Sylvania LD200SL9 Owner's manual

20" Digital LCDTV

built-in DVD Player

Owner's Manual

LD200SL9

inch

Disc ONLY

eN.A_CeD_FI_ITIO._LEVlSIO.

ITI DOLBY

DIGITAL I

\

TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.

iiiiiiiii!iiiii!iii!i!!!i!!i!i!i!i!i!i!i!i!i!i!i!i!ili!ilil

WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

CAUTION

CAUTION: TO REDUCETHE RISKOF ELECTRICSHOCK,

DO NOT REMOVECOVER(ORBACK).NO USERSERVICEABLE

PARTSINSIDE.REFERSERVICINGTO QUALIFIED SERVICE

PERSONNEL.

Theimportantnote islocatedontherearofthecabinet.

Important Safeguards

1,, READ INSTRUCTIONS - All the safety and operating instructions should be

read before the appliance is operated.

2 RETAIN INSTRUCTIONS - The safety and operating instructions should be

retained for future reference.

3 HEED WARNINGS - All warnings on the appliance and in the operating

instructions should be adhered to.

4 FOLLOW INSTRUCTIONS- All operating and use instructions should be

followed.

5 CLEANING - Unplug TV from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for

some specific reason, such as the possibility of the loss of an authorization

code for a CATV converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in item 5.

6 ATTACHMENTS- Do not use attachments not recommended by the TV

manufacturer as they may cause hazards.

7 WATER AND MOISTURE - Do not use this TV near water, for example, near a

bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near

a swimming pool, and the like.

8° ACCESSORIES - Do not place this TVon an unstable cart,

stand, tripod, bracket, or table. The TV may fall, causing

serious injury to someone, and serious damage to the

appliance. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the TV.

Any mounting of the appliance should follow the

manufacturer's instructions and should use a mounting

accessory recommended by the manufacturer. An

appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

AMEUBLES - Cet appareil ne dolt _tre plac_ que sur un

meuble (avec ou sans roulettes) recommand_ par le

fabricant. Si vous I'installez sur un meuble _ roulettes,

d_placez les deux ensembles avec precaution. Un arr_t

brusque, I'utilisation d'une force excessive et des surfaces

irr_gulieres risquent de d_stabiliser I'ensemble et de le

renverser.

9., VENTILATION - Slots and openings in the cabinet and the back or bottom

are provided for ventilation and to ensure reliable operation of the TV and to

protect it from overheating, these openings must not be blocked or covered.

The openings should never be blocked by placing the TV on a bed, sofa, rug,

or other similar surface.This TV should never be placed near or over a radiator

or heat register. This TV should not be placed in a built-in installation such as

a bookcase or rack unless proper ventilation is provided or the manufacturer'

s instructions have been adhered to.

10_ POWER SOURCES -This TV should be operated only from the type of power

source indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your appliance dealer or local power

company. For TVs intended to operate from battery power, or other sources,

refer to the operating instructions.

11 _ GROUNDING OR POLARIZATION -This TV is equipped with a polarized

alternating-current line plug (a plug having one blade wider than the other).

This plug will Fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12_ POWER-CORD PROTECTION - Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed upon

or against them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the appliance.

13 OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system

is connected to the TV, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70,

provides information with respect to proper grounding of the mast and

EN

THIS SYMBOL INDICATES THAT DANGEROUS

VOLTAGE CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THATTHERE ARE

IMPORTANT OPERATING AND MAINTENANCE

INSTRUCTIONS IN THE LITERATURE

ACCOMPANYING THE APPLIANCE.

supporting structure, grounding of the lead-in wire to an antenna discharge

unit, size of grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for the grounding

electrode. (Fig. A)

FIGUREA

EXAMPLEOF ANTENNAGROUNDINGASPER

NATIONALELECTRICALCODE

GROUND

NEC NATIONAL ELECTRICAL CODE

I {N[c SECTION 810 2O)

UNDING CONDUC

(N[C SECTION 810 21)

_ GROUND CLAMPS

POVVERSERVICE GROUNDING

ELECTRODE SYSTEM

{N CART 0, ARTH)

14_ LIGHTNING - For added protection for this TV receiver during a lightning

storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning and powerdine surges.

15_ POWER LINES - An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light of power circuits, or

where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16_ OVERLOADING - Do not overload wall outlets and extension cords as this

can result in a risk of fire or electric shock.

17_ OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV

through openings as they may touch dangerous voltage points or short out

parts that could result in afire or electric shock. Never spill liquid of any kind

on the TV.

18_ SERVICING - Do not attempt to service this TV yourself as opening or

removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing to qualified service personnel.

19_ DAMAGE REQUIRING SERVICE - Unplug this TV from the wall outlet and

refer servicing to qualified service personnel under the following conditions:

a. When the power supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the operating

instructions, as improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician

to restore the TV to its normal operation.

e. IftheTVhas been dropped or damaged in anyway.

f. When the TV exhibits a distinct change in performance, this indicates a

need for service.

20_ REPLACEMENT PARTS -When replacement parts are required, be sure the

service technician uses replacement parts specified by the manufacturer that

have the same characteristics as the original part. Unauthorized substitutions

may result in fire, electric shock, injury to persons or other hazards.

21 _ SAFETY CHECK - Upon completion of any service or repairs to this TV, ask

the service technician to perform routine safety checks to determine that the

TV is in proper operating condition.

22_ HEAT - This TV product should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including amplifiers) that

produce heat.

[] Precautions

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or climbing

on it. A falling unit can cause serious injury or even death.

(_ LAMP IN LCD CONTAINS MERCURY, DISPOSE ACCORDING TO LOCAL, STATE OR FEDERAL LAW.

CAUTION: TO PREVENT,ELECTRIC SHOCK,, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. LA

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS

BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment I

may cause harmful interference unless the modifications are expressly approved in the manual. The user

cou dose the authority to operate this equipment if an unauthorized change or modification ismade.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-O03.

Cet appareil numbrique de la classe B est conforme _ la norme NMB-O03 du Canada.

Note to CATV system installer: I

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines I

for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the

building as close to the point of cable entry as practical.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to

possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates

copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copy-

right protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

i!iii!!

EN

LOCATION

For safeoperation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation:

• Shield it from direct sunlight and keep it away from sourcesof intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the

unit. Do not place the unit on a carpet because this will block the ventilation holes.

• Install the unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the unit near strong magnetic fields.

• Avoid moving the unit to locations where temperature differences are extreme.

• Besure to unplug the AC power cord from the outlet before carrying the unit.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an ACoutlet. Grasp it by the plug.

• If,by accident, water is spilled on the unit, unplug the power cord immediately and take the unit to our authorized service center for

servicing.

• Do not place anything directly on top of the unit.

MOISTURE WARNING

• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold

room or under conditions of high humidity.

When the condensation occurs inside the unit, turn the unit on and leave it at least 2 hours to dry out.

The serial number of this product may be found on the back of the unit. No others have the same serial number as yours. You

should record the number and other vital information here and retain this book as a permanent record of your purchase to aid

identification in case of theft.

date of purchase dealer phone N01 serial No.

dealerpurchasefrom model No. dealer address

Note about recycling: I

This product's packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your I

local recycling regulations. I

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning

chemical wastes.

[] Supplied Accessories

owner's manual remote control

(1EMN23980) _ (NF603UD)

batteries

(AAx 2)

• If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free

customer support line found on the cover of this manual.

• Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters).

Contact your local electronics store for these items.

[] Tilt Stand

You can adjust the stand to change the angle

of the TV (-2.5 ° to 10°).

I i I

till ,

, ,// /

17/

I '

[] Symbols Used in this Manual

The following is the description for the symbols used

in this manual.

Description refers to:

iivl ill _Ill i [e]__ IDlvlDlill _[q i [el__t

: Analog TV

operation

: Digital TV

operation

• If neither symbol appears

under the function

heading, operation is

applicable to both.

: Playback of

DVD-video

: Playback of

audio CD

: Playback of

CD-RW/-R with

MP3 files

• If no symbol appears

under the function

heading, operation is

applicable to all.

EN

[] Contents

NTROIDUCTON

ImportantSafeguards............................................. 2

Precautions...................................................... 3

SuppliedAccessories.............................................. 4

TiltStand........................................................ 4

SymbolsUsedinthisManual....................................... 4

Features......................................................... 6

RemoteControlFunction.......................................... 7

InstallingtheBatteries............................................ 7

ControlPanel..................................................... 8

RearPanel....................................................... 8

CON NIECTON

BasicConnection.................................................. 9

ExternalDeviceConnection....................................... 10

TV Functions

NIT All,,,,,,,SEWNG

InitialSetup..................................................... 12

MainMenu...................................................... 13

AutoChannelScan............................................... 13

LanguageSelection.............................................. 14

WATCI"""ING TV

ChannelSelection................................................ 15

VolumeAdjustment.............................................. 15

SwitchingEachMode............................................. 16

SwitchingAudioMode........................................... 16

ScreenInformation .............................................. 17

TVScreenDisplayMode........................................... 18

SleepTimer..................................................... 18

OIF:::>TONAL SIE:W NG

ChannelAdd/Delete.............................................. 19

PictureAdjustment.............................................. 19

ClosedCaption................................................... 20

DTVClosedCaption............................................... 21

DTVCCStyle..................................................... 21

BackLightSetting............................................... 22

ColorTemperature............................................... 23

V-chip.......................................................... 23

DVD Functions

....] r"""''') _

OI I::::::::II_ATNGIDVD

PlayableMedia.................................................. 26

UnplayableMedia............................................... 26

Playback........................................................ 27

DVDMenu...................................................... 27

ResumePlayback................................................ 27

Pause.......................................................... 27

Step-by-stepPlayback............................................ 28

FastForward/ FastReverse....................................... 28

SlowForward/SlowReverse...................................... 28

Zoom........................................................... 28

MP3Playback................................................... 29

SearchFunctions................................................. 30

RepeatPlayback................................................. 31

RepeatA-BPlayback............................................. 31

ProgrammedPlayback........................................... 32

RandomPlayback................................................ 32

On-screenDisplay................................................ 33

SpecialSettings.................................................. 34

P' I......

h,,,,,}Vh,,,,,}SETT NG

DVDLanguageSetting ........................................... 37

DisplaySetting.................................................. 38

DVDAudioSetting............................................... 39

ParentalSetting................................................. 40

Others.......................................................... 41

ResettotheDefaultSetting....................................... 42

LanguageCodeList.............................................. 42

TROU IBLESHOOT NG

TroubleshootingGuide........................................... 43

NIF::::::OIF:::::(MATON

i

J

i?

iii_iill

ii:i

iiii!!i__

Glossary........................................................ 45

Maintenance.................................................... 45

CableChannelDesignations....................................... 46

GeneralSpecifications............................................ 46

ElectricalSpecification............................................ 46

OtherSpecifications.............................................. 46

LimitedWarranty........................................ Backcover

{} 2008 Funai Electric Co., Ltd.

any storage medium, in any form or for any purpose without the express prior written consent of Funai.

Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the

obligation to notify any person or organization of such changes.

FUNA[ with the _ design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written

consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this

manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein.

Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property

rights to the fullest extent of the law.

ii_iZ

EN

[] Features

TV

• DTV/TV/CATV

- You can use your remote control to select channels

which are broadcast in digital, conventional analog,

standard definition. Also, cable subscribers can

access their cable TV channels.

• Program Information Display (DTV only)

- You can display the title, contents and other

information of the current DTV program on the TV

screen.

• Auto Channel Scan

-This unit automatically scans and memorizes

channels available in your area, eliminating difficult

setup procedures.

• V-chip

- This feature allows you to block children's access to

inappropriate TV programs.

• Closed Caption Decoder

- Built-in closed caption decoder displays text for

closed caption supported programming.

• MTS/SAP Tuner

- Audio language or stereo sound function can be

selected from the remote control.

• Auto Shut Off Function

- If there is no signal input from the antenna terminal

and no operation for 15 minutes, the unit will turn

itself off automatically.

• Sleep Timer

- This feature will automatically turned off the power

of the unit at a specific time.

• Choices for On-screen Language

- Select your on-screen language:

English, Spanish or French.

• PLL Frequency Synthesized Tuning

- Provides free and easy channel selection and lets

you tune directly to any channel using the channel

number buttons on the remote control.

• Component Video Input

• S-video Input

• AV Input

• Digital Audio Coaxial Output

D V D

• Dolby Digital Sound

- Enjoy Dolby Digital multi-channel surround sound

when you connect the unit to your Dolby Digital

decoder.

• Still / Fast / Slow / Step Playback

-Various playback modes are available including still

pictures, fast forward/reverse, slow motion and step

frames.

• DVD Menus in a Desired Language

- You can display DVD menus in a desired language, if

available on a DVD-video.

• Screen Saver

- If there is no operation for 5 minutes, the screen

saver program starts.

• Parental Lock

- Block the viewing of DVD-video unsuitable for

children.

• Resume Play

- Lets you resume play back from the point at which

playback was stopped.

• Bit Rate Indication

• Dynamic range control (DRC)

- You can control the range of sound volume.

Accessing from [MODE] button

During playback

• Subtitles in a Desired Language

- You can select a desired language for displaying

subtitle, if that language is available on a DVD-video.

• Selecting a Camera Angle

- You can select the desired camera angle, ira DVD

contains sequences recorded from different angles.

• Zoom

- Allows you to enlarge the size of picture image.

• Black Level Adjustment

• Virtual Surround

• Search

- chapter search / title search / track search / time

search

• Marker

-The part designated by user can be called back.

• Repeat

- chapter / title / track / group / all / A-B

In stop mode

• Program Playback for audio CD and MP3

- You can program the order of tracks/files to play

them back in designated order.

• Random Playback for audio CD and MP3

-This unit can shuffle the order of tracks/files to play

them back in randomly.

Accessing from [AUDIO] button

During playback

• Choices for Audio Language and Stereo Sound

Function

- Select your desired language or stereo sound

function when different options are available on

your disc.

EN

[] Remote Control Function

1

2

3

12

13

14

15

16

17

18

19

11

5. VOL. _F buttons (p15)

Press to adjust the volume.

6. PAUSE II button (p27)

Press to pause disc playback.

7. SKIP I<1<1/ _ button (p30)

• Press to skip forward or backward

chapters, titles (DVD) or tracks/files (CD,

MP3).

REV _ button (p28)

• Press and hold to begin slow reverse

playback during the pause mode (DVD)

and search backward through a disc.

FWD _ button (p28)

• Press and hold to begin slow forward

playback during the pause mode (DVD)

and search forward through a disc.

8. SETUP button (pl 3 / p37)

Press to display the main menu.

9. RETURN button (p19)

Press to return to the previous menu

operation.

10. CLEAR button (p31)

• Press to clear the numbers entered

incorrectly.

• Press to cancel the point A for A-B

repeat (DVD, CD).

• Press to remove the track/file number

in program input (CD, MP3).

11. MODE button (p6)

• Press to arrange the playing order or

playback randomly (CD, MP3).

• Press to set the black level (DVD) and

the virtual surround (DVD, CD, MP3) on

or off.

• Press to change the camera angle to

see the sequence being played back

from different angle (DVD-video).

• Press to search chapter, title (DVD),

time (DVD, CD) or track/file (CD, MP3).

• Press to set the marker (DVD, CD).

• Press to repeat playback chapter,

title (DVD), track/file, disc (CD, MP3),

group (MP3) repeatedly or between

designated point A and B (DVD, CD).

• Press to magnify the part of picture

(approx. 1.3x, 2x and 4x : DVD).

• Press to select the subtitles on a disc

(DVD).

12. EJECT_ button (p27)

Press to eject the disc.

13. INPUT button (p16)

Pressto access aconnected external device

like a video game, camcorder or VCR.

14. DISPLAY button (p17 / p33)

Digital Mode (DTV)

• Press to display the channel number

and the program information.

Analog Mode (TV)

• Press to display the channel number.

External Input Mode

• Press to display the currently selected

external input mode.

15. AUDIO button (p16 / p34)

Digital Mode (DTV)

• Press to select the audio language.

Analog Mode (TV)

• Press to select the audio mode.

DVD Mode

• Press to select the audio language

(DVD), or sound mode (CD).

16. SCREEN MODE button (p18)

Press to select aspect ratio available for

the TV screen.

17. PICTURE button (plg)

Press to adjust the picture quality.

18. CH. RETURN button (p15)

Press to return to previous channel.

19. CH.•/V buttons (p15)

Press to select channels.

20. PLAYII_ button (p27)

Press to begin disc playback.

21. STOPII button (p27)

Press to stop disc playback.

22. <1 / I_ / • / • buttons (p12)

Press to move left/right/up/clown

through the items.

23. ENTER button (p12)

Press to confirm your selection.

24. MENU button (p27)

• Press to call up the menu on a disc.

• Press to call up the file list. (MP3)

25. TOP MENU button (p2g)

• Press to call up the top menu on a

disc. (DVD-Video)

• Press to return to the top file of the

highest hierarchy in the program and

file list. (MP3)

ill

ill!+¸+!¸¸¸¸

1. POWER button (pl 2)

Press to turn the unit on and off.

2. MUTE button (pl 5)

Press to turn the sound on and off.

3. SLEEP button (p18)

Press to activate the sleep timer.

4. Number buttons (p15)

• Press to select channels.

• Press to select chapter, title (DVD), or track/

file (CD, MP3) directly.

-lENT button

• Press to shift the minor channel from the

major channel.

+I01+I00 button

• Press to select 100 or higher channels (CATV)

• Press to search if there are minor channels on

the currently selected major channel (DTV)

[] Installing the Batteries

Install the batteries (AA x 2) matching the polarity indicated inside battery compartment of the remote control.

Battery Precautions:

• Be sure to follow the correct polarity as indicated in the battery compartment. Reversed batteries may cause damage to the device.

• Do not mix different types of batteries together (e.g., Alkaline and Carbon-Zinc) or old batteries with fresh ones.

• If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

• Do not try to recharge batteries; they can overheat and rupture.

EN

[] Control Panel

1

2

3

4

5

6

7

8

9

lO

1. SETUP button (pl 3 / p37)

Press to display the main menu.

2. STOP• button (p27)

Press to stop disc playback.

3. PLAYI_ button (p27)

Press to begin disc playback.

4. EJECT-- button (p27)

Press to eject the disc.

5. VOLUME _/T buttons (p15)

Press to adjust the volume.

6. CHANNELA/_' buttons (p15)

Press to select channels or move up/down through

the main menu items.

7. INPUT button (p16)

Press to select the digital, analog or external input.

8. POWER button (p12)

Press to turn the unit on and off.

9. Infrared Sensor Window

Receives infrared rays transmitted from the remote

control.

10. Disc Loading Slot (p27)

Insert the disc with label facing back of this unit.

[] Rear Panel

;ide of the unit

2

3

4

5

6

7

8

1. ANT jack (pg)

RF coaxial cable connection for your antenna or cable

receiver.

2. HEADPHONE jack

Headphone connection for personal listening.

3. COMPONENT and AUDIO input jack (pl0)

Component video cable connection for an external

device.

Use component video and audio output jack of an

external device.

4. AUDIO input jack (pl0)

RCA audio cable connection for an external device.

5. VIDEO input jack (pl 1)

RCA video cable connection for an external device.

6. S-VIDEO input jack (pl0)

S-video cable connection for an external device.

7. COAXIAL (digital audio) output jack (pl 1)

Digital audio coaxial cable connection for a decoder or

an audio receiver.

Use digital audio input jack of an external device.

8. AC power cord

Connect to a standard AC outlet to supply power to

this unit.

EN

[] Basic Connection

Thissectiondescribeshowtoconnecttheunittoanantenna,cablereceiverorsatellitebox.

Note:

• Besure yourantenna or other device is connected properly before plugging in the power cord.

[Antenna Cable Connection]

When connecting the unit to an antenna or cable TV signal (without receiver/satellite box)

Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit.

e.g.)

VHF/UHF_

antenna _ rear of this unit

i::!

cableTV

signal

RFcoaxial cable

_Once connections are completed, turn on the unit and begin initial setup.

Channel scanning is necessary for the unit to memorize all available channels in your area.

(Refer to "Initial Setup" on page 12.)

Note:

• Ifyou have anyquestion about theDTV'santenna, visit www.antennaweb.org for further information.

• Foryour safetyand to avoid damage to device,please unplug theRFcoaxial cable from the antenna input jack before moving the unit.

• Ifyou use an antenna to receiveanalog TV,it should alsowork for DTVreception. Outdoor or attic antennas will be more effective than set-

top versions.

• Toeasilyswitch your reception source between antenna and cable,install an antenna selector.

• Ifyou connect to the cablesystem directly, contact the CATVinstaller.

[Connection to Cable Receiver or Satellite Box]

Use an RCA component video cable to connect the component video input jack of the unit to the component video

output jack of the cable receiver / satellite box.

If you connect to the unit's component video input jack, connect RCA audio cable to the audio L/R jack of VIDE02.

e.g.}

satellite

dish

RFcoaxial

caple

(green) (blue) (red)

FAUDIOOUT_ _ COMPONENTVIDEOOUT

cable receiver/satellite box

rear of this unit

RCA audio cable

ii,i:i'_

iii_i'!:i

iiii!!:i

ii_i::ii

iiIL

You can also connect this unit to the cable receiver or satellite box other than the component video output jack

because they might have different output jacks.

Required cables and connecting methods of the cable receiver / satellite box, or the availability channel for the clear

QAM may differ depending on the cable/satellite provider. For more information, please contact your cable/satellite

provider.

EN

[] External Device Connection

[Component Video Cable Connection]

Component video connection offers better picture quality for video devices connected to the unit.

Use an RCA component video cable to connect the unit to external video devices equipped with component video

output jack.

If you connect to the unit's component video input jack, connect RCA audio cable to the audio L/R jack of VIDE02.

e.g.)

DVD player with the component

video output jacks

RCAcomponent

video cable

rear of this unit

RCA audio cable

Note:

• This unit accepts480i/480p/simplified 1080ivideo signals.

• Simplified 1080ivideosignal differs to the original 1080ivideosignal becauseit is displayed after converted into 480psignal.

[S-video Cable Connection]

S-video connection offers good picture quality for video devices connected to the unit.

Use an S-video cable to connect the unit to external video devices equipped with S-video output jack.

If you connect to the unit's S-video input jack, connect RCA audio cable to the audio L/R jack of VIDE01.

e.g.)

DVD player with the S-video

output jack

AUDIO OUT S-VIDEO

F L R ] OUT

rear of this unit

RCAaudio cable

Note:

•Ifyou connect to the S-videojack and the videojack at thesame time, the S-videoconnection will have priority.

EN

[Video Connection]

Video connection offers standard picture quality for video devices connected to the unit.

If you connect to the unit's video input jack, connect RCA audio cables to the audio L/R jack of VIDE01.

When the audio jack of the video device is monaural, connect the RCA audio cable to the audio L input jack.

e.g.)

camcorder

VCR

RCA audio cable

rear of this unit

i_iiiiii!

Note:

• Ifyou connect to the S-videojack and the videojack at thesame time, the S-videoconnection will have priority.

[Digital Audio Output Connection]

If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital

broadcasting sound.

"e,g.} rear of this unit

Dolby Digital decoder

DIGITAL AUDIO

COAXIAL IN

digital audio coaxial cable

C!ii

ili_,ii:il

i:%i

i!ii_ii!i_

EN

[] Initial Setup

Thissectionwill guideyouthroughthe unit'sinitialsettingwhichincludes

selectinga languageforyouron-screenmenuand"AUTOPRESETCH"which

automaticallyscansandmemorizesviewablechannels.

Beforeyoubegin:

Makesureiftheunitisconnectedtoantennaorcable.

After making all the necessary connections, press

[POWER] to turn on the unit.

• This operation may take a few moments.

2 Use [Cursor A/V] to select the on-screen language

from the choices on the right side of the TV screen.

(ENGLISH / ESPAiqlOL / FRAN(_AIS)

or

_SELECT LANGUAGE ENGUSH

SELECC]ONEEL ]DIOMA ESPA%L

CHO]S]R LALANGUE FRANCA]S

SELECT:A,V SET:ENTER

SELECCIONE:A,V AJUSTE:ENTER

CHO]X:A,V VAL]DER:ENTER

• "INITIAL SETUP" menu on step 3 will be displayed in

the selected language after you press [ENTER].

Note:

• If you connect the cable system directly, contact the CATV

installer.

• If you press [POWER] or [SETUP] during "AUTO PRESET CH",

this setting will be canceled.

• The initial auto channelscan function can be executed for

either TV/DTV or CATV only once. If you want to scan both

TV/DTV and CATV, you need to select "CHANNEL SETUP" in

the main menu to scan and memorize other channels after

initial presetting is completed. (Refer to page 13.)

• When no channel can be received by "AUTO PRESETCH",

"NO TV SIGNALS" is displayed on the TV screen.

• If there is no signal input from the antenna terminal and

no operation for several seconds after you turn on the unit,

"HELPFUL HINTS" appears. Follow the instructions listed on

the TV screen.

- HELPFULHINTS-

1.PLEASECHECKTO SEE IFTHE

ANTENNA/CABLE / SATELLITEIS

PROPERLYCONNECTED.

2.DIDYOUPERFORM"AUTO PRESETOH"?

3.PLEASEREFERTO FRONTPAGEOFTHE

OWNER'SMANUALOR REAR PANELFOR

SUPPORTLINEINFORMATION.

3 Use [Cursor A/V] to select"AUTO PRESETCH(TV/DTV)"

for TV channels or"AUTO PRESET CH(CATV)" for CATV

channels, then press [ENTER].

OF

- INITIALSETUP-

PLEASE CONNECT ANTENNA OR CABLE

OR SATELLITETO THIS UNIT.

AUTO PRESET CH(TV/DTV)

AUTO PRESETCH(CATV)

• Scanning and memorizing the channels automatically

start.

25

AUTO PRESETOH(TV/DTV)

| : i

• When the scanning and memorizing are completed,

the lowest memorized channel in the broadcasting

will be displayed.

EN

[] Main Menu

Thissectiondescribestheoverviewofthe mainmenudisplayedwhenyou

press[SETUP].Formoredetails,seethe referencepageforeachitem.

Themainmenuconsistsof thefunctionsettingitemsbelow.

Press [SETUP].

e.g.) digital TV mode

- TVSETUP -

_"CHANNEL SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

COLOR TEMR [NORMAL]

DTVCC

• CHANNEL SETUP

You can automatically scan the viewable channels and

remove those that are undesired.

(Refer to "Auto Channel Scan" on page 13.)

• V-CHIP SETUP

You can set the viewing limitations.

(Refer to"V-chip"on page 23.)

• LANGUAGE

You can change the language (English, Spanish,

French) displayed on the main menu.

(Refer to "Language Selection" on page 14.)

• CAPTION

You can change the display format for closed caption,

which displays the dialogue of a TV program or other

information across the TV screen.

(Refer to "Closed Caption" on page 20.)

• BACK LIGHT

You can set the desired brightness mode. (Refer to

"Back Light Setting" on page 22.)

• COLOR TEMP.

You can adjust color temperature ("NORMAL", "WARM"

and "COOL")

(Refer to "Color Temperature" on page 23.)

• DTVCC

In addition to the basic closed caption described

on page 20, DTV has its own closed caption called

DTVCC.

(Refer to'DTV Closed Caption" on page 21 .)

[]Auto Channel Scan

Ifyou switchwires (e.g.,betweenantennaandCATV)orif youmovetheTV

toadifferentareaafterthe initialsetting,orifyourestorethe DTMchannel

youdeleted,youwill needto performautochannelscan.

Beforeyoubegin:

Makesureiftheunitisconnectedtoantennaorcable.

1 Press [SETUP] to display the main menu.

Use [Cursor A/V] to select"CHANNEL SETUP", then

press [ENTER].

e.g.) digital TV mode

- TVSETUP -

or CHANNEL SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

COLOR TEMR [NORMAL]

DTVCC

2

Use [Cursor A/V] to select your desired preset type,

then press [ENTER[.

e.g.) digital TV mode

or

- CHANNEL SETUP -

ADD/DELETE (DTV)

_- AUTO PRESET CH (DTV)

AUTO PRESET CH (W/DTV)

AUTO PRESET CH (CAW)

! CATV takes approx. 5Omin.

3

i Bz_

•When aerial antenna is connected, select"AUTO

PRESETCH(TV)","AUTO PRESETCH(DTV)" or"AUTO ....

PRESETCH(TV/DTV)".

• When connected to CATV, select"AUTO PRESETCH

(CATV)".

• Scanning and memorizing the channels automatically

start.

e.g.) digital TV mode

AUTOPRESET CH(DTV)

I : i i

D25

• When the scanning and memorizing are completed,

the lowest memorized channel will be displayed.

• When you selected "AUTO PRESET CH(TV/DTV)", the

lowest memorized analog channel will be displayed

when the scanning and memorizing are completed.

If there is no analog channel, the lowest memorized

digital channel will be displayed.

i:Pi

i!iiii!i_

iiiiiill

EN

[] Language Selection

Youcan chooseEnglish, Spanish,or Frenchasyour on-screen language,

Note:

• If you connect the cable system directly, contact the CATV

installer.

• If you press [POWER] or [SETUP] during auto channel scan,

the setting will be canceled.

• When no channel can be received by auto channel scan,

"NO TV SIGNALS" will be displayed on the TV screen.

• Channel settings will be saved even if the power fails.

• If you have Spanish or French menus and need English,

press [SETUP]. Use [Cursor Air] to select "IDIOMA"

or "LANGAGE'[ Press [ENTER] to select "ENGLISH" Press

[SETUP] to remove the main menu.

• With regard only to the digital channel, even after the

scanning is complete if you unplug the AC power cord

before turning off the unit by pressing [POWER], the

channel setting may be lost.

Press [SETUP] to display the main menu.

2 Use [Cursor AIr] to select"LANGUAGE", then press

[ENTER] repeatedly to change the setting.

or

e.g.) digital TV mode

- TVSETUP -

CHANNEL SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

COLOR TEMF_ [NORMAL]

DTVCC

NGUSH]

SPAI_IOL]

RAN(_.AB]

3 Press [SETUP] to exit.

EN

[] Channel Selection

Selectchannelsbyusing[CH.A/V] or[the Numberbuttons].

• To select the memorized channels, use [CH. A/V] or

[the Number buttons].

• To select the non-memorized channels, use

[the Number buttons].

To Use [the Number buttons]

-When selecting analog channel 12

-When selecting digital channel 12-1

Be sure to press [-1ENT.] before entering the minor

channel number. EN]_

• Press [CH. RETURN] to return to the previously

viewed channel.

• When you select a channel larger than 100, press

[+10/+100] first. Then use [the Number buttons] to

press the lower 2-digit numbers.

About digital TV broadcasting:

With its high definition broadcast, digital broadcasting

far surpasses analog broadcasting in both its picture

and sound quality.

What is the minor channel?

By using high compression technology, digital

broadcasting offers a service that enables multiple

signals to send simultaneously.

Therefore, you can select more than one program per

major channel since digital broadcasting technology

distinguishes between multiple channels broadcast by

a single network.

NTSC(analog mode) [Air Timel ATSC(digital mode)

18:00

18:30

19:00

19:30

20:00

20:30

-- L i i

major channel minor channel

_1_ : change automatically

_> :change manually by using [CH. A/V]

Although, you cannot watch the high definition TV

(HDTV) program, the unit converts the HDTV signal

down to the standard definition TV signal.

ote:

"NOSIGNAL"will appear on the TVscreen after the minor

channel broadcast isover.

[] Volume Adjustment

Thissectiondescribeshowto adjustthe volume.Themutefunction,which

turnsthesoundoffand on,isalsodescribed.

Use [VOL _ '_,,/] to adjust the audio volume.

or

VOLUME 20

IIIIII ..........

• The volume bar will be displayed at the bottom of the

TV screen when adjusting the volume.

• The volume bar display will automatically disappear in

a few seconds.

Press [MUTE] to turn offand on the sound.

i_iiiiii!

I IE;_

MUTE

MUTE 20

IIIIII ..........

• "MUTE" is displayed on the TV screen for a few

seconds.

Press [MUTE] again or use [VOL. _ '_,,/] to recover the

original volume.

i_i!!!!i

C!ii

i:Ei

i!iiii!i_

EN

[] Switching Each Mode

Youcaneasilyswitchwiththe remotecontroltothe DTV(ATSC)andTV

(NTSC)ortoaccessanexternaldevicewhentheyareconnectedtothe unit.

[] Switching Audio Mode

Thissectiondescribeshowto switchthe audiointheanalogmodeandhow

toswitchthe audiolanguageinthe digitalmode.

Press [INPUT] repeatedly to cycle through input

modes.

[ANALOG MODE]

INPUT [DIGITAL MODE]

[VIDEO1]

4

[VIDEO2]

• To use the video or S-video input jack on the unit,

select'VIDEO1".

• To use the component video input jack on the unit,

select'VIDEO2".

While receiving an MTS broadcast, press [AUDIO]

repeatedly to cycle through the available audio

channel.

AUDIO IT:MAIN]

[_ONO]

MAIN : Outputs main-audio

SAP : Outputs second audio program

MONO : Outputs mono-audio

•The information display will automatically disappear

in a few seconds.

Note:

• Whenyou switch theanalog mode to the digital mode,

it may take a while until the digital channel selection is

completed. Thefollowing TVscreenis displayed while

switching the mode.

NOWSCANNING

Press [AUDIO] to display the currently selected

language and the number of available languages.

AUDIO

2 Press [AUDIO] repeatedly to cycle through the available

audio languages.

AUDIO

• Available languages differ depending on the

broadcast. "OTHER" is displayed when the audio

language cannot be acquired, or the acquired

languages are other than English, Spanish or French.

• The information display will automatically disappear

in a few seconds.

Note:

• Pressing[AUDIO] doesnot control external audio device.

EN

[] Screen Information

Yoncandisplaythe currentlyselectedchannelorotherinformationsuchas

the audiomodeontheTVscreen.

In theanalogmode,thecurrentchannelnumberisdisplayed.

Press [DISPLAY].

DISPLAY

CH 10

•The current channel number is displayed at the top-

right corner of the TV screen.

• To clear the display, press [DISPLAY] again.

Inthe digitalmode,thedetailedbroadcastinginformationforthe current

channelsuchasprogramtitle, programguidesaredisplayed.

Press [DISPLAY] repeatedly to cycle through the

available display modes.

[OFF]

DISPLAY

[BROADCASTINGINFORMATION]

!

[PROGRAM GUIDE]

.=1

[Broadcasting Information]

• The following information is displayed.

1 channel number

2 broadcast station

3 program title

4 audio language

(Refer to "Switching Audio Mode" on page 16.)

_iiiiiiii!

[Program Guide]

• The program guide added to broadcasting

information is displayed.

guide

C!ii

iliiii:il

Note:

•When theprogram guide consists of more than 6lines, use

[Cursor A/V] to scroll

• "No description provided"is displayed when the program

guide isnot provided.

• While the program guide is displayed, theclosed caption

function is interrupted.

• In external input mode, the following screenis displayed;

e.g.)When an external device isconnected to VIDEO1input

jack.

VIDEO 1 I

•The information display will automatically disappear in a

few seconds when the closed caption is on.

EN

[] TV Screen Display Mode

2typesofdisplaymodescanbeselectedinthedigitalmodewhenthe

broadcastingstationissending16:9videosignal.

[] Sleep Timer

Thesleeptimercanbesettoautomaticallyturnoffthe unitafteran

incrementalperiodoftime.

Press [SCREEN MODE] repeatedly to switch the TV

aspect ratio.

SCREEN

MODE

LETTERBOX ZOOM

[LETTERBOX]

Display the digital-supported program in full-screen.

Black borders will spread in the upper and lower

screen.

[ZOOM]

Enlarge and display the center area of the digital-

supported program.

The right and left side of image will be cut off.

Note:

• Youmay not switch the display mode depending on the

proqram.

Press [SLEEP] to set the sleep timer.

SLEEP

SLEEP OFF

• Sleep timer display appears on the TV screen.

2 Press [SLEEP] repeatedly to change the amount of

time until shut off.

SLEEP

SLEEP 120MIN.

• You can set your unit to turn off after a set period of

time (from 30 to 120 minutes).

• Each press of [SLEEP] will increase the time by 30

minutes.

• After set up, the sleep timer display can be called up

for checking by pressing [SLEEP].

To Cancel the Sleep Timer

Press [SLEEP] repeatedly until "SLEEP OFF" is displayed

on the TV screen.

Note:

• Thesleeptimer setting display will automatically disappear

in 10seconds.

• Whenyou disconnect the unit from theACoutlet or when a

power failure occurs, thesleep timer setting will be canceled.

EN

[] Channel Add/Delete

Thechanneladd/deletefunctionletsyouaddthechannelthatwasnot

addedbytheautochannelscandueto the receptionstatusat theinitial

setting.Youcanalsodeletetheunnecessarychannels.

1 Press [SETUP] to display the main menu.

Note:

• "ADD/DELETE(DTV)"or "ADD/DELETE"menu will disappear

automatically in a few seconds.

• In the digital mode (DTV),you can add or delete channels

only for major channel

• Onceyou delete aDTVchannel, you cannot recover the

channel without performing auto channel scan again.

(Referto "Auto Channel Scan" on page 13.)

2 Use [Cursor A/V] to select"CHANNEL SETUP", then

press [ENTER].

e.g.) digital TV mode

- TVSETUP -

or CHANNEL SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

COLOR TEMR [NORMAL]

DTVCC

3 Use [Cursor A/V] to select'ADD/DELETE(DTV)" or

"ADD/DELETE", then press [ENTER].

e.g.) digital TV mode

or

- CHANNEL SETUP -

_- ADD/DELETE (DTV)

AUTO PRESET CH (DTV)

AUTO PRESET CH (TV/DTV)

AUTO PRESET CH (CAW)

! CATV takes approx. 5Omin.

4 Select the channel you want to add or delete. (Refer to

"Channel Selection" on page 1S.)

e.g.) digital TV mode

D25

ADD/DELETE :DTV

5 Use [Cursor _1/I_] to select"ADD" or"DELETE".

or

• To add or delete another channels, repeat steps 4-5.

• Color of channel number displayed at the right top of

the TV screen indicates;

- Blue: The selected channel will be added.

- Red: The selected channel will be deleted.

6 Press [SETUP] to exit.

[] Picture Adjustment

Youcanadjustbrightness,contrast,color,tint andsharpness.

1 Press [PICTURE] to adjust the picture quality.

PC: _K/_

Use [Cursor A/V] to select the picture quality type you

want to adjust.

[BRIGHTNESS]

t

[CONTRAST]

or _

[COLOR]

t

[TINT]

t

[SHARPNESS]

_J

3 Within 5 seconds, use [Cursor _1 / I_] to adjust the

quality.

Cursor _1 Cursor I_

BRIGHTNESS to decreasebrightness to increasebrightness

CONTRAST to decrease contrast to increasecontrast

COLOR to decreasecolor to brighten color

TINT to add red to add green

SHARPNESS to make soft to make clear

Press [RETURN] to exit.

Note:

• Thepicture adjustment setting display will automatically

disappear in a few seconds.

ili!i:

i?_il

iliZ

iiB_'

EN

[] Closed Caption

Youcanviewclosedcaptioning(cc)forTVprograms,moviesandnews.

Closedcaptionreferto textof dialogueordescriptionsdisplayedon-screen

forthe hearingimpaired.

1 Press [SETUP] to display the main menu.

3 Press [SETUP] to exit.

2 Use [Cursor A/V] to select"CAPTION", then press

[ENTER] repeatedly to change the setting.

e.g.) digital TV mode

- TVSETUP -

CHANNEL SETUP

V-CHIP SETUP

LANGUAGE [ENGLISH]

CAPTION [OFF]

0 r BACK LIGHT [BRIGHT]

COLOR TEMR [NORMAL]

DTVCC

[OFF]

[CAPTION 1]

[CAPTION2]

[CAPTION3]

[CAPTION4]

[TEXT1]

[TEXT2]

!,

[TEXT3]

[TEXT4]

_.JI

[Caption Mode]

CAPTION1 and TEXT1;

are the primary caption and text services.

The captioning or text is displayed in the same

language as the program's dialogue

(up to 4 lines of script on the TV screen, where it

does not obstruct relevant parts of the picture).

CAPTION3 and TEXT3;

serve as the preferred data channels.

The captioning or text is often a secondary language.

CAPTION2, CAPTION4, TEXT2 and TEXT4;

are rarely available and broadcasters use them only

in special conditions, such as when "CAPTION1"

and "CAPTION3" or "TEXT1" and "TEXT3" are not

available.

• There are 3 display modes according to programs:

Paint-on mode:

Displays input characters on the TV screen

immediately.

Pop-on mode:

Once characters are stored in memory, they are

displayed all at once.

Roll-up mode:

Displays the characters continuously by scrolling

(max. 4 lines).

Note:

• To show the closed caption on your TVscreen, broadcast

signal must contain the closed caption data,

• Not all TVprograms and commercials have the closed

caption or all types of the closed caption,

• Captions and texts may not match the TV voice exactly,

• Changing channels may delay the closed caption for a few

seconds.

• Adjusting or muting the volume may delay the closed

caption for a few seconds.

• Abbreviations, symbols and other grammatical shortcuts

may be used in order to keep pace with the on-screen

action. This is not a problem with the unit.

• The caption or text characters will not be displayed while

the main menu or functions display is shown.

• Ifa black box appears on the TVscreen, this means that the

closed caption is set to TEXT mode. To clear the box, select

"CAPTION 1" "CAPTION 2" "CAPTION 3, "CAPTION 4" or

"OFF':

• If the unit receives poor quality television signals, the

captions may contain errors, or there might be no captions

at alL Some possible causes of poor quality signals are:

-Automobile ignition noise

- Electric motor noise

- Weak signal reception

- Multiplex signal reception (ghosts or screen flutter)

• The unit retains the closed caption setting if the power fails.

EN

Page is loading ...

Sylvania LD200SL9 Owner's manual

Sylvania LD200SL9 Owner's manual

in other languages

Related papers

Other documents