Seiki SE43FO01UK User manual

Brand: Seiki

Model: SE43FO01UK

Category: LCD TVs

Type: User manual

This manual is also suitable for

颜色：单色印刷;

尺寸:140x210mm;

材质:封面100g双胶纸，内页80g双胶纸，

装订方式：骑马钉。

印刷要求

Remarks:

Size:140x210mm;

Colour:single color printing

Material:Cover 100 g offset paper,

Inside pages 80 g offset paper

centre-stitched

USER MANUAL

Read the User Manual carefully before using the TV

and keep it for further reference.

SE43FO02UK

CONTENTS

Important Safety Instructions 2

Safety Information 3

Preparation 4

What is Included 4

Front View 5

Rear View 6

Installing the Base Stand 7

Removing the Stand for Wall-Mounting 7

Remote Control 8

Connecting External Devices 10

General Operation 11

Initial Setup 11

Selecting the Input Source 14

Customizing TV Settings 15

Viewing Recorded Programme 15

Picture 17

Sound 18

Channel 19

Lock 25

Time 26

Network 27

Setting 28

Entertainment 29

MultiMedia 29

Viewing Movies 30

Listening to Music 31

Viewing Photos 32

Files 33

Using the Features 34

Electronic Programme Guide(EPG)(DTV mode) 34

Viewing Teletext(DTV mode) 35

Time Shift Function(DTV mode) 36

Recording DTV Programmes(DTV mode) 38

Programme Timer(DTV mode) 39

Digital Reception 41

Supported File Formats 41

Troubleshooting 42

Maintenance 43

Plug Replacement-UK 43

Specication 44

Dispose Information 44

Limited Warranty 45

Warning: To prevent the spread of re, keep candles or

other open ames away from this product at all times.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions – All the safety and operating instructions should be read before this product is

operated.

• Keep these instructions – The safety and operating instructions should be retained for future reference.

• Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.

• Follow all instructions – All operating and use instructions should be followed.

• Do not use this apparatus near water – The appliance should not be used near water or moisture – for

example, in a wet basement or near a swimming pool, and the like.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult

an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

• Only use attachments/accessories specied by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,or

sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

• Please keep the unit in a well-ventilated environment.

• WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture. The apparatus shall not be exposed to dripping or splashing. Objects lled with liquids,

such as vases should not be placed on apparatus.

• WARNING: The batteries shall not be exposed to excessive heat such as sunshine, re or the like.

• WARNING: The mains plug is used as disconnect device, the disconnect device shall remain readily

operable.

• WARNING:

To reduce the risk of electric shock, do not remove cover (or back) as there are no user-

serviceable parts inside. Refer servicing to qualied personnel.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to

alert the user to the presence of non-insulated “dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance instructions in the literature

accompanying the appliance.

This equipment is a Class II or double insulated electrical appliance. It has been designed

in such a way that it does not require a safety connection to electrical earth.

SAFETY INFORMATION

This product contains electrical or electronic materials. The presence of these materials may, if not disposed of

properly, have potential adverse effects on the environment and human health.

Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected

separately. As a consumer, you are responsible for ensuring that this product is disposed of properly.

To ensure reliable and safe operation of this equipment, please carefully read all the instructions in

this user guide, especially the safety information below.

Electrical Safety

• The TV set should only be connected to a main power supply with voltage that matches the

label

at the rear of the product.

• To prevent overload, do not share the same power supply socket with too many other electronic

components.

• Do not place any connecting wires where they may be stepped on or tripped over.

• Do not place heavy items on any connecting wire, which may damage the wire.

• Hold the main plug, not the wires, when removing from a socket.

• During a thunderstorm, or when not using the television for extended period of time, turn off the

power switch on the back of the television.

• Do not allow water or moisture to enter the TV or power adapter. Do NOT use in wet, moist areas,

such as bathrooms, steamy kitchens or near swimming pools.

• Pull the plug out immediately, and seek professional help if the main plug or cable is damaged,

liquid is spilled onto the set, if the TV set accidentally exposed to water or moisture, if anything

accidentally penetrates the ventilation slots or if the TV set does not work normally.

• Do not remove the safety covers. There are no user-serviceable parts inside. Trying to service the

only service this apparatus.

• To avoid a battery leakage, remove batteries from the remote control, when the remote is not use

for long period, or when the batteries are exhausted.

•

Physical Safety

• Do not block ventilation slots in the back cover. You may place the TV in a cabinet, but ensure at

least 5cm (2’’) clearance all around.

• Do not tap or shake the TV screen, or you may damage the internal circuits. Take good care of the

remote control.

•

• Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding plug has two blades and a third grounding

prong. The wide blade, or the third prong is provided for your safety. If the provided plug does not

• Protect the power cord from being walked on or pinched particularly at plugs.

• Unplug the apparatus during lightning storms or when unused for long periods.

•

operate normally or if the apparatus, including the power supply cord or plug, has been damaged

in any way.

• Servicing is also required if liquid has been spilled, or objects have fallen into the apparatus; when

the apparatus has been exposed to rain or moisture; or if the apparatus has been dropped.

• Always connect your television to a power outlet with protective ground connection.

Remote Control with BatteriesTV Set

PREPARATION

What is Included

User Manual

Quick Start Guide

Quick

Start Guide

MINI YPBPR cable MINI AV cable

Base Stand Six Screws Stable Bracket

PREPARATION

Front View

1. POWER

Switch the TV between On / Standby mode.

2. SOURCE

Press to select among different input signal sources.

3. MENU

Display the OSD (on screen display) menu.

4. CH /

Press to select a channel.

5. VOL +/-

Press to adjust the volume.

6. POWER Indicator

Illuminate blue when the TV is turned on. Illuminate red when the TV is in standby mode.

7. IR (Infrared Receiver)

Receive IR signals from the remote control.

PREPARATION

Rear View

1. LAN

Network connection port.

2. HDMI Inputs

output device.

3. SCART Socket

Connect to SCART cable between the

SCART socket on the TV and the SCART

socket on the external device (decoder,

or DVD player).

4. PC AUDIO Input

Connect to a computer audio output.

5. VGA Input

Connect to a computer or other devices

with a VGA interface.

6. DTV/TV Input

Connect to the antenna (75Ω VHF/UHF)

socket with the RF coaxial cable.

7. MINI YPBPR

Connect to AV devices with component

(Y/Pb/Pr) video and audio output sockets.

COMPONENT&VIDEO share with AUDIO

IN(L/R)subscribe to.

8. CI Slot

Used to insert a CI card. A CI card allows

you to view all the channels that you

subscribe to.

9. MINI AV

Connect to the composite VIDEO and

AUDIO (L/R) output sockets on external

video devices.

10. USB Port

Connect to a USB storage device to play

compatible video,audio ,photo and text

11. OPTICAL Digital Audio Output

Connect to the audio socket on the digital

audio system.

12. Headphone Socket

Connect to the Headphone.

PREPARATION

Installing the Base Stand

Removing the Stand for Wall-Mounting

1.Lay the TV face-down on a flat,

cushioned surface to avoid damaging

or scratching.

2.Fix the base stand to the TV using the

4 pcs provided screws(M4x14).

1. Lay the TV face-down on a flat,

cushioned surface to avoid damaging

or scratching.

2. Untighten the 6 pcs screws holding

the stand assembly and remove them.

3. Attach the wall-mount bracket to the

TV using the mounting holes on the

back of the TV. Mount this TV

according to the instructions included

in the wall-mount bracket.

3.Remove 2 pcs ST3x12 screw from

TV and fix the stable bracket to the

TV using the 2 pcs provided screws

(ST3x16).

PREPARATION

Remote Control

1. : Switch the TV between on and standby

mode.

: Mute and restore your TV sound.

3. 0-9 Number Buttons: Use to select a

programme.

4. CH.LIST: Display programme list (DTV / ATV

modes).

: Go back to the previous viewing channel.

6. MENU: Display the main menu

7. SOURCE: Select among the different input

signal sources: DTV / Analogue TV / Composite /

AV / SCART / Component / YPbPr / HDMI 1 /

HDMI 2 / HDMI 3 / PC-RGB.

8. OK:

: Allows you to navigate through the

OSD menu and adjust the TV's settings to your

preference.

9. RETURN: Return to previous menu.

10. EXIT: Exit the OSD menu.

11. EPG: Display the Electronic Program Guide

(DTV mode).

12. VOL + / –: Adjust the volume.

13. CH

/ : Select a channel.

14.

/RECORD: One button recording function,

press to record current program (DTV mode).

15.

: Start or pause playback (USB / DTV

modes).

TIMESHIFT: Press to turn the timeshift function

on and off (DTV mode).

16.

: Press to skip to the beginning of the

previous chapter or track (USB / DTV modes).

TTX: Turn on and off the teletext function.(ATV/

DTV Modes)

17.

: Press to skip to the beginning of the next

chapter or track (USB / DTV modes).

HOLD: Press to freeze a multi-page Teletext

passage on screen (DTV / AV / SCART modes).

18.

: Press to fast rewind (USB / DTV modes).

CANCEL: Press to cancel the Teletext mode

(DTV / AV / SCART modes).

19.

: Press to stop playback (USB / DTV /ATV

modes).

FAV: Press to show your Favourite Channels

list (DTV / ATV modes).

20.

: Press to fast forward (USB / DTV modes).

REVEAL: Press to reveal hidden information

such as answers to a quiz on Teletext (DTV /

AV / SCART modes).

21. RED / GREEN / YELLOW / BLUE: Use these

buttons to select corresponding function shown

on screen and in menus.

22. INDEX: Press to select the page number of the

index from Teletext (DTV mode).

23. SUBPAGE: Press to display the subpage on

the Teletext screen (DTV / AV / SCART modes).

PREPARATION

24. SIZE: Press to enlarge the picture on the TV

Teletext (DTV / AV / SCART modes).

25. LANG: Select the DTV audio language (DTV

mode).

: Press to switch between different audio

languages (only applicable when the broadcast

supports this function).

26. SUBTITLE: Press to display the subtitles

broadcast with the program (DTV mode).

Selects the subtitles on the USB drive (USB

mode).

27. DISPLAY: Press to show information about the

current screen such as current channel or input

source.

28. ASPECT: Select from the following settings:

Auto / 4:3 / 16:9 / Zoom 1 / Zoom 2 / Subtitle/

Just Scan(Only HDMI mode).

29. FREEZE: Freeze the picture.

30. TV.RD: Press to select between TV and Radio

programs (DTV mode).

31. P.MODE: Press to select picture mode.

32. S.MODE: Press to select sound mode.

33. SLEEP: Press to set the TV's sleep timer.

Note:

Remove battery during storage or when you are not

using the device for a long time.

To control the device using the remote control, point

the remote control at the device and then press the

button with the required function.

The maximum range of the remote control is about

5 meters with a deviation of up to +/- 30° from the

perpendicular direction to the reception sensor of

the remote control on the front side of the device.

The falling capacity of the batteries gradually

reduces the remote control range.

There must be no solid obstacles in the area

between the remote control and the device when

the remote control is being used.

During standard use the lifetime of batteries in the

remote control is about 1 year.

When the effective range of the remote control is

substantially reduced, or when there are problems

with its use, change both the batteries in the remote

control.

If you will not be using the remote control for a

longer period of time, take out both batteries from

it - in this in this way you will prevent potential

damage caused by their leakage.

CONNECTING EXTERNAL DEVICES

Initial Setup

• Connect one end of an RF coaxial cable (not supplied) to the aerial socket

in your wall. Connect the other end of the cable to the RF (

75Ω

) socket in the

bottom connection panel on the back of the TV.

• Attach all other devices to the TV following instructions.

• Connect the TV's mains cable into a wall socket and turn the power on if

required.

• In standby mode, press the button on the main unit or on the remote control

to turn the TV on. The red LED indicator will turn blue.

• The first time you turn your TV on it will go straight to the Welcome screen.

Press the EXIT button to go to the No Signal screen.

• After pressing the OK button you will go to the First Time Installation menu.

GENERAL OPERATION

(Local Rates Apply)

GENERAL OPERATION

•

Language is preset to English and Français/ Deutsch/ Italiano/ Português

Español for optional.

• Country is preset to UK and FranceGermanyItalyPortugal Spain for optional.

• Now press the ▼ button on the remote control to select Tuning mode. Use the

buttons to select either DTV + ATV (analogue and digital channels), DTV

(digital channels only) or Analogue TV (analogue channels only).

• Press the ▼ button on the remote control to select Environment. Use the

buttons to select between Home Mode or Store Mode. If you select to change

to store mode, a warning screen will appear asking if you want to leave home

mode. If you do, press the

button to continue

Note: Store Mode should only be used if the TV is to be used as a display in a

shop.

• Once you have completed all of the preliminary settings, use ▼ to select Auto

Tuning to begin channel tuning.

• Note: You can skip the tuning process by pressing the MENU button. A pop-

up screen will appear, press the

button to select 'Yes'

You can also press the EXIT button to stop the channel tuning process.

• When the tuning process has finished the Country menu will be displayed,

press the OK

GENERAL OPERATION

• The Primary Region menu will now be displayed, press the OK to conrm.

• After pressing the OK button you will have completed the rst time setup and

your TV will be ready to use.

You can connect multiple devices to your TV to improve your watching and listening

pleasure.

• Press the SOURCE button on the main unit or on the remote control to display

the Input Source list.

• Use the buttons to select the desired input source and press OK button to

conrm.

Note: Not all sources will be displayed when the menu is open. You will need to

use the buttons to scroll through the list to view all of the sources.

Selecting Input Source

GENERAL OPERATION

CUSTOMIZING TV SETTINGS

Viewing Recorded Programme

• You can play a recorded programme from the recorded programme list or from

the USB storage device.

• Note: When inserting the USB device to the USB port at the rear of TV, a

message will pop up. Use the

buttons to select either Yes or No and press

the OK button to conrm.

• To open the MultiMedia menu whilst using the TV, press the MENU button on

the main unit or on the remote control. Use the buttons to select the

MultiMedia menu and press the OK button to conrm.

• Use the buttons to select MOVIE and press OK button to enter.

• Use the buttons to select _MSTPVR le then press the OK button

to open.

• Use the buttons to select the recorded programme you wish to

watch.

Note: When you highlight a lm to watch, after a few seconds a thumbnail movie

will appear on the screen.

• When you have found the lm you want to watch, press the OK or button to

play the recording in full screen mode.

• Press the MENU button to display the function bar at the bottom of the screen.

Use the buttons to navigate through the functions then press the OK

when you have highlighted the one you require. See over the page for a full list

of the function bars list of functions.

CUSTOMIZING TV SETTINGS

Play

Press to play the programme.

Previous Press to watch the previous programme in the playlist.

Next Press to watch the next programme in the play list.

Pause Press to pause the programme.

Stop Press to play back of the programme.

Press repeatedly to rewind at x2 / x4 / x8 / x16 / x32

speeds.

Press repeatedly to fast forwards at x2 / x4 / x8 / x16 / x32

speeds.

Repeat

Press to select the repeat function you want. Choose form

NONE / ONE / ALL / RANDOM.

CUSTOMIZING TV SETTINGS

TimePlay

Allows you to select a time to start watching the programme

from.

Enlarge

Allows you to enlarge the screen image of the programme.

Shrink Allows you to shrink the screen image of the programme.

Playlist Display a full list of recorded videos you can watch.

Info

Shows information about the current programme you are

watching.

• Press the EXIT button to return to the previous menus.

Picture

• Press the MENU button on the main unit or on the remote control to display the

main menu.

• Use

to navigate and select PICTURE and press OK to enter.

• Press

buttons to select the following picture options and then use

buttons to adjust each option’s setting.

Auto

Picture Mode

Choose between Dynamic / Standard / Mild / Personal

modes.Alternative:Repeatedly press P.MODE button on

the remote control to change the picture mode until you

Contrast

Adjusts the difference between light and dark levels in the

picture.

Brightness Increases or decreases the amount of white in the picture.

Saturation Control the intensity of the colour.

Sharpness

Adjust the level of crispness in the edges between light and

dark areas of the picture.

Colour Temp

Choose between Standard / Warm / Cool. The colour temp

changes the amount of blue and red in your picture.

Aspect Ratio

Choose to view the TV picture in various formats. Choose

from Auto / 4:3 / 16:9 / Zoom 1 / Zoom 2 / Subtitle /

Noise Reduction

Choose between On or Off. Noise reduction reduces the

amount of picture noise (speckles and lines etc.) of any

connected device.

Sound

• Press the MENU button on the main unit or on the remote control to display the

main menu.

• Use

to navigate and select SOUND and press OK to enter.

• Press

buttons to select the following sound options and then use

buttons to adjust each option’s setting.

CUSTOMIZING TV SETTINGS

DTS TruSurroud

Just Scan(Only HDMI mode).

Page is loading ...

Seiki SE43FO01UK User manual

Brand: Seiki

Model: SE43FO01UK

Category: LCD TVs

Type: User manual

This manual is also suitable for

Download PDF

report

Seiki SE43FO01UK User manual

This manual is also suitable for

Seiki SE43FO01UK User manual

Related papers

Other documents