Toro Power Max 826 O Snowthrower User manual

Category
Snow throwers
Type
User manual

This manual is also suitable for

FormNo.3373-710RevA
PowerMax826O/OESnowthrower
ModelNo.38597—SerialNo.313000001andUp
ModelNo.38629—SerialNo.313000001andUp
Operator'sManual
Introduction
Thismachineisintendedtobeusedbyresidential
homeownersorprofessional,hiredoperators.Itis
designedprimarilyforremovingsnowfrompaved
surfaces,suchasdrivewaysandsidewalks,andother
surfacesfortrafconresidentialorcommercial
properties.Itisnotdesignedforremovingmaterials
otherthansnow.
Readthisinformationcarefullytolearnhowtooperateand
maintainyourmachineproperlyandtoavoidinjuryand
machinedamage.Youareresponsibleforoperatingthe
machineproperlyandsafely.
YoumaycontactTorodirectlyatwww.Toro.comformachine
andaccessoryinformation,helpndingadealer,ortoregister
yourmachine.
Wheneveryouneedservice,genuineToroparts,oradditional
information,contactanAuthorizedServiceDealerorToro
CustomerServiceandhavethemodelandserialnumbersof
yourmachineready.
Figure1identiesthelocationofthe
modelandserialnumbersonthemachine.Writethenumbers
inthespaceprovided.
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhassafety
messagesidentiedbythesafetyalertsymbol(Figure2),
whichsignalsahazardthatmaycauseseriousinjuryordeath
ifyoudonotfollowtherecommendedprecautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanicalinformation
andNoteemphasizesgeneralinformationworthyofspecial
attention.
ReplacementEngineOwner’sManualsmaybeordered
throughtheenginemanufacturer.
Contents
Introduction..................................................................1
Training.................................................................3
Preparation.............................................................3
Operation...............................................................3
MaintenanceandStorage..........................................4
ToroSnowthrowerSafety.........................................4
SoundPressure.......................................................4
SoundPower..........................................................4
Vibration................................................................4
SafetyandInstructionalDecals.................................4
Setup............................................................................7
1InstallingtheUpperHandle....................................7
2InstallingtheTractionControlLinkage....................8
3InstallingtheChuteControlRod.............................9
4FillingtheEnginewithOil.....................................10
5CheckingtheTirePressure....................................10
6CheckingtheSkids...............................................10
7CheckingtheTractionDriveOperation...................10
ProductOverview.........................................................12
Operation....................................................................12
FreewheelingorUsingtheSelf-propelDrive...............12
FillingtheFuelTank...............................................13
StartingtheEngine.................................................14
StoppingtheEngine...............................................15
OperatingtheTractionDrive...................................16
OperatingtheSpeedSelector...................................16
OperatingtheAuger/ImpellerDrive.........................16
OperatingtheQuickStick
®
......................................17
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3373-710*A
UncloggingtheDischargeChute..............................17
PreventingFreeze-up..............................................17
OperatingTips......................................................18
Maintenance.................................................................18
RecommendedMaintenanceSchedule(s)......................18
PreparingforMaintenance.......................................20
CheckingtheEngineOilLevel.................................20
CheckingandAdjustingtheSkidsand
Scraper..............................................................20
CheckingandAdjustingtheTractionCable................20
CheckingtheAugerGearboxOilLevel......................21
ChangingtheEngineOil.........................................21
AdjustingtheDischargeChuteLatch........................22
ReplacingtheDriveBelts.........................................23
Storage........................................................................23
PreparingtheMachineforStorage............................23
RemovingtheMachinefromStorage.........................24
Troubleshooting...........................................................25
2
Safety
ThismachinemeetsorexceedstheISOstandard8437
ineffectatthetimeofproduction.
Readandunderstandthecontentsofthismanualbefore
theengineiseverstarted.
Thisisthesafetyalertsymbol.Itisusedtoalertyou
topotentialpersonalinjuryhazards.Obeyallsafety
messagesthatfollowthissymboltoavoidpossibleinjury
ordeath.
Improperlyusingormaintainingthismachinecould
resultininjuryordeath.Toreducethispotential,
complywiththefollowingsafetyinstructions.
Training
Readtheoperatingandserviceinstructionmanual
carefully.Bethoroughlyfamiliarwiththecontrolsand
theproperuseofthemachine.Knowhowtostopthe
machineanddisengagethecontrolsquickly.
Neverallowchildrentooperatethemachine.Neverallow
adultstooperatethemachinewithoutproperinstruction.
Keeptheareaofoperationclearofallpersons,particularly
smallchildren,andpets.
Exercisecautiontoavoidslippingorfalling,especially
whenoperatinginreverse.
