ONKYO PHA-1045 Owner's manual

Contents

Getting Started 2

Connections 16

Basic Operations 25

Disc Playback 27

iPod/iPhone Playback 38

USB Playback 40

Listening to the Radio 43

Clock and Timer 55

Miscellaneous 62

How to reset to factory default? 62

Troubleshooting 62

Specifications 67

E

n

CD Mini HiFi Components

Instruction Manual

PHA-1045DAB

R-1045 (Stereo Receiver)

C-1045 (CD Player)

R-1045DAB (Stereo Receiver)

C-1045 (CD Player)

PHA-1045

Thank you for purchasing an Onkyo R-1045 Stereo

Receiver and C-1045 CD Player.

Please read this manual thoroughly before making

connections and plugging in the unit.

Following the instructions in this manual will enable

you to obtain optimum performance and listening

enjoyment from your new R-1045/C-1045.

Please retain this manual for future reference.

2

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloths.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has

two blades and a third grounding prong. The wide blade

or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table specified

by the manufacturer, or sold with

the apparatus.

When a cart is used, use caution

when moving the cart/apparatus

combination to avoid injury from

tip-over.

13. Unplug this apparatus during

lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been

dropped.

15. Damage Requiring Service

Unplug the apparatus from the wall outlet and refer

servicing to qualified service personnel under the

following conditions:

A. When the power-supply cord or plug is damaged,

B. If liquid has been spilled, or objects have fallen into

the apparatus,

C. If the apparatus has been exposed to rain or water,

D. If the apparatus does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as an improper adjustment of other

controls may result in damage and will often require

extensive work by a qualified technician to restore

the apparatus to its normal operation,

E. If the apparatus has been dropped or damaged in any

way, and

F. When the apparatus exhibits a distinct change in

performance this indicates a need for service.

16. Object and Liquid Entry

Never push objects of any kind into the apparatus through

openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock.

The apparatus shall not be exposed to dripping or

splashing and no objects filled with liquids, such as vases

shall be placed on the apparatus.

Don’t put candles or other burning objects on top of this

unit.

17. Batteries

Always consider the environmental issues and follow

local regulations when disposing of batteries.

18. If you install the apparatus in a built-in installation, such

as a bookcase or rack, ensure that there is adequate

ventilation.

Leave 20 cm (8") of free space at the top and sides and 10

cm (4") at the rear. The rear edge of the shelf or board

above the apparatus shall be set 10 cm (4") away from the

rear panel or wall, creating a flue-like gap for warm air to

escape.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO

RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS

OUVRIR

AVIS

PORTABLE CART WARNING

S3125A

Precautions

3

1. Recording Copyright—Unless it’s for personal use

only, recording copyrighted material is illegal without the

permission of the copyright holder.

2.

AC Fuse—The AC fuse inside the unit is not

userserviceable. If you cannot turn on the unit, contact

your Onkyo dealer.

3.

Care—Occasionally you should dust the unit all over

with a soft cloth. For stubborn stains, use a soft cloth

dampened with a weak solution of mild detergent and

water. Dry the unit immediately afterwards with a clean

cloth. Don’t use abrasive cloths, thinners, alcohol, or other

chemical solvents, because they may damage the finish or

remove the panel lettering.

4.

Power

WARNING

BEFORE PLUGGING IN THE UNIT FOR THE FIRST

TIME, READ THE FOLLOWING SECTION

CAREFULLY.

AC outlet voltages vary from country to country. Make

sure that the voltage in your area meets the voltage

requirements printed on the unit’s rear panel (e.g., AC 230

V, 50 Hz or AC 120 V, 60 Hz).

The power cord plug is used to disconnect this unit from

the AC power source. Make sure that the plug is readily

operable (easily accessible) at all times.

Pressing the [ON/STANDBY] button to select Standby

mode does not fully shutdown the unit. If you do not

intend to use the unit for an extended period, remove the

power cord from the AC outlet.

5.

Never Touch this Unit with Wet Hands—Never

handle this unit or its power cord while your hands are wet

or damp. If water or any other liquid gets inside this unit,

have it checked by your Onkyo dealer.

