ALC AWSC25 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the ALC AWSC25 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Model AWSC25
Wireless
Outdoor
Security
Camera
Wireless Video Surveillance System
Wireless Made Simple.
QUICK START GUIDE
ACCESSORY
Compatible with ALC AWS2155
Video Surveillance System
CAMERA MOUNTING
NOTE: Cameras are IP66 rated for indoor/outdoor use. For outdoor use it is
recommended to install camera under shelter to protect from direct exposure to
sunlight and other environmental elements. Avoid pointing a camera directly at
any bushes or tree branches or objects that may naturally move due to winds.
CAMERA INSTALLATION + SETUP
1 2 43
Tip: Plan the location of your camera for optimal viewing and proximity to AC Power outlets, (1) power extension
cable is included.
NOTE: Avoid installing in a location which requires the Wireless signal to pass through cement, concrete and metal
structures. This will reduce the transmission range.
Secure the multi-position
camera stand to a stable
surface, ceiling or wall.
Loosen the T-Bolt on the camera
stand and adjust viewing angle using
the Thumb Screw to rotate position.
Align hole on bottom of camera
with T-Bolt to install camera.
Screw antenna into rear of camera.
Attach power cable to power
extension cord AC Adapter.
Plug into electric outlet.
Light Sensor
Signal Indicator
Power Indicator
Infrared LEDs
Antenna
Multi-position
Camera Stand
Thumb screw
Camera Stand
T-Bolt
AC Power cord
In-line Pairing
Button
Indoor/Outdoor Camera
Outdoor camera with
multi-position stand
AC power adapter
Power extension cable
Camera Installation
Screw Pack
Quick Start Guide
IN THE BOX
1
2
3
The AWS2155 Wireless Surveillance System supports up to four
(4) wireless surveillance cameras. Use the following steps to pair
each additional camera.
From the Main Menu on the Control Panel,
select the CAMERA SET UP icon
Then select
camera station
to be paired
Tap the CAMERA STATION you want to pair;
a 30-second timer will start.
Within 30 seconds, press the PAIRING KEY once on the camera’s
power cord. The screen header will change from pairing to paired.
Go to HOME SCREEN to view live cameras on the Control
Panel Monitor.
AC power cable
Camera In-line
Pairing Button
Camera
Pairing
Camera
Activation
Camera Brightness
Adjustment
Let’s Get Started
Model AWSC25
REQUIRES ALC AWS2155 WIRELESS SURVEILLANCE SYSTEM TO WORK.
PAIRING ADDITIONAL
CAMERAS TO CONTROL PANEL
For detailed installation and setup, please refer to the Model AWSC25
extended User’s Guide available on our website:
www.atomslabs.com/support
SCAN
TO VIEW COMPLETE USER’S GUIDE
Ceiling Mount
Surface Mount
/