Preparation
Thoroughlyinspecttheareawherethemachineistobe
usedandremovealldoormats,sleds,boards,wires,and
otherforeignobjects.
Disengageallclutchesandshiftintoneutralbefore
startingtheengine.
Donotoperatethemachinewithoutwearingadequate
wintergarments.Wearfootwearwhichwillimprove
footingonslipperysurfaces.
Handlefuelwithcare;itishighlyammable.
Useanapprovedfuelcontainer.
Neveraddfueltoarunningorhotengine.
Fillfueltankoutdoorswithextremecare.Neverll
fueltankindoors.
Replacegasolinecapssecurelyandwipeupspilled
fuel.
Adjustthecollectorhousingheighttocleargravelor
crushedrocksurface.
Neverattempttomakeanyadjustmentswhiletheengine
isrunning(exceptwherespecicallyrecommendedby
manufacturer).
Letengineandmachineadjusttooutdoortemperatures
beforestartingtoclearsnow.
Theoperationofanypoweredmachinecanresultin
foreignobjectsbeingthrownintotheeyes.Alwayswear
safetyglassesoreyeshieldsduringoperationorwhile
performinganadjustmentorrepair.
Operation
Donotputhandsorfeetnearorunderrotatingparts.
Keepclearofthedischargeopeningatalltimes.
Exerciseextremecautionwhenoperatingonorcrossing
graveldrives,walks,orroads.Stayalertforhidden
hazardsortrafc.
Afterstrikingaforeignobject,stoptheengine,remove
thewirefromthespark-plug,thoroughlyinspectthe
machineforanydamage,andrepairthedamagebefore
restartingandoperatingthemachine.
Ifthemachineshouldstarttovibrateabnormally,stopthe
engineandcheckimmediatelyforthecause.Vibrationis
generallyawarningoftrouble.
Stoptheenginewheneveryouleavetheoperating
position,beforeuncloggingthecollector/impeller
housingordischargeguide,andwhenmakinganyrepairs,
adjustments,orinspections.
Whencleaning,repairing,orinspecting,makecertainthe
collector/impellerandallmovingpartshavestopped.
Disconnectthespark-plugwire,andkeepthewireaway
fromtheplugtopreventaccidentalstarting.
Donotruntheengineindoors,exceptwhenstartingit
andformovingthemachineinoroutofthebuilding.
Opentheoutsidedoors;exhaustfumesaredangerous.
Donotclearsnowacrossthefaceofslopes.Exercise
extremecautionwhenchangingdirectiononslopes.Do
notattempttoclearsteepslopes.
Neveroperatethemachinewithoutproperguards,plates,
orothersafetyprotectivedevicesinplace.
Neveroperatethemachinenearglassenclosures,
automobiles,windowwells,drop-offs,etc.withoutproper
adjustmentofthesnowdischargeangle.Keepchildren
andpetsaway.
Donotoverloadthemachinecapacitybyattemptingto
clearsnowattoofastarate.
Neveroperatethemachineathightransportspeedson
slipperysurfaces.Usecarewhenreversing.
Neverdirectdischargeatbystandersorallowanyonein
frontofthemachine.
Disengagepowertothecollector/impellerwhenmachine
istransportedornotinuse.
Useonlyattachmentsandaccessoriesapprovedby
themanufacturerofmachine(suchaswheelweights,
counterweights,cabs,etc.).
Neveroperatethemachinewithoutgoodvisibilityor
light.Alwaysbesureofyourfooting,andkeeparm
holdonthehandles.Walk;neverrun.
3
Neveroperatethemachinewithoutgoodvisibilityor
light.
Takeallpossibleprecautionswhenleavingthemachine
unattended.Shiftintoneutral,settheparkingbrake,stop
theengineandremovethekey.
MaintenanceandStorage
Checkallfastenersatfrequentintervalsforproper
tightnesstobesurethemachineisinsafeworking
condition.
Neverstorethemachinewithfuelinthefueltankinsidea
buildingwhereignitionsourcesarepresentsuchashot
waterandspaceheaters,clothesdryers,etc.Allowthe
enginetocoolbeforestoringinanyenclosure.
Alwaysrefertoowner’sguideinstructionsforimportant
detailsifthemachineistobestoredforanextended
period.
Maintainorreplacesafetyandinstructionslabels,as
necessary.
Runthemachineafewminutesafterthrowingsnowto
preventfreeze-upofthecollector/impeller.
ToroSnowthrowerSafety
ThefollowinglistcontainssafetyinformationspecictoToro
productsorothersafetyinformationthatyoumustknow .
Rotatingrotorbladescaninjurengersorhands.
Staybehindthehandlesandawayfromthedischarge
openingwhileoperatingthemachine.Keepyourface,
hands,feet,andanyotherpartofyourbodyor
clothingawayfrommovingorrotatingparts.
Beforeadjusting,cleaning,repairing,andinspectingthe
machine,andbeforeuncloggingthedischargechute,stop
theengine,removethekey,andwaitforallmoving
partstostop.
Usethesnowcleanouttool,notyourhands,toremove
obstructionsfromthedischargechute.
Beforeleavingtheoperatingposition,stoptheengine,
removethekey,andwaitforallmovingpartstostop.
Donotwearloose-ttingclothingthatcouldgetcaught
inmovingparts.
Ifashield,safetydevice,ordecalisdamaged,illegible,or
lost,repairorreplaceitbeforebeginningoperation.Also,
tightenanyloosefasteners.
Donotsmokewhilehandlinggasoline.
Donotusethemachineonaroof.
Donottouchtheenginewhileitisrunningorsoonafter
ithasstoppedbecausetheenginemaybehotenoughto
causeaburn.
Performonlythosemaintenanceinstructionsdescribedin
thismanual.Beforeperforminganymaintenance,service,
oradjustment,stoptheengine,removethekey,and
disconnectthewirefromthesparkplug.Ifmajorrepairs
areeverneeded,contactanAuthorizedServiceDealer.
Donotchangethegovernorsettingsontheengine.
Whenstoringthemachineformorethan30days,drain
thefuelfromthefueltanktopreventapotentialhazard.
Storefuelinanapprovedfuelcontainer.Removethekey
fromtheignitionswitchbeforestoringthemachine.
PurchaseonlygenuineTororeplacementpartsand
accessories.
SoundPressure
Thismachinehasasoundpressurelevelattheoperator’sear
of87dBA,whichincludesanUncertaintyValue(K)of1
dBA.Thesoundpressurelevelwasdeterminedaccordingto
theproceduresoutlinedinENISO11201.
SoundPower
Thismachinehasaguaranteedsoundpowerlevelof102
dBA,whichincludesanUncertaintyValue(K)of2dBA.
Thesoundpowerlevelwasdeterminedaccordingtothe
proceduresoutlinedinENISO3744.
Vibration
Measuredvibrationlevelforthelefthand=3.4m/s
2
.
Measuredvibrationlevelfortherighthand=4.5m/s
2
.
UncertaintyValue(K)=2.3m/s
2
.
Themeasuredvaluesweredeterminedaccordingtothe
proceduresoutlinedinENISO20643.
SafetyandInstructional
Decals
Important:Safetyandinstructiondecalsarelocated
nearareasofpotentialdanger.Replacedamageddecals.
4
106-4525
Reorderpartno.112-6633
1.Fast
3.Slow
2.Forwardspeeds4.Reversespeeds
107-3040
1.Cuttingdismemberment,impellerandcutting
dismemberment,augerhazards—keepbystandersasafe
distancefromthemachine.
112-6625
Reorderpartno.112-6629
1.Cutting/dismembermenthazard,impeller—donotplace
yourhandinthechute;stoptheenginebeforeleavingthe
operator'sposition,usethetooltoclearthechute.
112-6626
1.Tractiondrive—squeezetheleverto
engage;releasethelevertodisengage.
3.Cutting/dismembermenthazard,
impeller—donotplaceyourhandinthe
chute;stoptheenginebeforeleaving
theoperator'sposition,usethetool
clearthechute.
5.Thrownobjecthazard—keep
bystandersasafedistancefromthe
machine.
2.Warning—readtheOperator'sManual.4.Cutting/dismembermenthazard,
impellerandauger—stayawayfrom
movingparts,keepallguardsand
shieldsinplace;removetheignition
keyandreadtheinstructionsbefore
servicingorperformingmaintenance.
6.Auger/impellerdrive—squeezethe
levertoengage;releasetheleverto
disengage.
5
Briggs&StrattonPartNo.273676
1.Stop
3.Fast
2.Slow
Briggs&StrattonPartNo.275949
1.Chokeon(Choke)2.Chokeoff(Run)
Briggs&StrattonPartNo.276925
1.Warning—readthe
Operator'sManual.
3.Warning—toxicgas
inhalationhazard.
2.Warning—rehazard.
4.Warning—hot
surface/burnhazard.
Briggs&StrattonPartNo.277566
1.Whenstartingacold
engine,closethechoke
andpresstheprimertwo
times.
2.Whenstartingawarm
engine,openthechoke
anddonotpressthe
primer.
Briggs&StrattonPartNo.277588
1.Primer3.Ignitionkeyout
(Engine—Stop)
2.Ignitionkeyin
(Engine—Run)
Briggs&StrattonPartNo.278866
1.Fuel—On2.Fuel—Off
6
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
Handlebolts4
Curvedwashers
4
1
Locknuts4
Installtheupperhandle.
2
Nopartsrequired
Installthetractioncontrollinkage.
Carriagebolts
2
3
Locknuts2
Installthechutecontrolrod.
4
Nopartsrequired
Filltheenginewithoil.
5
Nopartsrequired
Checkthetirepressure.
6
Nopartsrequired
Checktheskids.
7
Nopartsrequired
Checktheoperationofthetractiondrive.
1
InstallingtheUpperHandle
Partsneededforthisprocedure:
4Handlebolts
4
Curvedwashers
4Locknuts
Procedure
Note:Donotremovetherubberbandonthecablesuntil
youhaveinstalledtheupperhandle.
1.Liftandrotatetheupperhandleandpositionitover
thelowerhandle(Figure3).
Important:Routethecablesattachedtothe
QuickStickinsidetheupperhandleleg.
Figure3
1.Cables
2.Securetheupperhandlewith4handlebolts,4curved
washers,and4locknutsfromtheloosepartsbag
(Figure4).
7
Figure4
2
InstallingtheTractionControl
Linkage
NoPartsRequired
Procedure
1.Removethehairpincotterandwasherfromthelower
endofthespeedcontrolrodandinsertthelowerend
oftherodintothelowerlinkarmsothatthebentend
ofthespeedcontrolrodfacesrearward(Figure5).
Figure5
2.Securethelowerendofthespeedcontrolrodwiththe
washerandhairpincotterthatyoupreviouslyremoved.
3.Removethehairpincotterandtheouterwasherfrom
thetrunnionontheupperendofthespeedcontrol
rod(
Figure6).
Figure6
1.Speedselectorlever
3.Innerwasher
2.Trunnion
4.Outerwasher
Note:Tomakeinstallationeasier,leavetheatwasher
onthetrunnion(Figure6).
4.ShiftthespeedselectorleverintoPositionR2.
5.Rotatethelowerlinkarmfullyupward
(counterclockwise)(Figure7).
Figure7
6.Liftuponthespeedcontrolrodandinsertthetrunnion
intotheholeinthespeedselectorlever(Figure6).
Note:Ifthetrunniondoesnottintothehole
whenyouliftuponthespeedcontrolrod,rotatethe
trunnionupwardordownwardonthespeedcontrol
roduntilitts.
7.Securethetrunnionandupperendofthespeedcontrol
rodwiththeouterwasherandahairpincotteryou
previouslyremoved.
8
Note:Foreasierinstallation,lookdownthroughthe
openinginthespeedselector(Figure8).
Figure8
1.Speedselector
3
InstallingtheChuteControl
Rod
Partsneededforthisprocedure:
2
Carriagebolts
2Locknuts
Procedure
1.UnwraptheQuickStickandrotateitsothatitis
uprightandinthecenter.
2.Holdthebluetriggercapdownandpulltheleverfully
rearward.
Note:Thedischargechuteanddeectorshouldface
forward.Iftheydonot,holdthebluetriggercap
down(butdonotmovetheQuickStick)androtatethe
dischargechuteuntiltheydo.
3.Aligntheattenedbackendofthelongchutecontrol
rodwiththeattenedfrontendoftheshortrod
thatextendsfromthecontrolpanelsothattheynest
together(Figure9).
Figure9
1.Shortrod
2.Longchutecontrolrod
4.Insertthefrontendoftherodintotheopeningin
thebackofthechutegearcoveruntilitslidesintothe
chutegear(Figure10).
Figure10
5.Aligntheholesinthenestedendsoftherodsand
insert2carriagebolts(intheloosepartsbag)through
theshortrodfromtheleftsideofthemachine(from
theoperatingposition).
6.Insertthecableclipthatsupportsthedeector
cableontotheforwardcarriagebolt,andsecurethe
carriageboltswithlocknutsfromtheloosepartsbag
(Figure11).
Figure11
1.Cableclip2.Deectorcable
9
7.HoldthebluetriggercapdownandrotatetheQuick
Stickinacircletoensurethatthechuteanddeector
operatesmoothly.
4
FillingtheEnginewithOil
NoPartsRequired
Procedure
Yourmachinecomeswithoilintheenginecrankcase.
Note:Beforestartingtheengine,checktheoilleveland
addoilifnecessary.
UseautomotivedetergentoilwithanAPIserviceclassication
ofSF,SG,SH,SJ,SL,orhigher.Refertoyourengineowner's
manual.
Use
Figure12belowtoselectthebestoilviscosityforthe
outdoortemperaturerangeexpected:
Figure12
1.UsingSAE30atoutdoor
temperaturesbelow40°F
(4°C)willresultinhard
starting.
2.Using10W-30atoutdoor
temperaturesabove
80°F(27°C)mayresultin
increasedoilconsumption;
therefore,checktheoil
levelmorefrequentlyin
thesecircumstances.
EngineOilCapacities
Model
EngineOilCapacity
38597
38629
18to20oz.(0.53to0.59l)
1.Removethedipstickandslowlypouroilintothe
oillltubetoraisetheoilleveltotheFullmarkon
thedipstick.Donotoverll(
Figure13).Referto
CheckingtheEngineOilLevelinMaintenance.
Figure13
2.Installthedipsticksecurely.
Note:Donotspilloilaroundtheoillltube;oilcould
leakontotractionpartsandcausethetractiontoslip.
5
CheckingtheTirePressure
NoPartsRequired
Procedure
Thetiresareoverinatedatthefactoryforshipping.Reduce
thepressureequallyinbothtirestobetween17and20psi
(116and137kPa).
6
CheckingtheSkids
NoPartsRequired
Procedure
RefertoCheckingandAdjustingtheSkidsinMaintenance.
10
7
CheckingtheTractionDrive
Operation
NoPartsRequired
Procedure
CAUTION
Ifthetractiondriveisnotproperlyadjusted,the
machinemaymoveinthedirectionoppositeof
whatyouintended,causinginjuryand/orproperty
damage.
Carefullycheckthetractiondriveandadjustit
properly,ifnecessary.
1.Starttheengine;refertoStartingtheEngine.
2.MovethespeedselectortoPositionR1;referto
OperatingtheSpeedSelector.
3.Squeezethelefthand(traction)levertothehand-grip
(Figure14).
Figure14
Themachineshouldmoverearward.Ifthemachine
doesnotmoveormovesforward,completethe
following:
A.Releasethetractionleverandstoptheengine.
B.Disconnectthetrunnionfromthespeedselector
lever(
Figure6).
C.Turnthetrunniondownward(clockwise)onthe
speedcontrolrod(Figure6).
D.Connectthetrunniontothespeedselectorlever
(
Figure6).
4.Releasethetractionlever.
5.MovethespeedselectortothePosition1;referto
OperatingtheSpeedSelector.
6.Squeezethelefthand(traction)levertothehand-grip
(Figure14).
Themachineshouldmoveforward.Ifthemachine
doesnotmoveormovesrearward,completethe
following:
A.Releasethetractionleverandstoptheengine.
B.Disconnectthetrunnionfromthespeedselector
lever(
Figure6).
C.Turnthetrunnionupward(counterclockwise)on
thespeedcontrolrod(Figure6).
D.Connectthetrunniontothespeedselectorlever
(Figure6).
7.Ifyoumadeanyadjustments,repeatthisprocedure
untilnoadjustmentsarerequired.
Important:Ifthemachinemoveswhenthetraction
leverisinthereleasedposition,checkthetractioncable
(refertoCheckingandAdjustingtheTractionCable)or
takethemachinetoanAuthorizedServiceDealerfor
service.
11
ProductOverview
g018609
Figure15
1.Hand-grip(2)
9.Dischargechute
2.Auger/impellerlever10.Scraper
3.Speedselectorlever
11.Auger
4.QuickStick™discharge
chutecontrol
12.Skid(2)
5.Tractionlever
13.Electricstarterbutton(only
38629)
6.Fueltankcap
14.Electricstarterplug(only
38629)
7.Engineoillltube/dipstick15.Snowcleanouttool
8.Chutedeector
Figure16
1.Choke
5.Recoilstarter
2.Ignitionswitch
6.Oildrainplug
3.Fuelshutoffvalve
7.Primer
4.Throttle
Figure17
1.Snowcleanouttool(attachedtothehandle)
Operation
Note:Determinetheleftandrightsidesofthemachine
fromthenormaloperatingposition.
FreewheelingorUsingthe
Self-propelDrive
Todisengagetheself-propeldrive(freewheel)whenstoring
thesnowthrower,slidethewheelsinwardandinserttheaxle
pinsthroughtheouteraxleholes,butnotthroughthewheel
hubs(Figure18).
Figure18
Toengagetheself-propeldriveforoperatingthesnowthrower,
slidethewheelsoutwardandinserttheaxlepinsthroughthe
holesinthewheelhubsandtheinneraxleholes(Figure19).
Figure19
12
FillingtheFuelTank
DANGER
Gasolineisextremelyammableandexplosive.A
reorexplosionfromgasolinecanburnyouand
others.
Topreventastaticchargefromignitingthe
gasoline,placethecontainerand/ormachine
onthegroundbeforelling,notinavehicleor
onanobject.
Fillthetankoutdoorswhentheengineiscold.
Wipeupspills.
Donothandlegasolinewhensmokingoraround
anopenameorsparks.
Storegasolineinanapprovedfuelcontainer,out
ofthereachofchildren.
Forbestresults,useonlyclean,fresh,unleadedgasoline
withanoctaneratingof87orhigher((R+M)/2rating
method).
Oxygenatedfuelwithupto10%ethanolor15%MTBE
byvolumeisacceptable.
DoNotuseethanolblendsofgasoline(suchasE15
orE85)withmorethan10%ethanolbyvolume.
Performanceproblemsand/orenginedamagemayresult
whichmaynotbecoveredunderwarranty.
DoNotusegasolinecontainingmethanol.
DoNotstorefueleitherinthefueltankorfuelcontainers
overthewinterunlessafuelstabilizerisused.
DoNotaddoiltogasoline.
Important:Toreducestartingproblems,addfuel
stabilizertothefuelallseason,mixingitwithgasoline
lessthan30daysold.
Do not add oil to the gasoline.
Figure20
1.1-1/2inch(3.8cm)
13
StartingtheEngine
1.Checktheengineoillevel.RefertoCheckingthe
EngineOilLevelinMaintenance.
2.Turnthefuelshutoffvalve1/4turncounterclockwise
toopenit(Figure21).
Figure21
3.Inserttheignitionkey(Figure22).
Figure22
1.Ignitionkey
4.Firmlypushintheprimerwithyourthumb2times
(15°For-9°Corabove)or4times(below15°For
-9°C),holdingtheprimerinforasecondbefore
releasingiteachtime(Figure23).
Figure23
5.RotatethechoketotheChokeposition(Figure24).
Figure24
6.MovethethrottletotheFastposition(Figure25).
Figure25
7.Startthemachinepullingtherecoilstarterorpressing
theelectric-starterbutton(only38629)(Figure26).
14
Figure26
1.Electric-starterbutton
(only38629)
3.Recoilstarter
2.Electricstarterplug(only
38629)
Note:Tousetheelectricstarter,connectapowercord
totheelectricstarterplugrstandthentoapower
outlet(only38629).
Important:Topreventdamagingtheelectric
starter,runitinshortcycles(5secondsmaximum,
thenwaitoneminutebeforetryingtostartit
again).Iftheenginestilldoesnotstart,take
themachinetoanAuthorizedServiceDealerfor
service(only38629).
8.Disconnectthepowercordfromthepoweroutletrst
andthenfromthemachine(only38629).
9.Allowtheenginetowarmupforseveralminutes,move
thechoketowardtheRunposition.Waitfortheengine
torunsmoothlybeforeeachchokeadjustment.
CAUTION
Ifyouleavethemachinepluggedintoa
poweroutlet,someonecaninadvertentlystart
themachineandinjurepeopleordamage
property.
Unplugthepowercordwheneveryouarenot
startingthemachine.
StoppingtheEngine
1.MovethethrottletotheSlowposition,andthentothe
Stopposition(Figure27).
Figure27
2.Waitforallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removetheignitionkey.
4.Closethefuelshutoffvalvebyrotatingitclockwise
(Figure28).
Figure28
5.Pulltherecoilstarter3or4times.Thishelpsprevent
therecoilstarterfromfreezingup.
15
OperatingtheTractionDrive
CAUTION
Ifthetractiondriveisnotproperlyadjusted,the
machinemaymoveinthedirectionoppositeof
whatyouintended,causinginjuryand/orproperty
damage.
Carefullycheckthetractiondriveandadjustit
properly,ifnecessary;refertoCheckingtheTraction
DriveOperationinSetupformoreinformation.
Important:Ifthemachinemoveswhenthetraction
leverisinthereleasedposition,checkthetractioncable
(refertoCheckingandAdjustingtheTractionCable)or
takethemachinetoanAuthorizedServiceDealerfor
service.
1.Toengagethetractiondrive,squeezethelefthand
(traction)levertothehand-grip(Figure29).
Figure29
2.Tostopthetractiondrive,releasethetractionlever.
OperatingtheSpeedSelector
Thespeedselectorhas6forwardand2reversegears.To
changespeeds,releasethetractionleverandshiftthespeed
selectorlevertothedesiredposition(Figure30).Thelever
locksinanotchateachspeedselection.
Figure30
OperatingtheAuger/Impeller
Drive
1.Toengagetheauger/impellerdrive,squeezethe
righthand(auger/impeller)levertothehandgrip
(Figure31).
Figure31
2.Tostoptheaugerandimpeller,releasetherighthand
lever.
Important:Whenyouengageboththe
auger/impellerleverandthetractionlever,the
tractionleverlockstheauger/impellerleverdown,
freeingyourrighthand.Toreleasebothlevers,
simplyreleasethelefthand(traction)lever.
3.Iftheaugerandimpellercontinuetorotatewhenyou
releasetheauger/impellerlever,donotoperatethe
machine.Checktheauger/impellercable(referto
CheckingandAdjustingtheAuger/ImpellerCable)
andadjustitifnecessary.Otherwise,takethemachine
toanAuthorizedDealerforservice.
16
WARNING
Iftheaugerandimpellercontinuetorotate
whenyoureleasetheauger/impellerlever,you
couldseriouslyinjureyourselforothers.
Donotoperatethemachine.Takeittoan
AuthorizedServiceDealerforservice.
OperatingtheQuickStick
®
HoldthebluetriggercapdowntousetheQuickStickto
movethedischargechuteandthechutedeector.Releasethe
triggercaptolockthedischargechuteandchutedeector
intoposition(Figure32).
Figure32
MovingtheDischargeChute
HoldthebluetriggercapdownandmovetheQuickStick
tothelefttomovethedischargechutetotheleft;movethe
QuickSticktotherighttomovethedischargechutetothe
right(Figure33).
Figure33
Ifthechutedoesnotmove,refertoAdjustingthe
DischargeChuteLatch.
Ifthechutedoesnotturnasfartotheleftasitdoesto
theright,ensurethatthecableisroutedtotheinsideof
thehandles.RefertoInstallingtheUpperHandle.
Ifthechutedoesnotlockintoplacewhenyoureleasethe
triggercap,refertoAdjustingtheDischargeChuteLatch.
MovingtheChuteDeector
HoldthebluetriggercapdownandmovetheQuickStick
forwardtolowerthechutedeector;moveitrearwardtoraise
thechutedeector(Figure34).
Figure34
UncloggingtheDischarge
Chute
Iftheauger/impellerisrunningbutthereisnosnowcoming
outofthedischargechute,thedischargechutemaybe
clogged.
Tounclogthedischargechute,stayintheoperating
positionandreleasethelefthand(traction)lever.While
runningtheauger/impeller,pushdownonthehandlesto
raisethefrontofthemachineafewinches(centimeters)
offthepavement.Thenliftthehandlesquicklytobump
thefrontofthemachineonthepavement.Repeatif
necessaryuntilastreamofsnowcomesoutthedischarge
chute.
Ifyoucannotunclogthedischargechutebybumping
thefrontofthemachine,stoptheengine,waitforall
movingpartstostop,andusethesnowclean-out
toolorastick;neveruseyourhand.
Important:Uncloggingthedischargechuteby
bumpingthefrontofthemachineonthepavement
maycausetheskidstomove.Adjusttheskidsand
tightentheskidboltssecurely.
PreventingFreeze-up
Insnowyandcoldconditions,somecontrolsandmoving
partsmayfreeze.Donotuseexcessiveforcewhen
tryingtooperatefrozencontrols.Ifyouhavedifculty
17
operatinganycontrolorpart,starttheengineandletit
runforafewminutes.
Afterusingthemachine,lettheenginerunforafew
minutestopreventmovingpartsfromfreezing.Engage
theauger/impellertoclearanyremainingsnowfrom
insidethehousing.RotatetheQuickSticktopreventit
fromfreezing.Stoptheengine,waitforallmovingparts
tostop,andremovealliceandsnowfromthemachine.
Withtheengineoff,pulltherecoilstarterhandleseveral
timesandpushtheelectric-starterbuttononce(allmodels
except38597)topreventtherecoilandelectricstarters
fromfreezingup.
OperatingTips
DANGER
Whenthemachineisinoperation,theimpellerand
augercanrotateandcutofforinjurehandsandfeet.
Beforeadjusting,cleaning,inspecting,
troubleshooting,orrepairingthemachine,stop
theengineandwaitforallmovingpartstostop.
Disconnectthewirefromthesparkplugand
keepitawayfromtheplugtopreventsomeone
fromaccidentallystartingtheengine.
Removeanobstructionfromthedischarge
chute;refertoUncloggingtheDischargeChute.
Ifnecessary,usethesnowclean-outtoolora
stick,notyourhands,toremoveanobstruction
fromthedischargechute.
Staybehindthehandlesandawayfromthe
dischargeopeningwhileoperatingthemachine.
Keepface,hands,feet,andanyotherpartof
yourbodyorclothingawayfromconcealed,
moving,orrotatingparts.
WARNING
Therotorbladescanthrowstones,toys,andother
foreignobjectsandcauseseriouspersonalinjuryto
theoperatorortobystanders.
Keeptheareatobeclearedfreeofallobjects
thattherotorbladescouldpickupandthrow.
Keepallchildrenandpetsawayfromthearea
ofoperation.
AlwayssetthethrottletotheFastpositionwhenthrowing
snow .
Iftheengineslowsdownunderaloadorthewheelsslip,
shiftthemachineintoalowergear.
Ifthefrontofthemachineridesup,shiftthemachine
intoalowergear.Ifthefrontcontinuestorideup,liftup
onthehandles.
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst2hours
Inspectthetractioncableandadjustitifnecessary.
Aftertherst5hours
Changetheengineoil.
Beforeeachuseordaily
Checktheengineoillevelandaddoilifnecessary.
Every50hours
Changetheengineoil.Changetheengineoilevery25operatinghourswhen
operatingtheengineunderaheavyload.
18
MaintenanceService
Interval
MaintenanceProcedure
Yearly
Checktheskidsandthescraperandadjustthemifnecessary.
Inspectthetractioncableandadjustorreplaceitifnecessary.
Checktheaugergearboxoilandaddoilifnecessary.
Yearlyorbeforestorage
Checktheairpressureinthetiresandinatethemto17–20psi(116–137kPa).
Drainthegasolineandruntheenginetodryoutthefueltankandthecarburetorat
theendoftheseason.
HaveanAuthorizedServiceDealerinspectandreplacethetractiondrivebeltand/or
theauger/impellerdrivebelt,ifnecessary.
Important:Youcanndmoreinformationaboutmaintainingandservicingyourmachineatwww.Toro.com.
Important:Refertoyourengineoperator'smanualforadditionalmaintenanceprocedures.Forengineadjustments,
repairs,orwarrantyservicenotcoveredinthismanual,contactanAuthorizedBriggs&StrattonServicingDealer.
19
PreparingforMaintenance
1.Movethemachinetoalevelsurface.
2.Stoptheengineandwaitforallmovingpartstostop.
3.Disconnectthesparkplugwire.RefertoReplacing
theSparkPlug.
CheckingtheEngineOilLevel
ServiceInterval:Beforeeachuseordaily—Checktheengine
oillevelandaddoilifnecessary.
1.Removethedipstick,wipeitclean,thenfullyinstall
thedipstick.
2.Removethedipstickandchecktheoillevel(
Figure35).
IftheoillevelisbelowtheAddmarkonthedipstick,
addoil.RefertoFillingtheEnginewithOil.
Figure35
CheckingandAdjustingthe
SkidsandScraper
ServiceInterval:Yearly—Checktheskidsandthescraper
andadjustthemifnecessary.
Checktheskidsandthescrapertoensurethattheaugerdoes
notcontactthepavedorgravelsurface.Adjusttheskidsand
thescraperasneededtocompensateforwear.
1.Checkthetirepressure.RefertoCheckingtheTire
Pressure.
2.Loosenthenutsthatsecurebothskidstotheauger
sidesuntiltheskidsslideupanddowneasily(
Figure36).
Figure36
1.1/2inch(1.3cm)
3.Supportthesideplatessothattheyareatleast1/2
inch(1.3cm)abovealevelsurface.
Important:Theaugerbladesmustbesupported
abovethegroundbytheskids.
4.Ensurethatthescraperis1/8inch(3mm)aboveand
paralleltoalevelsurface.
Note:Ifthepavementiscracked,rough,oruneven,
adjusttheskidstoraisethescraper.Forgravelsurfaces,
adjusttheskidsfurtherdowntopreventthemachine
frompickinguprocks.
5.Movetheskidsdownuntiltheyareevenwiththe
ground.
6.Firmlytightenthenutsthatsecurebothskidstothe
augersides.
Note:Toquicklyadjusttheskidsiftheyloosen,
supportthescraper1/8inch(3mm)offthepavement,
thenadjusttheskidsdowntothepavement.
Note:Iftheskidsbecomeexcessivelyworn,youcan
turnthemoverandsettheunusedsidetowardthe
pavement.
CheckingandAdjustingthe
TractionCable
ServiceInterval:Aftertherst2hours—Inspectthe
tractioncableandadjustitifnecessary.
Yearly—Inspectthetractioncableand
adjustorreplaceitifnecessary.
Ifthemachinedoesnotdriveintheforwardorreversespeeds
oritdriveswhenyoureleasethetractionlever,adjustthe
tractioncable.
Withthetractionleverdisengaged,checkthepininthe
elongatedslotintheleftsideofthemachineabovethe
tire.Thereshouldbeagapof1/32to1/16inch(1to1.5
mm)fromthefrontoftheslottothefrontedgeofthepin
(
Figure37).
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Toro Power Max 826 O Snowthrower User manual

Category
Snow throwers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI