ONKYO CS-1045 Owner's manual

Category
Home audio sets
Type
Owner's manual

This manual is also suitable for

Contents
Getting Started 2
Connections 16
Basic Operations 25
Disc Playback 27
iPod/iPhone Playback 38
USB Playback 40
Listening to the Radio 43
Clock and Timer 55
Miscellaneous 62
How to reset to factory default? 62
Troubleshooting 62
Specifications 67
E
n
CD Mini HiFi Components
Instruction Manual
PHA-1045DAB
R-1045 (Stereo Receiver)
C-1045 (CD Player)
R-1045DAB (Stereo Receiver)
C-1045 (CD Player)
PHA-1045
Thank you for purchasing an Onkyo R-1045 Stereo
Receiver and C-1045 CD Player.
Please read this manual thoroughly before making
connections and plugging in the unit.
Following the instructions in this manual will enable
you to obtain optimum performance and listening
enjoyment from your new R-1045/C-1045.
Please retain this manual for future reference.
2
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloths.
7. Do not block any ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus.
When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from
tip-over.
13. Unplug this apparatus during
lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been
dropped.
15. Damage Requiring Service
Unplug the apparatus from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
A. When the power-supply cord or plug is damaged,
B. If liquid has been spilled, or objects have fallen into
the apparatus,
C. If the apparatus has been exposed to rain or water,
D. If the apparatus does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often require
extensive work by a qualified technician to restore
the apparatus to its normal operation,
E. If the apparatus has been dropped or damaged in any
way, and
F. When the apparatus exhibits a distinct change in
performance this indicates a need for service.
16. Object and Liquid Entry
Never push objects of any kind into the apparatus through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as vases
shall be placed on the apparatus.
Don’t put candles or other burning objects on top of this
unit.
17. Batteries
Always consider the environmental issues and follow
local regulations when disposing of batteries.
18. If you install the apparatus in a built-in installation, such
as a bookcase or rack, ensure that there is adequate
ventilation.
Leave 20 cm (8") of free space at the top and sides and 10
cm (4") at the rear. The rear edge of the shelf or board
above the apparatus shall be set 10 cm (4") away from the
rear panel or wall, creating a flue-like gap for warm air to
escape.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
PORTABLE CART WARNING
S3125A
Precautions
3
1. Recording Copyright—Unless it’s for personal use
only, recording copyrighted material is illegal without the
permission of the copyright holder.
2.
AC Fuse—The AC fuse inside the unit is not
userserviceable. If you cannot turn on the unit, contact
your Onkyo dealer.
3.
Care—Occasionally you should dust the unit all over
with a soft cloth. For stubborn stains, use a soft cloth
dampened with a weak solution of mild detergent and
water. Dry the unit immediately afterwards with a clean
cloth. Don’t use abrasive cloths, thinners, alcohol, or other
chemical solvents, because they may damage the finish or
remove the panel lettering.
4.
Power
WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST
TIME, READ THE FOLLOWING SECTION
CAREFULLY.
AC outlet voltages vary from country to country. Make
sure that the voltage in your area meets the voltage
requirements printed on the unit’s rear panel (e.g., AC 230
V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit from
the AC power source. Make sure that the plug is readily
operable (easily accessible) at all times.
Pressing the [ON/STANDBY] button to select Standby
mode does not fully shutdown the unit. If you do not
intend to use the unit for an extended period, remove the
power cord from the AC outlet.
5.
Never Touch this Unit with Wet Hands—Never
handle this unit or its power cord while your hands are wet
or damp. If water or any other liquid gets inside this unit,
have it checked by your Onkyo dealer.
6.
Preventing Hearing Loss
Caution
Excessive sound pressure from earphones and headphones
can cause hearing loss.
7.
Batteries and Heat Exposure
Warning
Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat as sunshine, fire or the like.
8.
Handling Notes
If you need to transport this unit, use the original
packaging to pack it how it was when you originally
bought it.
Do not leave rubber or plastic items on this unit for a
long time, because they may leave marks on the
case.
This unit’s top and rear panels may get warm after
prolonged use. This is normal.
If you do not use this unit for a long time, it may not
work properly the next time you turn it on, so be sure
to use it occasionally.
When you’ve finished using this unit, remove all
discs and turn off the power.
9.
Installing this Unit
Install this unit in a well-ventilated location.
Ensure that there’s adequate ventilation all around
this unit, especially if it’s installed in an audio rack.
