Monster SmartView 100S User manual

Category
Flat panel wall mounts
Type
User manual
USER GUIDE & WARRANTY
GUIDE ET GARANTIE DUTILISATEUR
GUÍA DEL USUARIO Y GARANTÍA
SmartView
100S
FlatScreen Mount
Support d’écran plat
Smart View
Base SmartView
100S
FlatScreen para
monitores planos
A NOTE FROM THE HEAD MONSTER
Dear Enthusiast,
THANK YOU
for purchasing the
Monster SmartView 100S FlatScreen
Mount. The SmartView 100S refl ects
our passion for creating the most
innovative and practical AV solutions
on the market, so enthusiasts like
yourself always experience the
absolute best from their high-
performance AV components. Monster FlatScreen
Mounts deliver the clean, sophisticated style you want,
plus ultimate ease of installation and industrial-strength
construction for optimum viewing in virtually any room.
Start enjoying TV on your terms—when, where and how
you want to watch.
Noel Lee,
The Head Monster
More Great Products
from Monster FlatScreen
The Look You Want. The Performance You Need.
Monster FlatScreen Cables
Ultra slim and exible, Monster FlatScreen
Cables ensure a clean, no-clutter hookup to
your thin display. Plus, they feature advanced
Monster Cable technologies, so you always get the
best possible picture and sound.
Monster FlatScreen PowerProtect
and PowerCenters
Safeguard your fl atscreen investment
from harmful electrical surges and
dirty AC power with exclusive Monster
Power
®
technologies, including Monster
®
technologies, including Monster
®
SurgeGuard
and Monster
Clean Power
.
Monster FlatScreen Clean
Our safe LCD and plasma cleaning solution
instantly removes dust, dirt and
ngerprints from your atscreen without
drips, stains or scratches.
For more details on all our Monster FlatScreen products,
visit us at
MonsterCable.com/FlatScreen
Monster Cable technologies, so you always get the
Monster FlatScreen Clean
Our safe LCD and plasma cleaning solution
1
SmartView
100S FlatScreen Mount
SmartView 100S is designed to mount
10"
to
24"
atscreen televisions to vertical walls. Maximum weight
capacity is
40 lbs.
SAFETY WARNING:
If you don’t understand these
directions, or have doubts about this product’s installation,
please call a qualifi ed contractor or contact Monster Cable
Products, Inc. at
1-877-800-8989.
Before installing, carefully review the instructions to
ensure that no parts are missing or defective. Improper
installation can cause damage or serious injury. Do not
use this product for any purpose not explicitly specifi ed
by Monster or the manufacturer. Neither Monster nor the
manufacturer can be liable for damage or injury caused
by incorrect assembly, incorrect mounting or incorrect use.
All hardware is supplied for the following wall conditions:
Wood stud, brick, solid concrete and concrete block.
Note:
The supplied hardware
is not for steel stud walls.
If you are uncertain about the nature of your wall
construction, consult an installation contractor.
2
Speci cations and Notes:











Monster is constantly striving to improve its products.
Specifi cations are subject to change without notice.
3
Required Tools
Wall Stud Mounting:
Electronic stud sensor
Level
Electric hand drill
3/16" drill bit
Phillips screwdriver
Combination wrenches or socket set
Masonry Mounting
(brick, concrete, concrete blocks):
Above tools
Replace 3/16" drill bit with 1/2" masonry drill bit
4
Package Contents
1 LCD Mounting Plate
(VESA 75/100-Compliant)
Screws
4 ea. M4x15
4 ea. M5x15
Bubble Level
2 Round
Washers
2 Lag Bolts
2 Masonry
Anchors
1 Wall Mounting Plate
Security Screw
1 M4x12
If any parts are missing, please call 800-877-8989.
5
Warnings
Forbidden Actions:
Do not install on a sloping surface. Install
exclusively on a vertical surface.
Do not mount to cabinetry made of particleboard.
Do not install in a room with excessively high
temperatures or high humidity. Install at least 3 ft.
from all water sources.
Do not install near an air conditioner.
Do not install in a location where there is excessive
dust, smoke or moisture. These sources can create
a re.
Never apply unnecessary stress or load
on the installed unit. Never hang on the unit.
Do not install unit alone. Safe installation requires
at least two people.
Do not route your fl atscreen TV’s power cord
in wall. Check local building/electrical codes
for more information.
6
Cautions
To prevent eye fatigue, do not install where there
is direct sunlight or excessive light.
When carrying out maintenance, disconnect
the TVs power supply to avoid electrical shock.
If planning to route AV cable in wall, only use cable
UL-certifi ed for this use.
7
Pre-Installation Checklist
Does your mounting location have at least
one wall stud?
Is your view of the mounting location free
of glare or other obstructions?
Is the location of your wall stud or masonry surface
suitable for repositioning your display?
Is your mounting location near an AC power
outlet? Ideally, the outlet should be behind your
TV. This will conceal your displays power cord.
Is your mounting location at least 3 ft. from
any source of heat or water?

To hide your TVs power cord, install a Monster
®
In-Wall PowerCenter
behind the placement
of your display.
®
®
®
®
®
8
Installing the Wall Mounting Plate
Remove all pieces of the wall mounting system to ensure
you have all necessary parts.
Wood Stud Mounting:
Using an electronic stud sensor, locate a wall stud
at your desired mounting location.
With the help of a friend, position the wall mounting
plate on the wall stud.


Suspend a straight edge, such as a ruler,
across the top of the mounting plate. Place the
provided level on the straight edge and con rm that
the wall plate is plumb or vertically straight. Hold the
plate fi rmly in place.
Mark the stud center in the top and bottom mounting
holes with a pencil. With your electrical drill and 3/16"
bit, pre-drill a 3" deep hole at each mark.
Attach the wall plate to the wall using the lag bolts
and round washers as shown to the right. Tighten
each bolt with your electric drill or socket wrench.
Turn clockwise until secure.
DO NOT over tighten bolts. This can damage
the wall plate or the surface of your wall.
DO NOT release the wall plate until you are
absolutely sure it is secured to the wall.
1)
2)
3)
4)
5)
9










10
Installing the Wall Plate
continued
Masonry Mounting
Masonry mounting requires specialized knowledge, skills
and tools. Monster highly recommends that you seek the
help of a professional installer when mounting to masonry.
DO NOT drill holes in masonry mortar joints.
With the help of a friend, position the mounting plate
in the desired location.


Suspend a straight edge, such as a ruler,
across the top of the mounting plate. Place the
provided level on the straight edge and con rm that
the wall plate is plumb or vertically straight. Hold the
plate fi rmly in place.
Mark the centers of the top and bottom center
mounting holes with a pencil. Be careful not to mark a
mortar joint. With your electrical drill and 1/2" masonry
bit, pre-drill a 3" deep hole at each mark.
Install the supplied plastic anchors in each hole.
Tap into hole until fully seated.
Attach the wall plate to the wall using the lag bolts
and round washers as shown on the opposite page.
DO NOT over tighten bolts. This can damage
the wall plate or the surface of your wall.
1)
2)
3)
4)
5)
11










12
Attaching Your LCD TV
to the TV Mounting Plate
Do not lay your TV face down when attaching
the TV mounting plate. This can cause permanent
damage to your screen. Lean it against a wall or
other solid surface so it remains vertically upright.
The television should be unplugged before
threading any bolt or screw into the back panel.
Your mounting system features two sets of screws, M4x15
and M5x15. The M5x15 is the thicker of the two.
Locate the threaded inserts on your TVs back panel.
Note the two sets of mounting holes on your TV
mounting plate. Determine which set aligns perfectly
with the four threaded inserts on your TVs back panel.
Determine which set of screws is the correct length for
your TVs inserts. Test one of the screws to ensure it’s
the correct choice.
By hand, thread the screws through the mounting
plates mounting holes into the four TV inserts.
With a Phillips screwdriver, tighten down the screws so
the TV mounting plate is securely attached to the TV.
DO NOT over tighten bolts. This can damage
the wall plate or the surface of your wall.
1)
2)
3)
4)
5)
13



WARNING
DO NOT OVER TIGHTEN SCREWS.
14
Hanging Your LCD TV on the Wall Plate
Connect the TVs power cord and any AV cable
to the TV before hanging it. With the help of a friend,
lift the TV and plug the TVs power cord into a nearby
AC outlet. If routing AV cable in wall, run it through the
prepared opening in your wall.
Lift your TV up to mount level. Raise the TV just above
the wall mounting plate. Slide the TV and mounting
plate downward onto the wall mounting plate.
Firmly secure the TV mounting plate on the wall plate
by threading the provided security screw through
one of the security tabs on either side of the mount.
Tighten the screw with a Phillips screwdriver.
Do not over tighten.
Congratulations
Youve successfully installed your SmartView 100S
FlatScreen Mount.
Visit us at
www.MonsterCable.com/FlatScreen
for more
innovative Monster FlatScreen products, including our
ultra low-profi le FlatScreen Cable and our safe FlatScreen
Clean LCD and plasma cleaning solution for preserving
your atscreen display.
1)
2)
3)
15
16
LIVE FOREVER LIMITED WARRANTY FOR CONSUMERS
Monster, LLC, 7251 West Lake Mead Blvd., Las Vegas, NV 89128, (“Monster”) extends You
this Limited Warranty. Statutory or common law may provide You with additional rights
or remedies, which shall not be a ected by this Limited Warranty.
DEFINITIONS
Adequate Use
means use of the Product (i) within a home or dwelling, (ii) for private
(as opposed to commercial) purposes, (iii) in conformance with all applicable local,
state or federal law, code or regulations (including without limitation building and/or
electrical codes), (iv) in accordance with manufacturer recommendations and/or
instructions in the materials and documentation that accompany the Product, and (v)
with proper electrical grounding.
Authorized Dealer”
means any distributor, reseller or retailer that (i) was duly
authorized to do business in the jurisdiction where it sold the Product to You, (ii) was
permitted to sell You the Product under the laws of the jurisdiction where You bought
the Product, and (iii) sold You the Product new and in its original packaging.
“Formal Warranty Claim
means a claim made in accordance with the section “Formal
Warranty Claims herein.
“Product”
means a Product (i) that contained a reference to the “live forever” Limited
Warranty, (ii) that You bought from an Authorized Dealer new and in its original
packaging, and (iii) whose serial number, if any, has not been removed, altered,
or defaced.
“Product Defect”
means an inadequacy of the Product that existed at the time when
You received the Product from an Authorized Dealer and that causes a failure of the
Product to perform in accordance with Monster’s documentation accompanying the
Product, unless such failure has been caused completely or partly by (a) any use other
than Adequate Use, (b) transportation, neglect, misuse or abuse by anyone other
than Monsters employees; (c) alteration, tampering or modi cation of the product by
anyone other than a Monster employee; (d) accident (other than a malfunction that
would otherwise qualify as a Product Defect); (e) maintenance or service of the Product
by anyone other than a Monster employee; (f) exposure of the Product to heat, bright
light, sun, liquids, sand or other contaminants; or (g) acts outside the control of Monster,
including without limitation acts of God, fi re, storms, earthquake or fl ood.
“You
means the rst individual person that purchased the Product in its original
packaging from an Authorized Dealer. This Limited Warranty does not apply to persons
or entities that bought the Product (i) in used or unpackaged form, (ii) for resale, lease
or other commercial use, or (iii) from someone other than an Authorized Dealer.
SCOPE OF THIS LIMITED WARRANTY
If a Product contained a Product Defect when You bought it from an Authorized Dealer
and Monster receives a Formal Warranty Claim from You within two (2) months after
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Monster SmartView 100S User manual

Category
Flat panel wall mounts
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI