XtremeMac ipu-lss-11 User manual

Page is loading ...

Contents

04 English

10 Française

17 Italiano

24 Deutsch

31 Español

38 Português

4

5

Congratulations on your purchase!

Thank you for purchasing Luna SST dual alarm

clock with detachable speaker. The following pages

explain the features and operation of Luna SST, so

please take a few moments to read through

this manual.

For a customized waking experience and full

integration with this product, download the free

XtremeMac alarm clock app from the iTunes

App Store.

Note: app only works with iPhone and iPod touch models.

Package contents:

 

 

 

 

 

 

 



ImPortant

Please read all safety instructions before proceeding. The

answers to most set up and performance questions can be

found in this manual or in the Troubleshooting Tips. If you have

any further questions about the operation or use of this product

please contact our consumer care team for assistance before

returning it to the place of purchase.

customer servIce

Email:

support@xtrememac.com

Telephone number:

1-866-392-9800 (Toll free within the United States)

Hours of operation:

Monday through Friday, 12pm – 9pm EST

ProDuct saFetY

When used in the directed manner, this unit has been designed

and manufactured to ensure your personal safety. However,

improper use can result in potential electrical shock or ﬁre

hazards. Please read all safety and operating instructions

carefully before installation and use, and keep these

instructions handy for future reference.

The lightning ﬂash with arrowhead, within an

equilateral triangle, is intended to alert the

user to the presence of uninsulated "dangerous

voltage" within the product’s enclosure that

may be of sufﬁcient magnitude to constitute a

risk of electric shock to persons.

Caution: To prevent the risk of electric shock,

do not remove cover (or back). No user-

serviceable parts inside. Refer servicing to

qualiﬁed service personnel.

The exclamation point within an equilateral

triangle is intended to alert the user to

the presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

CAUTION: To prevent electric shock do not use this (polarized)

plug with an extension cord, receptacle or other outlet unless

the blades can be fully inserted to prevent blade exposure.

WARNING: To reduce the risk of ﬁre or electric shock, do not

expose this appliance to rain or moisture.

ImPortant saFetY InstructIons

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water - This apparatus shall

not be exposed to dripping or splashing, and no objects

ﬁlled with liquids, such as vases, shall be placed on the

apparatus.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions. The apparatus should

not be situated on a bed, sofa, rug or similar surface that

may block the ventilation openings.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliﬁers)

that produce heat.

9. No naked ﬂame sources, such as lighted candles, should be

placed on the apparatus.

10. Protect the power cord from being walked on or pinched—

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Do not install in an area which impedes the access to the

power plug. Disconnecting the power plug is the only way

to completely remove power to the product and must be

readily accessible at all times.

12. Power source—Use only the power supply that is included

with this unit. Do not substitute with any other power

supply.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped. For service, refer to

qualiﬁed service personnel, return to the dealer, or call the

XtremeMac service line for assistance.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This class B digital apparatus complies with Canadian ICES-003.

gettIng starteD

1. Remove unit and AC adapter from the box and properly

dispose of any plastic or foam packaging material. Gently

peel off the protective ﬁlm from the center of unit.

2. Place unit on a level surface close to a power outlet

following the precautions listed in the safety warnings.

3. Open battery compartment cover on the bottom of the

unit by sliding it back and lifting up the edge without the

perforated dots. Insert on 3 AAA batteries for alarm and time

backup and close cover.

4

6

7

1

14

3

2

3

4

5

8

9

3

7

6

22

1 2 3 4

1 1 8

3 5

5

6

7

4

2

usIng Luna sst wIth sPeaker connecteD

1. Untie and extend the FM antenna connected on the back of

the unit for best reception.

2. If located in the US, skip to step 5. If located outside the US,

select the appropriate wall adapter. If already attached to

the unit, skip to step 5.

3. Using a small object like a pen, press the button under the

wall adapter to release the adapter.

4. Gently slide in the appropriate wall adapter. You will hear a

click when it is properly locked into place.

5. Connect the AC adapter jack to the back of the unit labeled

12V and then connect the other end of the adapter to a

power outlet.

usIng Luna sst wIth the sPeaker DetacheD

PLace sPeaker uP to 10 Feet/3 meters awaY From maIn unIt

1. Gently turn over the unit with the display and speakers

facing toward you.

2. Remove shorter speaker cable from the jacks by pushing in

the tab and pulling up. Repeat on other end and put cable in

a safe spot for reconnecting at a later date.

3. Connect longer speaker cable to the jacks on the bottom of

the unit by inserting the cable until you hear a click.

4. With the unit display facing toward you, gently slide the

right speaker toward you and pull outward.

5. Remove the two brackets on the speaker or unit by gently

sliding to unlock and pulling outward. Keep brackets in a

safe place for reconnecting.

6. Turn main unit upright and place back on a ﬂat surface close

to a power outlet. Place the detachable wired speaker on a

ﬂat surface up to 10 feet /3 meters away.

7. Untie and extend the FM antenna connected on the back of

the unit for best reception.

8. If located in the US, skip to step 11. If located outside the

US, select the appropriate wall adapter. If already attached

to the unit, skip to step 11.

9. Using a small object like a pen, press the button under the

wall adapter to release the adapter.

10. Gently slide in the appropriate wall adapter. You will hear a

click when it is properly locked into place.

11. Connect the AC adapter jack to the back of the unit labeled

12V and then connect the other end of the adapter to a

power outlet.

Note: For an enhanced and customized waking experience, don’t forget to

download the XtremeMac alarm clock app from the iTunes App Store to your

iPhone or iPod touch device.

reconnectIng the sPeaker

1. Unplug the AC adapter from the power outlet.

2. Bring detachable speaker closer to the main unit and

remove the speaker cable on the bottom of the unit.

3. With the unit display facing toward you, place the two

brackets (one on the top of the unit and one on the bottom)

into the main unit by sliding and locking into place.

4. With the speaker facing you, line up the dot on the bottom

center of the main unit with the dot on the bottom center of

the detachable speaker and gently slide back into place.

5. Connect the shorter speaker cable to the jacks on the

bottom of the unit and set the SST switch on the back of the

unit to off.

6. Connect the AC adapter jack to the back of the unit labeled

12V and then connect the other end of the adapter to a

power outlet.

settIng the tIme wIth Your IPoD or IPhone

Make sure the switch on the back of the unit is set to “Auto.”

Dock your iPod or iPhone and the unit will automatically pull

the time from your device.

To change the time to 24 hour time, press and hold the source

button. The display will blink with 12 or 24 hour time mode. Turn

the control knob to choose 24 hour and press to conﬁrm

the setting.

settIng the tIme manuaLLY

1. Make sure the switch on the back of the unit is set to "Set".

2. Press and hold the source button. The display will blink with

12 or 24 hour time mode. Turn the control knob to choose

between 12 hour and 24 hour time and press the control

to set. The display will then advance to set the time.

3. Turn the control knob to change the hour, AM or PM in 12

1. LED display

2. Control knob - volume / snooze /

FM frequency

3. Play/pause controls

4. Source control

5. Alarm/FM radio presets

6. Detachable speaker – Alarm 1 sound

7. Snooze and Alarm 1 on/off control

8. Alarm 2 sound (attached speaker)

1. SST I OFF switch

2. Set clock switch

3. AUX in jack

4. 12V - 2A power jack

1. Battery compartment

2. Speaker cable jack

3. Detachable speaker alignment dots

4. Speaker brackets

1. Power button

2. Source

3. Volume controls

4. Play / pause

5. Next / previous track

6. Bass controls

7. Treble controls

8. Alarm / FM radio presets

9. Snooze / nap / sleep control

8

9

2. Carefully place your device into the dock well.

3. Press play on the device or on the on the unit and use the

controls on the unit or the included remote to adjust

the volume.

LIstenIng to the Fm raDIo

1. Press the source button on the top of the unit until radio is

shown on the top of the display.

2. Turn the control knob or use the remote to change the

frequency. The tuning mode on the unit will time out after 5

seconds and the control knob will then control the volume.

Press the source button to enter back into tuning mode.

3. Use the control knob on the unit or use the remote to

control the volume.

settIng the raDIo Presets

1. When listening to the radio, use the control knob to tune to

the station you want to set as a preset.

2. Press and hold the preset button (alarm 1 or 2) on the unit or

on the remote until the corresponding number appears on

the display. Repeat for second preset.

3. To recall the radio presets, simply press the corresponding

preset button while in FM radio mode.

usIng the LIne-In jack

1. Connect a 3.5mm audio cable (available at www.xtrememac.

com) to the headphone or line out jack of an audio device

and plug the other end of the cable into the "Aux" jack on

the back of the unit.

2. Press the source button on the unit to Aux and press play

on the device. Use the controls on the unit or the device to

control the volume.

usIng the aLarm cLock aPP to set the aLarms

The XtremeMac alarm clock app will allow you to enhance and

customize your waking experience. You can set your alarms on

the go, specify snooze time, set volume ramping for the alarms

and much more.

1. Download the XtremeMac alarm clock app from the iTunes

App Store to your iPhone or iPod touch model.

2. Launch the app and customize your alarm settings.

3. When all settings are complete, dock your iPhone or iPod

touch and press the sync button for each alarm you would

like to sync with the unit. The unit is now set with the

updated alarm times.

troubLeshootIng tIPs

no Power

Check AC adapter connection

Connect the AC adapter into the jack in the back of Luna labeled

"Power" and then plug the AC adapter into the wall outlet.

Check wall outlet function

Plug another device into the same outlet to conﬁrm the outlet

is working.

no sounD From sPeakers

Check audio source

Push the source button on the top of the unit or on the remote

to select the desired audio source.

Check volume level

Turn the control knob or use the remote to adjust the volume.

Check iPod connection

Remove your iPod from the dock well and re-dock to make sure

it is properly connected.

Check the iPod/iPhone

Try restarting your device and then re-docking to ensure a

proper connection.

Poor Fm recePtIon

Check FM antenna

Untie and extend the FM antenna on the back of the unit. With

the FM radio on, play with the positioning of the antenna.

hour mode (indicated by an AM or PM on the right of the

time) and press to accept and advance to the minutes.

4. Turn the control knob to change the minutes and press to

accept. The time is now set.

settIng the aLarms

1. Press and hold the alarm 1 or alarm 2 button on the top of

the unit or on the remote. The display will show the alarm

time and the hour will blink.

2. Turn the control knob to change the hour and press to

accept and advance to the minutes.

3. Turn the control knob to change the minutes and press to

accept and advance to the wake to source. The source will

be displayed at the top of the display.

4. Turn the control knob to change the source (Chime, iPod/

iPhone, or radio) and press to accept and advance to set the

alarm volume level.

5. Turn the control knob to change the alarm volume level

(from 3 to 30) and press to accept. The alarm is now set.

6. Repeat process for second alarm.

turnIng on anD oFF the aLarm

To activate the alarm, press the alarm 1 or alarm 2 button on the

unit or the remote. Luna SST will show "Alarm 1" and/or

"Alarm 2" on the display to show that it is activated. If you

do not see the appropriate alarm on the display, press the

corresponding alarm button on the top of the unit or on the

remote to turn on the alarm. Press the corresponding alarm

button again to turn off the alarm.

Note: If the source is set to iPod/iPhone, select the track on your device that would

like to wake to otherwise the alarm will sound to the next song on your iPod.

If the source is set to radio, select a radio station that you would like to wake to

otherwise the alarm will sound to the last radio station played.

usIng the sst Feature

On the back of the unit set the switch to SST. This feature is

for using the detachable speaker for a companion or separate

sounding alarm. When activated, alarm 1 will sound only from

the detached speaker and alarm 2 will sound only from the

speaker on the main unit. If the alarm is set to chime, the buzzer

will sound from the bottom of the main unit only.

Note: When playing music, the music will play from both speakers for true stereo sound.

aDjustIng the DIsPLaY brIghtness

When music is not playing and the alarm is not sounding, simply

turn the control knob to adjust the display brightness.

When music is playing, press the control knob once and

"Dimmer" will appear on the display. Turn the control knob to

adjust the display brightness. The unit will time out after about

ﬁve seconds and return back to volume mode.

usIng the snooze/naP/sLeeP controL

To snooze: Alarm must be sounding.

Press the control knob on either the main unit or the snooze

button on the detachable speaker to snooze when the alarm

sounds. The default snooze time is 9 minutes, but can be

adjusted through the XtremeMac alarm clock app. To cancel the

snooze, turn off the alarm by pressing the corresponding alarm

button.

To Activate Nap Timer: No audio can be sounding

Press and hold the control knob until the nap timer appears on

the display. Turn the control knob to adjust the nap time from

1 – 120 minutes and press to set. The unit will sound with your

iPhone/iPod if docked or the buzzer if no device is docked. To

view and change remaining nap time, press the control knob

once and rotate the knob to adjust the duration.

Press and hold the control knob to cancel. "Nap" will disappear

from the display.

To Activate Sleep Timer: Audio must playing (other than from

an alarm)

Press and hold the control knob until the sleep timer appears on

the display. Turn the control knob to adjust the sleep time from

1 – 60 minutes and press to set. To view and adjust remaining

sleep time, press the control knob once and rotate the knob to

adjust the duration.

Press and hold the control knob to cancel. "Sleep" will disappear

from the display.

Note: Turning off the audio source will also turn off the sleep timer.

PLaYIng anD chargIng Your IPoD/IPhone

1. Use the insert designed for your iPhone or iPod and gently

press it into the universal dock well.

Page is loading ...

Made in China | Fabriqué en Chine. Designed in the USA. © Imation Corp. XtremeMac, Luna and the “X” logo are trademarks of Imation Corp.

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect speciﬁcally to iPod or iPhone,

respectively, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this

device or its compliance with safety and regulatory standards. iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple

Inc., registered in the U.S. and other countries.

Distributed by Imation Enterprises Corp., Oakdale, MN, USA. Imation shall not be liable for any lost data or incidental or consequential

damages related to this product.

Printed in China 05242010

XtremeMac.com

Imation Europe B.V., Siriusdreef 46-52, 2132 WT Hoofddorp, The Netherlands

XtremeMac ipu-lss-11 User manual

XtremeMac ipu-lss-11 User manual

in other languages

Related papers

Other documents