If the ventilation is inadequate, the unit may
overheat, leading to malfunction.
Do not expose this unit to direct sunlight or heat
sources, because its internal temperature may rise,
shortening the life of the optical pickup.
Avoid damp and dusty places, and places subject to
vibrations from loudspeakers.
Never put the unit on top of, or directly above a
loudspeaker.
Install this unit horizontally. Never use it on its side
or on a sloping surface, because it may cause a
malfunction.
If you install this unit near a TV, radio, or VCR, the
picture and sound quality may be affected. If this
occurs, move this unit away from the TV, radio, or
VCR.
10.
Moisture Condensation
Moisture condensation may damage this unit.
Read the following carefully:
Moisture may condense on the lens of the optical pickup,
one of the most important parts inside this unit.
Moisture condensation can occur in the following
situations:
- The unit is moved from a cold place to a warm
place.
- A heater is turned on, or cold air from an air
conditioner is hitting the unit.
- In the summer, when this unit is moved from an
air conditioned room to a hot and humid place.
- The unit is used in a humid place.
Do not use this unit when there’s the possibility of
moisture condensation occurring. Doing so may
damage your discs and certain parts inside this unit.
If condensation does occur, remove all discs and leave this
unit turned on for two to three hours.
By this time, the unit will have warmed up and any
condensation will have evaporated.
Precautions—Continued
4
This unit contains a semiconductor laser system and is
classified as a “CLASS 1 LASER PRODUCT”. So, to use
this model properly, read this Instruction Manual carefully. In
case of any trouble, please contact the store where you
purchased the unit.
To prevent being exposed to the laser beam, do not try to open
the enclosure.
CAUTION:
CLASS 1M VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS.
THIS PRODUCT UTILIZES A LASER. USE OF
CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
The label on the right is applied on the
rear panel.
1. This unit is a CLASS 1 LASER PRODUCT and employs
a laser inside the cabinet.
2. To prevent the laser from being exposed, do not remove
the cover. Refer servicing to qualified personnel.
For British models
Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by qualified
service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with
the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
IMPORTANT
The plug is fitted with an appropriate fuse. If the fuse needs to
be replaced, the replacement fuse must approved by ASTA or
BSI to BS1362 and have the same ampere rating as that
indicated on the plug.
Check for the ASTA mark or the BSI mark on the body of the
fuse.
If the power cord’s plug is not suitable for your socket outlets,
cut it off and fit a suitable plug. Fit a suitable fuse in the plug.
For European Models
Declaration of Conformity
We, ONKYO EUROPE
ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY
declare in own responsibility, that the ONKYO
product described in this instruction manual is in
compliance with the corresponding technical
standards such as EN60065, EN55013, EN55020
and EN61000-3-2, -3-3.
GROEBENZELL,
GERMANY
ONKYO EUROPE ELECTRONICS GmbH
5
Features
Amplifier
•VLSC
*1
(Vector Linear Shaping Circuitry)
Discrete Output Stage Circuitry
Optimum Gain Volume Circuitry
Direct Mode
Tone Control and Balance
3 Audio Inputs and 1 Output
PHONO(MM) Input
Subwoofer Pre Output
Coaxial and Optical Digital Input
Headphone Jack
iPod/iPhone
Compatible iPod
*2
models
Made for:
iPod touch (1st and 2nd generation)
iPod classic
iPod (5th generation)
iPod nano (1st, 2nd, 3rd, 4th and 5th generation)
iPhone 3GS
iPhone 3G
iPhone
USB Interface
* About FAT
Supports FAT16 and 32.
Supports up to 499 files per folder.
Supports up to 499 folders.
* MP3 decoder
Supports MPEG Audio 1, 2 and 2.5.
Supports Layer 1, 2 and 3.
Supports sample rates 8 k, 16 k, 32 k, 11.025 k,
22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.
Supports bit rates 8 to 320 kbps and VBR (Variable
Bit Rate).
* WMA
*3
decoder
Supports WMA Ver. 9 standard.
Does not support DRM.
Supports sample rates 8 k, 16 k, 32 k, 11.025 k,
22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.
Supports bit rates 5 to 384 kbps and VBR (Variable
Bit Rate).
* AAC decoder
Supports MPEG4 AAC-LC encoded by iTunes.
Does not support DRM.
Supports sample rates 8 k, 16 k, 32 k, 11.025 k,
22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.
Supports bit rates 8 to 320 kbps and VBR (Variable
Bit Rate).