6.

Preventing Hearing Loss

Caution

Excessive sound pressure from earphones and headphones

can cause hearing loss.

7.

Batteries and Heat Exposure

Warning

Batteries (battery pack or batteries installed) shall not be

exposed to excessive heat as sunshine, fire or the like.

8.

Handling Notes

• If you need to transport this unit, use the original

packaging to pack it how it was when you originally

bought it.

• Do not leave rubber or plastic items on this unit for a

long time, because they may leave marks on the

case.

• This unit’s top and rear panels may get warm after

prolonged use. This is normal.

• If you do not use this unit for a long time, it may not

work properly the next time you turn it on, so be sure

to use it occasionally.

• When you’ve finished using this unit, remove all

discs and turn off the power.

9.

Installing this Unit

• Install this unit in a well-ventilated location.

• Ensure that there’s adequate ventilation all around

this unit, especially if it’s installed in an audio rack.

If the ventilation is inadequate, the unit may

overheat, leading to malfunction.

• Do not expose this unit to direct sunlight or heat

sources, because its internal temperature may rise,

shortening the life of the optical pickup.

• Avoid damp and dusty places, and places subject to

vibrations from loudspeakers.

Never put the unit on top of, or directly above a

loudspeaker.

• Install this unit horizontally. Never use it on its side

or on a sloping surface, because it may cause a

malfunction.

• If you install this unit near a TV, radio, or VCR, the

picture and sound quality may be affected. If this

occurs, move this unit away from the TV, radio, or

VCR.

10.

Moisture Condensation

Moisture condensation may damage this unit.

Read the following carefully:

Moisture may condense on the lens of the optical pickup,

one of the most important parts inside this unit.

• Moisture condensation can occur in the following

situations:

- The unit is moved from a cold place to a warm

place.

- A heater is turned on, or cold air from an air

conditioner is hitting the unit.

- In the summer, when this unit is moved from an

air conditioned room to a hot and humid place.

- The unit is used in a humid place.

• Do not use this unit when there’s the possibility of

moisture condensation occurring. Doing so may

damage your discs and certain parts inside this unit.

If condensation does occur, remove all discs and leave this

unit turned on for two to three hours.

By this time, the unit will have warmed up and any

condensation will have evaporated.

Precautions—Continued

4

This unit contains a semiconductor laser system and is

classified as a “CLASS 1 LASER PRODUCT”. So, to use

this model properly, read this Instruction Manual carefully. In

case of any trouble, please contact the store where you

purchased the unit.

To prevent being exposed to the laser beam, do not try to open

the enclosure.

CAUTION:

CLASS 1M VISIBLE AND INVISIBLE LASER

RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY

WITH OPTICAL INSTRUMENTS.

THIS PRODUCT UTILIZES A LASER. USE OF

CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.

The label on the right is applied on the

rear panel.

1. This unit is a CLASS 1 LASER PRODUCT and employs

a laser inside the cabinet.

2. To prevent the laser from being exposed, do not remove

the cover. Refer servicing to qualified personnel.

For British models

Replacement and mounting of an AC plug on the power

supply cord of this unit should be performed only by qualified

service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance with

the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this apparatus

may not correspond with the coloured markings identifying

the terminals in your plug, proceed as follows:

The wire which is coloured blue must be connected to the

terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the

terminal which is marked with the letter L or coloured red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse needs to

be replaced, the replacement fuse must approved by ASTA or

BSI to BS1362 and have the same ampere rating as that

indicated on the plug.

Check for the ASTA mark or the BSI mark on the body of the

fuse.

If the power cord’s plug is not suitable for your socket outlets,

cut it off and fit a suitable plug. Fit a suitable fuse in the plug.

For European Models

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH

LIEGNITZERSTRASSE 6,

82194 GROEBENZELL,

GERMANY

declare in own responsibility, that the ONKYO

product described in this instruction manual is in

compliance with the corresponding technical

standards such as EN60065, EN55013, EN55020

and EN61000-3-2, -3-3.

GROEBENZELL,

GERMANY

ONKYO EUROPE ELECTRONICS GmbH

5

Features

Amplifier

•VLSC

*1

(Vector Linear Shaping Circuitry)

• Discrete Output Stage Circuitry

• Optimum Gain Volume Circuitry

• Direct Mode

• Tone Control and Balance

• 3 Audio Inputs and 1 Output

• PHONO(MM) Input

• Subwoofer Pre Output

• Coaxial and Optical Digital Input

• Headphone Jack

iPod/iPhone

Compatible iPod

*2

models

Made for:

• iPod touch (1st and 2nd generation)

• iPod classic

• iPod (5th generation)

• iPod nano (1st, 2nd, 3rd, 4th and 5th generation)

• iPhone 3GS

• iPhone 3G

• iPhone

USB Interface

* About FAT

• Supports FAT16 and 32.

• Supports up to 499 files per folder.

• Supports up to 499 folders.

* MP3 decoder

• Supports MPEG Audio 1, 2 and 2.5.

• Supports Layer 1, 2 and 3.

• Supports sample rates 8 k, 16 k, 32 k, 11.025 k,

22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.

• Supports bit rates 8 to 320 kbps and VBR (Variable

Bit Rate).

* WMA

*3

decoder

• Supports WMA Ver. 9 standard.

• Does not support DRM.

• Supports sample rates 8 k, 16 k, 32 k, 11.025 k,

22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.

• Supports bit rates 5 to 384 kbps and VBR (Variable

Bit Rate).

* AAC decoder

• Supports MPEG4 AAC-LC encoded by iTunes.

• Does not support DRM.

• Supports sample rates 8 k, 16 k, 32 k, 11.025 k,

22.05 k, 44.1 k, 12 k, 24 k and 48 kHz.

• Supports bit rates 8 to 320 kbps and VBR (Variable

Bit Rate).

Tuner & Other

• 4-Mode Timer (Once, Every, Everyday or Day Set)

• Sleep Timer

• Battery-Free Memory Backup

• Aluminium Front/Side panel and Volume knob

• 40 FM/AM Presets

• 40 FM/AM, 40 DAB/DAB+ Presets (R-1045DAB

only)

• 3-Mode Dimmer

CD Player

•VLSC

*1

(Vector Linear Shaping Circuitry)

• Massive Power Transformer

• Wolfson 192 kHz/24-Bit D/A Converter

• Audiophile-Grade Capacitors

• Coaxial Digital Output

• Plays Audio CD, MP3/WMA CD, CD-R/RWs

• Quick Navigation for MP3/WMA CD Playback

• 2 Repeat Modes (Track/Full)

• 25 Track Programming

• Hi-Rigidity, Anti-Resonant Chassis

• Aluminium Front Panel

• RI-Compatible Remote Control

• 3-Mode Dimmer

*1 VLSC and the VLSC logo are registered trade-

marks of Onkyo Corporation.

*2 iPhone, iPod, iPod classic, iPod nano, and iPod

touch are trademarks of Apple Inc., registered in

the U.S. and other countries.

"Made for iPod" and "Made for iPhone" mean that

an electronic accessory has been designed to con-

nect specifically to iPod or iPhone, respecively,

and has been certified by the developer to meet

Apple performance standards.

Apple is not responsible for the operation of this

device or its compliance with safety and regulatory

standards.

*3 Windows Media is a registered trademark or trade-

mark of Microsoft Corporation in the United States

and/or in other countries.

6

Supplied Accessories

Make sure you have the following accessories:

Remote controller and two batteries

(R03/AAA)

The battery is not supplied with products for China.

Indoor FM antenna

AM loop antenna

DAB antenna (R-1045DAB)

Coaxial digital audio cable (1 m)

cable (80 cm)

• To use , the CD Player must be connected with

a cable.

* In catalogs and on packaging, the letter at the end

of the product name indicates the color. Specifica-

tions and operations are the same regardless of

color.

7

Contents

Getting Started

Important Safety Instructions.................................. 2

Precautions ............................................................ 3

Features ................................................................. 5

Supplied Accessories ............................................. 6

Before Using the Stereo Receiver .......................... 8

Installing the Batteries...................................... 8

Using the Remote Controller............................ 8

Getting to Know the Stereo Receiver and CD Player

..... 9

Names of Each Part (Stereo Receiver)............ 9

Names of Each Part (CD Player) ................... 10

Remote Controller.......................................... 12

Disc Notes ............................................................ 14

Connections

Connecting the CD Player.................................... 16

C-1045 Connections ...................................... 16

RI Connections .............................................. 16

Connecting Antennas ........................................... 17

Connecting the Indoor FM Antenna ............... 17

Connecting the AM Loop Antenna ................. 17

Connecting an Outdoor FM Antenna ............. 18

Connecting an Outdoor AM Antenna ............. 18

Connecting the DAB Antenna (R-1045DAB only)

.. 18

Connecting Speakers ........................................... 19

Connecting Your Speakers............................. 19

Connecting Other Components ............................ 20

About Connections......................................... 20

Connecting a Subwoofer................................ 20

Connecting a Digital Playback Component ... 21

Connecting a Component with a Anaolog Audio

Output ............................................................ 21

Connecting the Power Cord ................................. 22

First Time Setup ................................................... 23

Setting the Clock with the AccuClock Function

..... 23

Setting APD (Auto Power Down) ................... 24

Changing the Selector Name......................... 24

Basic Operations

Basic Operations .................................................. 25

Turning On the Stereo Receiver..................... 25

Turning On CD Player.................................... 25

Adjusting the Volume ..................................... 25

Selecting the Input Source............................. 25

Using Headphones ........................................ 26

Muting the Sound........................................... 26

Adjusting the Bass, Treble and Balance ........ 26

Using the Direct Function............................... 26

Disc Playback

Disc Playback ....................................................... 27

Using the Remote Controller.......................... 28

Displaying CD Information ............................. 28

Selecting Files (MP3/WMA CDs) ................... 29

Selection a Folder during Playback (Search

Mode) ............................................................. 31

Displaying MP3/WMA Information ................. 32

Various Playback Modes ...................................... 33

Random Playback .......................................... 33

Memory Playback (For Audio CDs)................ 33

Memory Playback (For MP3/WMA CDs)........ 34

Repeat Playback ............................................ 35

Setting for MP3/WMA ........................................... 36

Setting for MP3/WMA Preferences ................ 36

iPod/iPhone Playback

iPod/iPhone Playback........................................... 38

Playing iPod/iPhone ....................................... 39

USB Playback

USB Playback....................................................... 40

Random Playback .......................................... 41

Select the type of Repeat Playback ............... 41

Displaying MP3/WMA/AAC Information ......... 42

Listening to the Radio

Listening to the Radio........................................... 43

Tuning into FM/AM Radio Stations................. 43

Displaying Radio Information ......................... 44

Receiving RDS............................................... 44

Listening to DAB Digital Radio (R-1045DAB only)

.. 45

Presetting FM/AM Stations Automatically (Auto

Preset)............................................................ 48

Presetting FM/AM/DAB Stations Manually (DAB

is only available in R-1045DAB)..................... 49

Selecting Preset Stations ............................... 50

Naming Presets.............................................. 51

Copying Presets............................................. 52

Erasing a Preset's Name................................ 53

Erasing Presets.............................................. 54

Clock and Timer

Setting the Clock .................................................. 55

Setting AccuClock Using a Specific Station ... 55

Setting the Clock Manually............................. 56

Using the Timers .................................................. 57

About the Timers ............................................ 57

Programming the Timers................................ 58

Turning Timers On and Off............................. 60

Checking Timer Settings ................................ 60

Using the Sleep Timer.................................... 61

Miscellaneous

Troubleshooting.................................................... 62

How to reset to factory default? ..................... 62

Specifications........................................................ 67

8

Before Using the Stereo Receiver

Installing the Batteries

Notes

• If the remote controller doesn’t work reliably, try

replacing the batteries.

• Don’t mix new and old batteries or different types of

batteries.

• If you intend not to use the remote controller for a

long time, remove the batteries to prevent damage

from leakage or corrosion.

• Expired batteries should be removed as soon as

possible to prevent damage from leakage or

corrosion.

Using the Remote Controller

When you operate the remote controller, point it at the

stereo receiver’s remote control sensor, as shown

below.

Notes

• The remote controller may not work reliably if the

stereo receiver and the CD Player are subjected to

bright light, such as direct sunlight or inverter-type

fluorescent lights. Keep this in mind when installing.

• If another remote controller of the same type is used

in the same room, or the stereo receiver is installed

close to equipment that uses infrared rays, the

remote controller may not work reliably.

• Don’t put anything, such as a book, on the remote

controller because the buttons may be pressed

inadvertently, thereby draining the batteries.

• The remote controller may not work reliably if the

stereo receiver and the CD Player are installed in a

rack behind colored glass doors. Keep this in mind

when installing.

• The remote controller will not work if there’s an

obstacle between it and the stereo receiver and CD

Player’s remote control sensor.

• The CD Player cannot be controlled using the remote

controller without connecting to the stereo receiver

via the cable.

1

To open the battery compartment,

press the small hollow and slide

open the cover.

2

Insert two batteries (R03/AAA) into

the compartment.

Carefully follow the polarity diagram

(positive (+) and negative (–) symbols)

inside the battery compartment.

The battery is not supplied with products

for China.

3

Slide the cover shut.

A

p

r

o

x

.

5

m

(

1

6

f

t

.

)

Remote control sensor

9

Getting to Know the Stereo Receiver and CD Player

Names of Each Part (Stereo Receiver)

Front Panel

STANDBY LED

DISPLAY

VOLUME

ON/STANDBY

iPod/USB

MODE/RETURN

MULTI JOG

INPUT

BASS/TREBLE/BALANCE

-/+

DIRECT

DIRECT LED

PHONES

Rear Panel

AM ANTENNA

DAB ANTENNA

R-1045DAB only

OPTICAL

GND

SPEAKERS L+/L-/R+/R-

AC INLET

FM ANTENNA

CD/COAXIAL

PHONO IN

LINE1 IN

LINE2 OUT

LINE2 IN

LINE3 IN

REMOTE CONTROL

SUBWOOFER PREOUT

Getting to Know the Stereo Receiver and CD Player—Continued

10

Names of Each Part (CD Player)

Front Panel

ON/STANDBY

Disc tray

Open/Close[ ] button

[ ]/[ ] buttons

STANDBY LED

Display

Pause [ ] button

Stop [ ] button

Play [ ] button

Rear Panel

ANALOG AUDIO OUTPUT

DIGITAL AUDIO OUTPUT COAXIAL

REMOTE CONTROL

AC INLET

Getting to Know the Stereo Receiver and CD Player—Continued

11

Display

R-1045/1045DAB

SLEEP indicator

Play [ ] and pause [ ] indicators

USB indicator

File format indicators

MP3

WMA

PCM

FOLDER indicator

DIRECT indicator

FILE indicator

MUTING indicator

Playback mode indicators

1FOLDER

MEMORY

RANDOM

REPEAT

REPEAT 1

TIMER indicators

TIMER

1, 2, 3, 4

Tuning indicators

AUTO

FM ST

DAB (R-1045DAB only)

RDS

Message area

TRACK indicator

TITLE, ARTIST, and ALBUM indicators

C-1045

Play and pause indicators

File format indicators

MP3

WMA

FOLDER indicator

FILE indicator

TRACK indicator

Playback mode indicators

MEMORY

RANDOM

REPEAT

REPEAT1

Message area

TITLE, ARTIST, and ALBUM indicators

DISC, TOTAL indicators

REMAIN indicator

Getting to Know the Stereo Receiver and CD Player—Continued

12

Remote Controller

Getting to Know the Stereo Receiver and CD Player—Continued

13

ON/STANDBY

Used to set the stereo receiver to On or Standby.

SLEEP

Used to set and release the setting and display the

status of sleep timer.

DIMMER

Used to change the display brightness.

DISPLAY

Used to indicate the CD or USB elapsed time and

the frequency of radio.

iPod/USB

Used to playback iPod/iPhone and USB.

TUNER

Selects AM, FM, or DAB (R-1045DAB only) as

the input source and play.

LINE1

Used to switch the source selector to LINE1.

LINE2

Used to switch the source selector to LINE2.

CD/COAX

Used to switch the source selector to CD/COAX.

OPTICAL

Used to switch the source selector to OPTICAL.

RANDOM

Used to start random playback when CD/COAX or

USB is selected.

REPEAT

Used to start repeat playback when CD/COAX or

USB is selected.

TIMER

Show the status of the timers.

MENU/NO

Use to display the menu.

FOLDER /

Used to switch the folder of CD (MP3, WMA) and

USB.

[]

Used to pause iPod/iPhone, CD and USB playback.

[]

Used to playback iPod/iPhone, and CD and USB.

[]/[]

Used to switch the iPod/iPhone, CD, USB tracks

and preset channel of radio.

[]

Used to stop iPod/iPhone, CD and USB.

[]/[]

Used to rewind or fast forward CD, USB play back

and adjust the radio tuning.

VOLUME

Adjust the volume level.

DIRECT

Used to invalidate the tone control.

Number buttons

CLEAR

OPEN/CLOSE (C-1045)

Used to open and close the disc tray.

CLOCK CALL

Calls up the clock to display the day and time.

PHONO

Used to switch the source selector to PHONO.

LINE3

Used to switch the source selector to LINE3.

MEMORY

Used to memory playback of CD.

MODE/YES

Used to switch the tuning mode of AM, FM and

DAB (R-1045DAB only).

MUTING

Mutes the output of the receiver.

FOLDER

14

Disc Notes

Precautions for Playback

Compact discs (CDs) with the following logo on the

label surface can be used.

Do not use discs designed for purposes other than

audio, such as CD-ROMs for PC use. Abnormal noise

could damage the speakers or amplifier.

* This CD player supports CD-R and CD-RW discs.

Note that some discs may not playback because of

the disc characteristics, scratches, contamination or

the recording state. A disc recorded with an audio

CD record will not playback unless it is finalized.

Never use discs which have a special shape (such as

hearts or octagons). These types of discs could jam and

damage the CD player. Playback of copy-controlled

audio CDs.

CD playback with copy-control function

Some audio CDs with copy-control function do not

comply with official CD standards. These are special

discs and cannot be played with this CD player.

Playback of MP3 and WMA Discs

MP3 and WMA files recorded on a CD-R/CD-RW can

be played with this CD player.

• Use discs which have been recorded following the

ISO9660 Level 2 file system. (The supported

directory depth is eight levels, the same as ISO9660

Level 1)

Discs recorded with the hierarchical file system

(HFS) cannot be played.

• Up to 99 folders (including the root folder), and up

to 499 files (including root) and files can be

recognized and played.

• Always close the disc tray.

Notes

• A disc recorded with a recorder or personal

computer may not play in some cases. (Cause: Disc’s

characteristics, damaged or dirty disc, dirt on

player’s lens, dew condensation, etc.)

• A disc recorded on a personal computer may not

play because of the application settings or

environment. Record the disc with the proper format.

(Contact the application maker for details.)

• A disc with insufficient storage capacity may not

play back properly.

Playback of MP3 Discs

• Only MP3 files with the extension “.MP3” or

“. mp3” are supported.

• This CD player supports files recorded in MPEG 1

Audio Layer 3 (32-320kbps), with the sampling

frequency of 32/44.1/48kHz.

• Variable bitrates (VBR) between 32kbps and

320kbps are supported. The time information during

VBR playback may not display correctly.

Playback of WMA Discs

• WMA stands for “Windows Media® Audio”, an

audio compression technology developed by

Microsoft Corporation USA.

• Only WMA files with the extension “.WMA” or

“.wma” are supported.

• Encode the WMA file with an application approved

by Microsoft Corporation USA. The file may not

playback correct if encoded with an unapproved

application.

• Variable bitrates (VBR) between 64kbps and

160kbps (32/44.1/48kHz) are supported.

• Copyright-protected WMA files cannot be played

back.

• WMA Pro, Lossless and Voice are not supported.

* Windows Media is a registered trademark or

trademark of Microsoft Corporation in the United

States and/or in other countries.



Disc Notes—Continued

15

Handling Discs

Hold discs by the edge, or by the center hold and edge.

Avoid touching the playback surface (surface with

nothing printed on it).

Do not attach paper or stickers, or write on the

playback or label surface of the disc. Take care not to

scratch or damage the disc.

Precautions for Rental Discs

Do not use discs with residue from cellophane tape,

rental discs with labels which are peeling off, or discs

with decorative labels. This type of disc could get stuck

in the CD player, or could damage the CD player.

Precautions for Inkjet Printable Discs

Do not leave a CD-R/CR-RW having a label printed

with an inkjet printer in the CD player for a long time.

The disc could get stuck in the CD player, or could

damage the CD player.

Remove the disc from the CD player when not being

played, and store it in a case. A freshly printed disc will

stick easily, and should not be played immediately.

Caring for Discs

If the disc is dirty, the CD player will have a hard time

reading signals, and the audio quality may drop. If the

disc is dirty, gently wipe off fingerprints and dust with

a soft cloth. Lightly wipe from the center outwards.

To remove stubborn dust or dirt, wipe

the disc with a soft cloth dampened

with water, and then dry it with a dry

cloth. Do not use cleaning spray for

analog records or antistatic agents, etc.

Never use volatile chemicals such as

benzine or paint thinner as they can impregnate the disc

surface.

Label surface

(printed surface)

Playback

surface

16

Connecting the CD Player

C-1045 Connections

• Don’t connect the power cord until you’ve

completed and double-checked all connections.

• Use the coaxial cable included in the package.

The analog audio cable can be used instead.

• Push plugs in all the way to make good connections

(loose connections can cause noise or malfunctions).

• To prevent interference, keep audio cables away

from power cords and speaker cables.

Notes

The analog audio cable is not supplied.

Caution

When installing the unit, put the stereo receiver on top of the CD Player. Do not put anything on the stereo receiver.

Connections

With (Remote Interactive) you can control the R-1045 together with C-1045. With R-1045 you can use one remote

controller to C-1045.

Notes

• Use only cables for connections.

• It is not necessary to use the cable when using the coaxial cable.

Left (white)

Right (red)

Analog audio

cable

Left (white)

Right (red)

Analog

audio cable

R

L

Coaxial cable

cable

: Signal flow

R-1045

C-1045

17

Connecting Antennas

This section explains how to connect the supplied

indoor FM antenna and AM loop antenna, and how to

connect commercially available outdoor FM and AM

antennas.

The receiver won’t pick up any radio signals without

an antenna connected, so you must connect the antenna

to use the tuner.

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

If you cannot achieve good reception with the supplied

indoor FM antenna, try a commercially available

outdoor FM antenna instead (see page 18).

Connecting the AM Loop Antenna

The supplied indoor AM loop antenna is for indoor use

only.

If you cannot achieve good reception with the supplied

indoor AM loop antenna, try using it with a

commercially available outdoor AM antenna (see page

18).

1

Attach the FM antenna, as shown.

Once the receiver is ready for use, you’ll

need to tune into an FM radio station and

adjust the position of the FM antenna to

achieve the best possible reception.

2

Use thumbtacks or something

similar to fix the FM antenna into

position.

Caution

Be careful that you don’t injure yourself

when using thumbtacks.

DAB antenna jack (R-1045DAB only)

AM antenna jack

FM antenna jack

Insert the plug fully

into the jack.

Thumbtacks, etc.

1

Assemble the AM loop antenna,

inserting the tabs into the base, as

shown.

2

Connect both wires of the AM loop

antenna to the AM push terminals,

as shown.

(The antenna’s wires are not polarity

sensitive, so they can be connected either

way around). Make sure that the wires are

attached securely and that the push

terminals are gripping the bare wires, not

the insulation.

Once the receiver is ready for use, you’ll

need to tune into an AM radio station and

adjust the position of the AM antenna to

achieve the best possible reception.

Keep the antenna as far away as possible

from the receiver, TV, speaker cables, and

power cords.

Push Insert wire Release

Connecting Antennas—Continued

18

Connecting an Outdoor FM Antenna

If you cannot achieve good reception with the supplied

indoor FM antenna, try a commercially available

outdoor FM antenna instead.

Notes

• Outdoor FM antennas work best outside, but usable

results can sometimes be obtained when installed in

anattic or loft.

• For best results, install the outdoor FM antenna well

away from tall buildings, preferably with a clear line

of sight to your local FM transmitter.

• Outdoor antenna should be located away from

possible noise sources, such as neon signs, busy

roads, etc.

• For safety reasons, outdoor antenna should be

situated well away from power lines and other high-

voltage equipment.

• Outdoor antenna must be grounded in accordance

with local regulations to prevent electrical shock

hazards.



Using a TV/FM Antenna Splitter

It’s best not to use the same antenna for both FM and

TV reception, as this can cause interference problems.

If circumstances demand it, use a TV/FM antenna

splitter, as shown.

Connecting an Outdoor AM Antenna

If good reception cannot be achieved using the

supplied AM loop antenna, an outdoor AM antenna

can be used in addition to the loop antenna, as shown.

Outdoor AM antennas work best when installed

horizontally outside, but good results can sometimes be

obtained indoors by mounting horizontally above a

window. Note that the AM loop antenna should be left

connected.

Outdoor antenna must be grounded in accordance with

local regulations to prevent electrical shock hazards.

Connecting the DAB Antenna

(R-1045DAB only)

Notes

If you cannot get a good reception, adjust the position

of the antenna. (See Page 43)

To stereo receiver To TV (or VCR)

TV/FM antenna splitter

Outdoor antenna

AM loop antenna

Insulated antenna cable

1

Screw the supplied DAB antenna’s

plug onto the DAB ANTENNA jack.

Once the stereo receiver is ready for use,

you’ll need to tune into a DAB station and

adjust the position of the DAB antenna to

achieve the best possible reception.

2

Use thumbtacks or something

similar to fix the DAB antenna into

position.

19

Connecting Speakers

Connecting Your Speakers

• Connect the right speaker to the stereo receiver’s right (R) SPEAKERS terminals. Connect the left speaker to the left

(L) SPEAKERS terminals.

• Connect the positive (+) terminal on each speaker to the corresponding positive (+) terminal on the stereo receiver.

Connect the negative (–) terminal on each speaker to the corresponding negative (–) terminal on the stereo receiver.

Use the red wires to connect the positive (+) terminals.

• Connect only speakers with an impedance of

between 4 and 16 ohms. Connecting a speaker with a

lower impedance may damage the speaker.

• Be careful not to short the positive and negative

wires. Doing so may damage the stereo receiver.

• Do not connect both speaker cables to the same L or

R terminals (Fig. 1). Do not connect more than two

speaker terminals to each speaker (Fig. 2).

-Terminal posts-

Strip about 15 mm (5/8") of insulation from the ends of the

speaker cables, and twist the bare wires tightly. Unscrew

the terminal. Fully insert the bare wire, making sure that it’s

touching the threaded shaft in the center. Screw the

terminal tight.

Fig 1 Fig. 2

20

Connecting Other Components

About Connections

Cables and Jacks

No connecting cables are included with the stereo receiver.

Connecting a Subwoofer

The stereo receiver has a SUBWOOFER PRE OUT jack for connecting a powered subwoofer (i.e., a subwoofer with a

built-in amplifier).

Cable Jack Description

Analog audio cable

This cable carries analog audio.

Optical digital audio

cable

This cable carries digital audio.

COAXIAL digital audio

cable

This cable carries digital audio.

R

L

OPTICAL

COAXIAL

Stereo receiver

: Signal fl o w

P o w ered s u b w o o f er

LINE INPUT

Page is loading ...

ONKYO PHA-1045 Owner's manual

This manual is also suitable for

ONKYO PHA-1045 Owner's manual

Related papers

Other documents