in the correct

position. Place the water supply line in the clip as shown.

Option 2: Left-hand side utility access

■ For left-hand routing, remove drain hoses from the clips in the

rear bracket as shown.

■ Route water supply line and drain hoses into the cabinet.

■ Slide dishwasher partway into the cabinet opening. Allow for

access to the electrical terminal box.

Connect Water Supply Line and Drain

Hoses

1. Connect water supply line to the water valve under the sink.

2. Slide clamps onto drain hoses (Figure A). Do not cut drain

hoses.

3. Push hoses into Y drain connector until fully seated (Figure B).

Several “clicks” will be heard.

4. Slide clamps into position (figures C and D).

A. Hot water supply

5. Connect the drain hose using one of the following options:

Option 1: Waste disposer no drain air gap

Option 2: No waste disposer and drain air gap

Option 3: Waste disposer and drain air gap

Option 4: No waste disposer, no drain air gap

NOTE: Attach the drain hose connector to the water waste

line using the supplied hose clamp.

6. Turn on water and check for leaks.

A. For new construction, remove disposer plug.

B. Connect drain connector to waste disposer.

C. Tighten clamp.

A. Drain hose connector

B. Drain air gap

C. Waste

A. Drain hose connector

B. Drain air gap

C. Waste

A. Drain hose connector

B. Cut drain connector

C. Waste

Make Electrical Connection

1. Remove screw securing the electrical box cover. Remove

cover.

2. Route electrical wires through strain relief and secure to

electrical plate.

3. Connect wires as follows using twist-on connectors sized to

connect direct wire to 16 gauge dishwasher wire.

4. Attach ground wire to the green ground screw.

WARNING

Disconnect electrical power at the fuse box or circuit

breaker box before installing dishwasher.

Failure to do so can result in death or electrical shock.

Electrical Shock Hazard

Power supply wire: Terminal box wire:

white white

black black

ground wire ground connector

A. Attach ground wire to green screw.

B. Attach white and black wires.

WARNING

Electrical Shock Hazard

Electrically ground dishwasher.

Connect ground wire to green ground connector in

terminal box.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

5. Reinstall electric box cover with all wires contained inside the

terminal box.

Install Trim Pieces and Level Dishwasher

1. Open bottom drawer.

2. Push in clips and slide rails back 5" (12.7 cm).

3. Lift drawer off slide rails. Place drawer off to the left on

covering. Slide rails into dishwasher.

4. Slide the dishwasher into position in the cabinet opening.

Check to ensure that the drain hose and electrical wiring are

not kinked.

5. Check left to right level by placing the level on the top of the

drawer. Check front to back level by placing level on the slide

rails.

6. Adjust legs with a ³⁄₁₆" socket wrench to level the dishwasher.

7. Rest trim strip on floor and mark trim at the top of the frame

flange height. Pick the closest groove to the mark. If the mark

is between two grooves, choose the groove that makes the

trim strip the shortest. On a covered surface, cut the trim strip

at the selected groove. Pull dishwasher back out of cabinet

opening about 6" (15.24 cm).

A. Adjust legs.

8. Attach the toe kick bracket to the frame.

9. Place trim strip into toe kick bracket.

10. Attach toe kick bracket on the opposite side.

11. Place flexible side trim strips on both sides as shown.

12. Slide the dishwasher back into position in the cabinet

opening. Check to ensure that the drain hose and electrical

wiring are not kinked.

Secure the Dish Drawers

1. Remove top drawer (same procedure as followed to remove

bottom drawer) and set drawer on bottom drawer separated

with corner packaging.

2. Attach dishwasher to the lower cabinet mounting bracket

(installed earlier).

A. Attach dishwasher to lower cabinet mounting bracket.

3. Attach dishwasher to upper cabinet mounting brackets.

Option 1: Solid surface countertop

■ Attach dishwasher to the side cabinet mounting brackets

(installed earlier).

Option 2: Wood countertop

■ Attach the dishwasher to the countertop using the folded over

mounting tabs located on the top of the dishwasher.

Complete Installation

1. Pull top drawer slide rails out and set top drawer on slide rails.

2. Pull slide rails forward until they snap into position.

3. Push top drawer in and repeat above steps for bottom drawer.

4. In the cabinet under the sink, coil excess drain hose and wrap

with a zip tie. Plug in dishwasher or reconnect the power.

5. Select the Rinse Only cycle and press START/RESUME. Allow

the dishwasher to fill, rinse and drain. Check for leaks. If leaks

are found, secure the connection and repeat this step.

If you need Assistance or Service:

Please reference the “Assistance or Service” section of the User

Instructions or contact the dealer from whom you purchased your

dishwasher.

A. Attach dishwasher to side cabinet mounting brackets.

A. Attach dishwasher to countertop using folded over mounting tabs.

OFF

CUSTOM PANEL INSTALLATION INSTRUCTIONS

Custom Drawer Panels

If you plan to install a custom wood panels, you will need to create

the panels yourself or consult a qualified cabinetmaker or

carpenter. See dimension drawings for panel specifications.

IMPORTANT:

■ The thickness of the custom panel must be ¹⁄₂" (12.7 mm) to

³⁄₄" (19.05 mm).

■ Do not exceed the height dimension for the custom panel(s).

Panel(s) that exceed the height dimension may damage the

drawer dishwasher, cabinets or countertop.

■ The width of the custom panel(s) may vary according to the

width of the cabinet opening.

Custom Panel Dimensions

Upper drawer panel

Lower drawer panel

Hardware Installation

Center the hardware (left to right) onto the custom panel. When

installing the hardware, be sure that the mounting screws are flush

with the back of the custom panel(s).

Preparing Custom Panels

1. Lay the custom panels (top and bottom) face down on a

clean, soft work surface.

2. Using a pencil, mark the centerpoints for the 2 panel fastener

pilot holes and 6 pilot holes needed for the upper panel.

3. Mark the centerpoints for the 2 panel fastener pilot holes and

4 pilot holes need for the lower panel.

4. Using a ¹⁄₈" drill, drill each hole ³⁄₈" (1cm) deep.

IMPORTANT: To avoid drilling through to the front of the

custom panel, do not drill deeper than ³⁄₈" (1 cm).

23⁷⁄₁₆"

(59.5 cm)

16¹⁄₄"

(41.3 cm)

³⁄₄"

(1.9 cm)

12³⁄₄"

(61 cm)

23⁷⁄₁₆"

(59.5 cm)

³⁄₄"

(1.9 cm)

A. Center line

B. Panel fastener pilot holes (2)

C. Pilot holes (6)

A. Center line

B. Panel fastener pilot holes (2)

C. Pilot holes (4)

1¹⁄₂"

(3.8 cm)

(20.7 cm)

8¹⁄₈"

(20.7 cm)

(20.2 cm)

(36.6 cm)

(28.5 cm)

11¹⁄₄"

(28.5 cm)

2¹⁄₂"

(6.3 cm)

11¹⁄₄"

8¹⁄₈"

14¹⁄₈"

10¹⁄₂"

(26.7 c

(20.7 cm)

8¹⁄₈"

(20.7 cm)

8¹⁄₈"

(28.5 cm)

11¹⁄₄"

(28.5 cm)

11¹⁄₄"

1¹⁄₂"

(3.8 cm)

2¹⁄₂"

(

6.3 cm)

³⁄₈" (2 cm)

Install Panel Fasteners

1. Remove the two panel fasteners from the face of the inner

door of the upper drawer.

2. Screw the two panel fasteners into the panel fastener pilot

holes of the custom panel.

3. Repeat steps 1 and 2 for the lower drawer.

Mount the Custom Panel

1. Mount the upper custom panel to the drawer by aligning the

panel fasteners to the two keyhole slots and insert the panel.

2. To secure the custom panel onto the drawer, push the custom

panel down until the top of the custom panel is flush with the

top of the control panel.

3. Using the screws provided, secure the custom panel to the

inner door by screwing through the inner door and into the ¹⁄₈"

(3.175 mm) pilot holes.

4. Repeat steps 1 to 3 for the lower drawer.

NOTE: There will only be 4 pilot holes (2 on the left and 2 on

the right) for the lower drawer.

Page is loading ...

placard.

Option 2 : Installation du plan de travail en bois

■ Préparer le lave-vaisselle en repliant les languettes situées sur

la partie supérieure tel qu'illustré.

PRÉPARATION DU

LAVE-VAISSELLE

1. Mesurer la hauteur de la cavité d'encastrement du placard, du

sol au-dessous du plan de travail.

2. Placer l'emballage des coins du lave-vaisselle sur le sol et

coucher le lave-vaisselle sur le 2.

33¹⁄₂"

(85 cm)

Tip Over Hazard

Do not open dishwasher drawer until inside cabinet

opening.

Doing so can result in death or serious injury.

WARNING

Excessive Weight Hazard

Use two or more people to move and install

dishwasher.

Failure to do so can result in back or other injury.

Page is loading ...

W10216167A

® Registered Trademark/TM Trademark of KitchenAid, U.S.A., KitchenAid Canada licensee in Canada

® Marca registrada/TM Marca de comercio de KitchenAid, U.S.A., usada en Canadá bajo licencia de KitchenAid Canada

® Marque déposée/TM Marque de commerce de KitchenAid, U.S.A., Emploi sous licence par KitchenAid Canada au Canada

10/08

Printed in U.S.A.

Impreso en EE.UU.

Imprimé aux É.-U.

KitchenAid W10216167A User manual

Brand: KitchenAid

Model: W10216167A

Category: Dishwashers

Type: User manual

Download PDF

report

in other languages

français: KitchenAid W10216167A Manuel utilisateur
español: KitchenAid W10216167A Manual de usuario

KitchenAid W10216167A User manual

KitchenAid W10216167A User manual

in other languages

Related papers

Other documents