Tuner & Other
4-Mode Timer (Once, Every, Everyday or Day Set)
Sleep Timer
Battery-Free Memory Backup
Aluminium Front/Side panel and Volume knob
40 FM/AM Presets
40 FM/AM, 40 DAB/DAB+ Presets (R-1045DAB
only)
3-Mode Dimmer
CD Player
•VLSC
*1
(Vector Linear Shaping Circuitry)
Massive Power Transformer
Wolfson 192 kHz/24-Bit D/A Converter
Audiophile-Grade Capacitors
Coaxial Digital Output
Plays Audio CD, MP3/WMA CD, CD-R/RWs
Quick Navigation for MP3/WMA CD Playback
2 Repeat Modes (Track/Full)
25 Track Programming
Hi-Rigidity, Anti-Resonant Chassis
Aluminium Front Panel
RI-Compatible Remote Control
3-Mode Dimmer
*1 VLSC and the VLSC logo are registered trade-
marks of Onkyo Corporation.
*2 iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries.
"Made for iPod" and "Made for iPhone" mean that
an electronic accessory has been designed to con-
nect specifically to iPod or iPhone, respecively,
and has been certified by the developer to meet
Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards.
*3 Windows Media is a registered trademark or trade-
mark of Microsoft Corporation in the United States
and/or in other countries.
6
Supplied Accessories
Make sure you have the following accessories:
Remote controller and two batteries
(R03/AAA)
The battery is not supplied with products for China.
Indoor FM antenna
AM loop antenna
DAB antenna (R-1045DAB)
Coaxial digital audio cable (1 m)
cable (80 cm)
To use , the CD Player must be connected with
a cable.
* In catalogs and on packaging, the letter at the end
of the product name indicates the color. Specifica-
tions and operations are the same regardless of
color.
7
Contents
Getting Started
Important Safety Instructions.................................. 2
Precautions ............................................................ 3
Features ................................................................. 5
Supplied Accessories ............................................. 6
Before Using the Stereo Receiver .......................... 8
Installing the Batteries...................................... 8
Using the Remote Controller............................ 8
Getting to Know the Stereo Receiver and CD Player
..... 9
Names of Each Part (Stereo Receiver)............ 9
Names of Each Part (CD Player) ................... 10
Remote Controller.......................................... 12
Disc Notes ............................................................ 14
Connections
Connecting the CD Player.................................... 16
C-1045 Connections ...................................... 16
RI Connections .............................................. 16
Connecting Antennas ........................................... 17
Connecting the Indoor FM Antenna ............... 17
Connecting the AM Loop Antenna ................. 17
Connecting an Outdoor FM Antenna ............. 18
Connecting an Outdoor AM Antenna ............. 18
Connecting the DAB Antenna (R-1045DAB only)
.. 18
Connecting Speakers ........................................... 19
Connecting Your Speakers............................. 19
Connecting Other Components ............................ 20
About Connections......................................... 20
Connecting a Subwoofer................................ 20
Connecting a Digital Playback Component ... 21
Connecting a Component with a Anaolog Audio
Output ............................................................ 21
Connecting the Power Cord ................................. 22
First Time Setup ................................................... 23
Setting the Clock with the AccuClock Function
..... 23
Setting APD (Auto Power Down) ................... 24
Changing the Selector Name......................... 24
Basic Operations
Basic Operations .................................................. 25
Turning On the Stereo Receiver..................... 25
Turning On CD Player.................................... 25
Adjusting the Volume ..................................... 25
Selecting the Input Source............................. 25
Using Headphones ........................................ 26
Muting the Sound........................................... 26
Adjusting the Bass, Treble and Balance ........ 26
Using the Direct Function............................... 26
Disc Playback
Disc Playback ....................................................... 27
Using the Remote Controller.......................... 28
Displaying CD Information ............................. 28
Selecting Files (MP3/WMA CDs) ................... 29
Selection a Folder during Playback (Search
Mode) ............................................................. 31
Displaying MP3/WMA Information ................. 32
Various Playback Modes ...................................... 33
Random Playback .......................................... 33
Memory Playback (For Audio CDs)................ 33
Memory Playback (For MP3/WMA CDs)........ 34
Repeat Playback ............................................ 35
Setting for MP3/WMA ........................................... 36
Setting for MP3/WMA Preferences ................ 36
iPod/iPhone Playback
iPod/iPhone Playback........................................... 38
Playing iPod/iPhone ....................................... 39
USB Playback
USB Playback....................................................... 40
Random Playback .......................................... 41
Select the type of Repeat Playback ............... 41
Displaying MP3/WMA/AAC Information ......... 42
Listening to the Radio
Listening to the Radio........................................... 43
Tuning into FM/AM Radio Stations................. 43
Displaying Radio Information ......................... 44
Receiving RDS............................................... 44
Listening to DAB Digital Radio (R-1045DAB only)
.. 45
Presetting FM/AM Stations Automatically (Auto
Preset)............................................................ 48
Presetting FM/AM/DAB Stations Manually (DAB
is only available in R-1045DAB)..................... 49
Selecting Preset Stations ............................... 50
Naming Presets.............................................. 51
Copying Presets............................................. 52
Erasing a Preset's Name................................ 53
Erasing Presets.............................................. 54
Clock and Timer
Setting the Clock .................................................. 55
Setting AccuClock Using a Specific Station ... 55
Setting the Clock Manually............................. 56
Using the Timers .................................................. 57
About the Timers ............................................ 57
Programming the Timers................................ 58
Turning Timers On and Off............................. 60
Checking Timer Settings ................................ 60
Using the Sleep Timer.................................... 61
Miscellaneous
Troubleshooting.................................................... 62
How to reset to factory default? ..................... 62
Specifications........................................................ 67
8
Before Using the Stereo Receiver
Installing the Batteries
Notes
If the remote controller doesn’t work reliably, try
replacing the batteries.
Don’t mix new and old batteries or different types of
batteries.
If you intend not to use the remote controller for a
long time, remove the batteries to prevent damage
from leakage or corrosion.
Expired batteries should be removed as soon as
possible to prevent damage from leakage or
corrosion.
Using the Remote Controller
When you operate the remote controller, point it at the
stereo receivers remote control sensor, as shown
below.
Notes
The remote controller may not work reliably if the
stereo receiver and the CD Player are subjected to
bright light, such as direct sunlight or inverter-type
fluorescent lights. Keep this in mind when installing.
If another remote controller of the same type is used
in the same room, or the stereo receiver is installed
close to equipment that uses infrared rays, the
remote controller may not work reliably.
Don’t put anything, such as a book, on the remote
controller because the buttons may be pressed
inadvertently, thereby draining the batteries.
The remote controller may not work reliably if the
stereo receiver and the CD Player are installed in a
rack behind colored glass doors. Keep this in mind
when installing.
The remote controller will not work if there’s an
obstacle between it and the stereo receiver and CD
Players remote control sensor.
The CD Player cannot be controlled using the remote
controller without connecting to the stereo receiver
via the cable.
1
To open the battery compartment,
press the small hollow and slide
open the cover.
2
Insert two batteries (R03/AAA) into
the compartment.
Carefully follow the polarity diagram
(positive (+) and negative (–) symbols)
inside the battery compartment.
The battery is not supplied with products
for China.
3
Slide the cover shut.
A
p
p
r
o
x
.
5
m
(
1
6
f
t
.
)
Remote control sensor
9
Getting to Know the Stereo Receiver and CD Player
Names of Each Part (Stereo Receiver)
Front Panel
STANDBY LED
DISPLAY
VOLUME
ON/STANDBY
iPod/USB
MODE/RETURN
MULTI JOG
INPUT
BASS/TREBLE/BALANCE
-/+
DIRECT
DIRECT LED
PHONES
Rear Panel
AM ANTENNA
DAB ANTENNA
R-1045DAB only
OPTICAL
GND
SPEAKERS L+/L-/R+/R-
AC INLET
FM ANTENNA
CD/COAXIAL
PHONO IN
LINE1 IN
LINE2 OUT
LINE2 IN
LINE3 IN
REMOTE CONTROL
SUBWOOFER PREOUT
Getting to Know the Stereo Receiver and CD Player—Continued
10
Names of Each Part (CD Player)
Front Panel
ON/STANDBY
Disc tray
Open/Close[ ] button
[ ]/[ ] buttons
STANDBY LED
Display
Pause [ ] button
Stop [ ] button
Play [ ] button
Rear Panel
ANALOG AUDIO OUTPUT
DIGITAL AUDIO OUTPUT COAXIAL
REMOTE CONTROL
AC INLET
Getting to Know the Stereo Receiver and CD Player—Continued
11
Display
R-1045/1045DAB
SLEEP indicator
Play [ ] and pause [ ] indicators
USB indicator
File format indicators
MP3
WMA
PCM
FOLDER indicator
DIRECT indicator
FILE indicator
MUTING indicator
Playback mode indicators
1FOLDER
MEMORY
RANDOM
REPEAT
REPEAT 1
TIMER indicators
TIMER
1, 2, 3, 4
Tuning indicators
AUTO
FM ST
DAB (R-1045DAB only)
RDS
Message area
TRACK indicator
TITLE, ARTIST, and ALBUM indicators
C-1045
Play and pause indicators
File format indicators
MP3
WMA
FOLDER indicator
FILE indicator
TRACK indicator
Playback mode indicators
MEMORY
RANDOM
REPEAT
REPEAT1
Message area
TITLE, ARTIST, and ALBUM indicators
DISC, TOTAL indicators
REMAIN indicator
Getting to Know the Stereo Receiver and CD Player—Continued
12
Remote Controller
Getting to Know the Stereo Receiver and CD Player—Continued
13
ON/STANDBY
Used to set the stereo receiver to On or Standby.
SLEEP
Used to set and release the setting and display the
status of sleep timer.
DIMMER
Used to change the display brightness.
DISPLAY
Used to indicate the CD or USB elapsed time and
the frequency of radio.
iPod/USB
Used to playback iPod/iPhone and USB.
TUNER
Selects AM, FM, or DAB (R-1045DAB only) as
the input source and play.
LINE1
Used to switch the source selector to LINE1.
LINE2
Used to switch the source selector to LINE2.
CD/COAX
Used to switch the source selector to CD/COAX.
OPTICAL
Used to switch the source selector to OPTICAL.
RANDOM
Used to start random playback when CD/COAX or
USB is selected.
REPEAT
Used to start repeat playback when CD/COAX or
USB is selected.
TIMER
Show the status of the timers.
MENU/NO
Use to display the menu.
FOLDER /
Used to switch the folder of CD (MP3, WMA) and
USB.
[]
Used to pause iPod/iPhone, CD and USB playback.
[]
Used to playback iPod/iPhone, and CD and USB.
[]/[]
Used to switch the iPod/iPhone, CD, USB tracks
and preset channel of radio.
[]
Used to stop iPod/iPhone, CD and USB.
[]/[]
Used to rewind or fast forward CD, USB play back
and adjust the radio tuning.
VOLUME
Adjust the volume level.
DIRECT
Used to invalidate the tone control.
Number buttons
CLEAR
OPEN/CLOSE (C-1045)
Used to open and close the disc tray.
CLOCK CALL
Calls up the clock to display the day and time.
PHONO
Used to switch the source selector to PHONO.
LINE3
Used to switch the source selector to LINE3.
MEMORY
Used to memory playback of CD.
MODE/YES
Used to switch the tuning mode of AM, FM and
DAB (R-1045DAB only).
MUTING
Mutes the output of the receiver.
FOLDER
14
Disc Notes
Precautions for Playback
Compact discs (CDs) with the following logo on the
label surface can be used.
Do not use discs designed for purposes other than
audio, such as CD-ROMs for PC use. Abnormal noise
could damage the speakers or amplifier.
* This CD player supports CD-R and CD-RW discs.
Note that some discs may not playback because of
the disc characteristics, scratches, contamination or
the recording state. A disc recorded with an audio
CD record will not playback unless it is finalized.
Never use discs which have a special shape (such as
hearts or octagons). These types of discs could jam and
damage the CD player. Playback of copy-controlled
audio CDs.
CD playback with copy-control function
Some audio CDs with copy-control function do not
comply with official CD standards. These are special
discs and cannot be played with this CD player.
Playback of MP3 and WMA Discs
MP3 and WMA files recorded on a CD-R/CD-RW can
be played with this CD player.
Use discs which have been recorded following the
ISO9660 Level 2 file system. (The supported
directory depth is eight levels, the same as ISO9660
Level 1)
Discs recorded with the hierarchical file system
(HFS) cannot be played.
Up to 99 folders (including the root folder), and up
to 499 files (including root) and files can be
recognized and played.
Always close the disc tray.
Notes
A disc recorded with a recorder or personal
computer may not play in some cases. (Cause: Disc’s
characteristics, damaged or dirty disc, dirt on
players lens, dew condensation, etc.)
A disc recorded on a personal computer may not
play because of the application settings or
environment. Record the disc with the proper format.
(Contact the application maker for details.)
A disc with insufficient storage capacity may not
play back properly.
Playback of MP3 Discs
Only MP3 files with the extension “.MP3” or
“. mp3” are supported.
This CD player supports files recorded in MPEG 1
Audio Layer 3 (32-320kbps), with the sampling
frequency of 32/44.1/48kHz.
Variable bitrates (VBR) between 32kbps and
320kbps are supported. The time information during
VBR playback may not display correctly.
Playback of WMA Discs
WMA stands for “Windows Media® Audio”, an
audio compression technology developed by
Microsoft Corporation USA.
Only WMA files with the extension “.WMA” or
“.wma” are supported.
Encode the WMA file with an application approved
by Microsoft Corporation USA. The file may not
playback correct if encoded with an unapproved
application.
Variable bitrates (VBR) between 64kbps and
160kbps (32/44.1/48kHz) are supported.
Copyright-protected WMA files cannot be played
back.
WMA Pro, Lossless and Voice are not supported.
* Windows Media is a registered trademark or
trademark of Microsoft Corporation in the United
States and/or in other countries.
Disc Notes—Continued
15
Handling Discs
Hold discs by the edge, or by the center hold and edge.
Avoid touching the playback surface (surface with
nothing printed on it).
Do not attach paper or stickers, or write on the
playback or label surface of the disc. Take care not to
scratch or damage the disc.
Precautions for Rental Discs
Do not use discs with residue from cellophane tape,
rental discs with labels which are peeling off, or discs
with decorative labels. This type of disc could get stuck
in the CD player, or could damage the CD player.
Precautions for Inkjet Printable Discs
Do not leave a CD-R/CR-RW having a label printed
with an inkjet printer in the CD player for a long time.
The disc could get stuck in the CD player, or could
damage the CD player.
Remove the disc from the CD player when not being
played, and store it in a case. A freshly printed disc will
stick easily, and should not be played immediately.
Caring for Discs
If the disc is dirty, the CD player will have a hard time
reading signals, and the audio quality may drop. If the
disc is dirty, gently wipe off fingerprints and dust with
a soft cloth. Lightly wipe from the center outwards.
To remove stubborn dust or dirt, wipe
the disc with a soft cloth dampened
with water, and then dry it with a dry
cloth. Do not use cleaning spray for
analog records or antistatic agents, etc.
Never use volatile chemicals such as
benzine or paint thinner as they can impregnate the disc
surface.
Label surface
(printed surface)
Playback
surface
16
Connecting the CD Player
C-1045 Connections
Don’t connect the power cord until you’ve
completed and double-checked all connections.
Use the coaxial cable included in the package.
The analog audio cable can be used instead.
Push plugs in all the way to make good connections
(loose connections can cause noise or malfunctions).
To prevent interference, keep audio cables away
from power cords and speaker cables.
Notes
The analog audio cable is not supplied.
Caution
When installing the unit, put the stereo receiver on top of the CD Player. Do not put anything on the stereo receiver.
Connections
With (Remote Interactive) you can control the R-1045 together with C-1045. With R-1045 you can use one remote
controller to C-1045.
Notes
Use only cables for connections.
It is not necessary to use the cable when using the coaxial cable.
Left (white)
Right (red)
Analog audio
cable
Left (white)
Right (red)
Analog
audio cable
R
L
Coaxial cable
cable
: Signal flow
R-1045
C-1045
17
Connecting Antennas
This section explains how to connect the supplied
indoor FM antenna and AM loop antenna, and how to
connect commercially available outdoor FM and AM
antennas.
The receiver won’t pick up any radio signals without
an antenna connected, so you must connect the antenna
to use the tuner.
Connecting the Indoor FM Antenna
The supplied indoor FM antenna is for indoor use only.
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available
outdoor FM antenna instead (see page 18).
Connecting the AM Loop Antenna
The supplied indoor AM loop antenna is for indoor use
only.
If you cannot achieve good reception with the supplied
indoor AM loop antenna, try using it with a
commercially available outdoor AM antenna (see page
18).
1
Attach the FM antenna, as shown.
Once the receiver is ready for use, you’ll
need to tune into an FM radio station and
adjust the position of the FM antenna to
achieve the best possible reception.
2
Use thumbtacks or something
similar to fix the FM antenna into
position.
Caution
Be careful that you don’t injure yourself
when using thumbtacks.
DAB antenna jack (R-1045DAB only)
AM antenna jack
FM antenna jack
Insert the plug fully
into the jack.
Thumbtacks, etc.
1
Assemble the AM loop antenna,
inserting the tabs into the base, as
shown.
2
Connect both wires of the AM loop
antenna to the AM push terminals,
as shown.
(The antenna’s wires are not polarity
sensitive, so they can be connected either
way around). Make sure that the wires are
attached securely and that the push
terminals are gripping the bare wires, not
the insulation.
Once the receiver is ready for use, you’ll
need to tune into an AM radio station and
adjust the position of the AM antenna to
achieve the best possible reception.
Keep the antenna as far away as possible
from the receiver, TV, speaker cables, and
power cords.
Push Insert wire Release
Connecting Antennas—Continued
18
Connecting an Outdoor FM Antenna
If you cannot achieve good reception with the supplied
indoor FM antenna, try a commercially available
outdoor FM antenna instead.
Notes
Outdoor FM antennas work best outside, but usable
results can sometimes be obtained when installed in
anattic or loft.
For best results, install the outdoor FM antenna well
away from tall buildings, preferably with a clear line
of sight to your local FM transmitter.
Outdoor antenna should be located away from
possible noise sources, such as neon signs, busy
roads, etc.
For safety reasons, outdoor antenna should be
situated well away from power lines and other high-
voltage equipment.
Outdoor antenna must be grounded in accordance
with local regulations to prevent electrical shock
hazards.
Using a TV/FM Antenna Splitter
It’s best not to use the same antenna for both FM and
TV reception, as this can cause interference problems.
If circumstances demand it, use a TV/FM antenna
splitter, as shown.
Connecting an Outdoor AM Antenna
If good reception cannot be achieved using the
supplied AM loop antenna, an outdoor AM antenna
can be used in addition to the loop antenna, as shown.
Outdoor AM antennas work best when installed
horizontally outside, but good results can sometimes be
obtained indoors by mounting horizontally above a
window. Note that the AM loop antenna should be left
connected.
Outdoor antenna must be grounded in accordance with
local regulations to prevent electrical shock hazards.
Connecting the DAB Antenna
(R-1045DAB only)
Notes
If you cannot get a good reception, adjust the position
of the antenna. (See Page 43)
Outdoor antenna
AM loop antenna
Insulated antenna cable
1
Screw the supplied DAB antenna’s
plug onto the DAB ANTENNA jack.
Once the stereo receiver is ready for use,
you’ll need to tune into a DAB station and
adjust the position of the DAB antenna to
achieve the best possible reception.
2
Use thumbtacks or something
similar to fix the DAB antenna into
position.
19
Connecting Speakers
Connecting Your Speakers
Connect the right speaker to the stereo receivers right (R) SPEAKERS terminals. Connect the left speaker to the left
(L) SPEAKERS terminals.
Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the stereo receiver.
Connect the negative (–) terminal on each speaker to the corresponding negative (–) terminal on the stereo receiver.
Use the red wires to connect the positive (+) terminals.
Connect only speakers with an impedance of
between 4 and 16 ohms. Connecting a speaker with a
lower impedance may damage the speaker.
Be careful not to short the positive and negative
wires. Doing so may damage the stereo receiver.
Do not connect both speaker cables to the same L or
R terminals (Fig. 1). Do not connect more than two
speaker terminals to each speaker (Fig. 2).
-Terminal posts-
Strip about 15 mm (5/8") of insulation from the ends of the
speaker cables, and twist the bare wires tightly. Unscrew
the terminal. Fully insert the bare wire, making sure that it’s
touching the threaded shaft in the center. Screw the
terminal tight.
Fig 1 Fig. 2
20
Connecting Other Components
About Connections
Cables and Jacks
No connecting cables are included with the stereo receiver.
Connecting a Subwoofer
The stereo receiver has a SUBWOOFER PRE OUT jack for connecting a powered subwoofer (i.e., a subwoofer with a
built-in amplifier).
Cable Jack Description
Analog audio cable
This cable carries analog audio.
Optical digital audio
cable
This cable carries digital audio.
COAXIAL digital audio
cable
This cable carries digital audio.
R
L
OPTICAL
COAXIAL
Stereo receiver
: Signal fl o w
P o w ered s u b w o o f er
LINE INPUT
LINE INPUT
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68

ONKYO CS-1045 Owner's manual

Category
Home audio sets
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI