2. Computers & electronics
  3. Projectors
  4. Projection screens
  5. HERMA
  6. Show IT

HERMA Show IT User manual

  • Hello! I am an AI chatbot trained to assist you with the HERMA Show IT User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I protect the screen when not in use?
    How do I clean the screen?
    What should I avoid using when cleaning the screen?
    What are the available size formats for the screen?
    How do I extend the support rod?
    How do I lock the screen onto the support rod?
    How do I put the screen away?
    What should I avoid doing when putting the screen away?
2C Show IT
2C406/407/408/409
User Manual
Imported and Distributed in Australia by
Herma Technologies
Factory 4A, 6 Albert St
Preston, VIC 3072
For more information please go to
www.2cdisplays.com.au
or call 1300 730 025
Jun08 V1
Protecting your Screen
To ensure long lasting veiwing enjoyment, always
keep the screen rolled up when not in use.
Examine both the front and back surfaces before
retracting into the case to make sure it is free of
dust, dirt, insects or other foreign matter.
Use a soft brush or cloth to lightly remove any
foreign particles.
CAUTION: Do not let go of the screen when it is
retracting. You can cause damage to the screen or
casing by retracting too quickly.
Cleaning your Screen
NEVER attempt to use any solvents, chemicals or
abrasive cleaners on the screen surface.
Use a mild detergent with warm water to remove
any marks on the surface or screen case. Always
pat the screen dry with a soft cloth of towel
after cleaning.
Oct 2009
Size Format Image
(mm)
Case Length
(mm)
Weight
(kg)
60” 4:3 1220 x 910 1380 4.5
80” 4:3 1630 x 1220 1790 5.4
60” 16:9 1330 x 745 1490 4.8
80” 16:9 1770 x 995 1930 6.2
To the owner
Congratulations on purchasing a 2C
Show IT Protable Screen, designed to
produce the sharpest, most pleasing
pictures with maximum convenience.
Using your screen
1. Lie the screen at on the oor and
swing out the feet so that they are
perpendicular to the casing.
2. Stand the support rod up.
3. Extend the support rod to the desired
height and lock into place.
4. Pull the screen up and hook into the
top of the support rod.
5. Lock the screen onto the support rod
with the handle
6. Extend the Support Rod to the desired
viewing position and lock into place.
The screen can be levelled using the
adjustable feet.
Your screen is now ready for your
viewing enjoyment.
Putting your screen away
Lower the support rod to a comfortable
height before unhooking the screen and
gently lowering into the case.
Do not allow the sceen to y into the case
as this can damage the mechanism and
ruin the screen material.
Lower the support rod. Fold the support
rod and feet away.
Be sure the screen is properly secured
before carrying by the handle.
/