104 x 142 mm
13
holder,rstfoldingdowntheperforated
sidesofthelter.
∙ Filling with ground coffee:
For each regular-sized cup (125 ml), a
measure of about 6 g (= 1½ - 2 teaspoons)
ofmediumornelygroundcoffeewill
berequired.Closetheswing-outlter
afterwards.
∙ Preparing the glass carafe:
Fit the aroma protection lid onto the
carafe, and then place the carafe into the
appliance. If correctly inserted, the lid will
disablethedrip-stopmechanisminthelter
holder during the brewing cycle.
∙ Starting the brewing cycle:
Insert the plug into a suitable wall socket
and use the On/Off switch to turn the
coffeemakeron.Theltrationcyclestarts
andthewaterpassesthroughthelter.
∙ Removing the glass carafe:
Wait until all the water has passed through
thelterbeforethecarafeisremovedfrom
the appliance.
∙ Switching off the coffee maker:
The coffee may be kept warm inside the
carafe by leaving it standing on the hot-
plate. Once the last cup has been poured,
press to switch the coffee maker off.
Unless the appliance is switched off
manually, the hot-plate remains hot for
around 35 minutes after the brewing
cycle, when the appliance will switch itself
off automatically. Always switch off the
appliance after use and remove the plug
from the wall socket.
Cleaning and care
∙ Before cleaning the appliance, ensure it
is disconnected from the power supply
and has cooled down completely.
∙ To avoid any risk of electric shock, do
not clean the coffee maker with liquids
or immerse it in a liquid. The appliance
may be cleaned with a slightly damp
cloth, using a mild detergent. Wipe dry
afterwards.
∙ Do not use abrasives or harsh cleaning
solutions.
∙ To remove the coffee grounds, open
theswing-outlterandliftoutthelter
insert. Dispose of the coffee grounds
(as a natural substance, they may be
composted).
∙ Rinseoutthelterinsert,wipeitdryand
replace it.
∙ Closetheswing-outlter.
∙ Thecarafewithlidandthelterinsert
may be cleaned with warm water or in a
dishwasher after use.
∙ For easy cleaning, open the carafe lid
and remove it by pulling it up. Replace it
after cleaning, applying light pressure.
Descaling
∙ Depending on the water quality (lime
content) in your area as well as the
frequency of use, all thermal household
appliances using hot water need
descaling (i.e. removal of lime deposits)
on a regular basis to warrant proper
functioning.
∙ Any warranty claim will be null and
void if the appliance malfunctions
because of insufcient descaling.
∙ A lengthening of the brewing time,